1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your SHIMANO TOURNEY RD-TY200 Rear Derailleur. The RD-TY200 series offers reliable shifting performance for mountain bikes (MTB) and other bicycles equipped with 6 or 7-speed SIS Index Shifting drivetrains. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Safety Information
- Always wear appropriate safety gear when working on your bicycle.
- Ensure all bolts are tightened to the manufacturer's recommended torque specifications. Overtightening or undertightening can lead to component failure.
- Keep hands and clothing clear of moving parts, especially the chain and derailleur pulleys, during operation.
- If you are unsure about any installation or adjustment procedure, consult a professional bicycle mechanic.
- Regularly inspect your derailleur for any signs of damage, wear, or loose components.
3. Specifications
The SHIMANO TOURNEY RD-TY200 rear derailleur is available in two main variants:
RD-TY200-GS (Medium Cage)
- Gears: 3x6/7-speed (front triple with rear 14-28T only)
- Type: Rear Derailleur, Medium Cage
- Shifting System: SIS Index Shifting compatible
- Construction: Double tension
- Design: Sporty, black finish
RD-TY200-SS (Short Cage)
- Gears: 1x6/7-speed
- Type: Rear Derailleur, Short Cage
- Shifting System: SIS Index Shifting compatible
- Construction: Double tension
- Ground Clearance: Sufficient for 18" bikes
- Compatible Gear Combinations:
- 14-28T, 14-34T (MF-TZ510)
- 12-28T, 12-32T (CS-HG200-7)
General Specifications
| Attribute | Value |
|---|---|
| Brand Name | SHIMANO |
| Model Number | RD-TY200 |
| Gears | 7 Speed (also 6 Speed compatible) |
| Material | Alloy |
| Type | Rear Derailleur |
| Components | Derailleurs |
| Origin | MY (Origin) |
4. Package Contents
Your SHIMANO TOURNEY RD-TY200 Rear Derailleur package typically includes:
- 1 x SHIMANO TOURNEY RD-TY200 Rear Derailleur (GS or SS model as selected)
- Depending on the specific model and attachment type, additional components may include:
- Adapter Bolt (M5 x 11.5) & Nut
- Cable Fixing Bolt Unit
- Stroke Adjusting Screws (M4 x 18.7) & Plates
- Cable Adjustment Barrel Unit
- B-Axle & Spacer (Direct Attachment Type)
Please check the packaging for a complete list of included items.
5. Setup and Installation
Proper installation is crucial for the performance and longevity of your derailleur. If you are not confident in performing the installation yourself, please seek assistance from a qualified bicycle mechanic.
5.1. Component Overview and Attachment Types
The RD-TY200 derailleur supports both Direct Attachment Type and Reversed Adapter Type installations. Refer to the diagram below for an exploded view of the components and their interchangeability with other SHIMANO models.
5.2. Exploded View and Parts List
The following diagram illustrates the components of the RD-TY200 derailleur. Refer to this for assembly and replacement of parts.
| Item No. | SHIMANO Code No. | Description | Interchangeability (A=Same, B=Usable but different) |
|---|---|---|---|
| 1 | Y54M98030 | Adapter Bolt (M5 x 11.5) & Nut | A (RD-TY500, RD-TZ500, RD-TY21-B) |
| 2 | Y3EP98030 | Cable Fixing Bolt Unit | A (RD-TY500, RD-TZ500, RD-TY21-B) |
| 3 | Y5FY98040 | Stroke Adjusting Screws (M4 x 18.7) & Plates | A (RD-TY500, RD-TZ500, RD-TY21-B) |
| 4 | Y3EP98020 | Cable Adjustment Barrel Unit | B (RD-TY500, RD-TZ500, RD-TY21-B) |
| 5 | Y5WS98020 | B-Axle & Spacer (Direct Attachment Type) | A (RD-TY500, RD-TZ500, RD-TY21-B) |
Note: 'A' indicates same parts. 'B' indicates parts are usable but differ in materials, appearance, finish, size, etc. Absence of a mark indicates non-interchangeability.
5.3. General Installation Steps (Overview)
- Mount the Derailleur: Attach the derailleur to the derailleur hanger on your bicycle frame. Ensure it is securely fastened according to the specific attachment type (direct or with adapter).
