1. Product Overview
This manual provides instructions and information for the HONGWIN OEM Engine Knock Sensor, designed for various Toyota and Lexus vehicles. The knock sensor is a critical component of your vehicle's engine management system, detecting abnormal combustion (knocking or pinging) and sending signals to the engine control unit (ECU) to adjust ignition timing, thereby preventing engine damage and optimizing performance.

Figure 1: HONGWIN Engine Knock Sensor (Model 89615-20090) and its packaging.
2. Safety Information
- Always ensure the vehicle's engine is turned off