- Install the Chain: Route the bicycle chain through the derailleur pulleys correctly.
- Connect the Shift Cable: Route the shift cable from the shifter to the derailleur and secure it with the Cable Fixing Bolt Unit (Item 2). Ensure there is no slack.
- Adjust Limit Screws: Set the high (H) and low (L) limit screws to prevent the chain from overshifting off the smallest or largest cogs.
- Adjust B-Tension Screw: Adjust the B-tension screw to set the proper distance between the upper guide pulley and the largest cog.
- Fine-tune Shifting: Use the Cable Adjustment Barrel Unit (Item 4) to fine-tune cable tension for smooth and precise shifting across all gears.
For detailed, step-by-step instructions, please refer to the official SHIMANO dealer's manual or consult a professional.
6. Operating Instructions
The SHIMANO TOURNEY RD-TY200 derailleur operates with SIS (SHIMANO Index System) shifters, providing crisp and precise gear changes.
6.1. Shifting Gears
- To shift to a larger cog (easier gear), push the shifter lever that releases cable tension.
- To shift to a smaller cog (harder gear), push the shifter lever that pulls cable tension.
- Always pedal forward while shifting to ensure smooth transitions and prevent damage to the drivetrain.
- Avoid shifting under heavy load (e.g., pedaling hard uphill) as this can strain the chain and derailleur.
6.2. Product Demonstration Video
7. Maintenance
Regular maintenance will extend the life of your derailleur and ensure consistent performance.
7.1. Cleaning
- Periodically clean the derailleur, especially the pulleys, to remove dirt, grime, and old lubricant.
- Use a degreaser specifically designed for bicycle components and a brush to clean thoroughly.
- Rinse with water and dry completely before lubricating.
7.2. Lubrication
- Apply a small amount of bicycle-specific lubricant to the pivot points of the derailleur and the pulley bearings.
- Wipe off any excess lubricant to prevent attracting dirt.
7.3. Inspections
- Check for bent derailleur hanger or cage. A bent hanger can cause poor shifting.
- Inspect pulley wheels for wear. Worn pulleys can lead to noisy operation and poor chain retention.
- Ensure all bolts are secure and not corroded.
- Check shift cable and housing for fraying or damage. Replace if necessary.
8. Troubleshooting
Common shifting issues can often be resolved with simple adjustments.
8.1. Poor Shifting / Skipping Gears
- Cable Tension: If shifting is slow or hesitant, especially when shifting to smaller cogs, the cable tension might be too low. Turn the Cable Adjustment Barrel Unit (Item 4) counter-clockwise in small increments to increase tension. If shifting is slow or hesitant when shifting to larger cogs, tension might be too high. Turn the barrel adjuster clockwise to decrease tension.
- Limit Screws: Incorrectly set H (High) or L (Low) limit screws can prevent the derailleur from reaching the outermost or innermost cogs, or cause the chain to fall off. Adjust these screws carefully, ensuring the derailleur cage aligns with the smallest and largest cogs respectively.
- Bent Derailleur Hanger: A bent hanger is a common cause of poor shifting. Visually inspect the hanger for straightness. If bent, it needs to be straightened or replaced by a professional.
- Worn Drivetrain Components: Worn chain, cassette, or chainrings can also lead to poor shifting. Inspect these components for wear and replace if necessary.
8.2. Noisy Operation
- Lack of Lubrication: Ensure the chain and derailleur pivot points are adequately lubricated.
- Dirt/Grime: Clean the derailleur and chain thoroughly.
- Worn Pulleys: Inspect the derailleur pulleys for excessive wear. Replace if worn out.
9. User Tips
- For bicycles with 406 wheels, a 14-34T 7-speed extension hanger can be very suitable for optimal gear range.
- When replacing an old derailleur, ensure the new part is correctly aligned and adjusted for a noticeable improvement in shifting performance.
10. Warranty and Support
SHIMANO products are manufactured to high standards and are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official SHIMANO website or contact your authorized SHIMANO dealer.
For further technical support or service, please contact your local SHIMANO dealer or visit the official SHIMANO support page. You can also refer to the comprehensive user manual PDF for more detailed information: SHIMANO TOURNEY RD-TY200 User Manual (PDF).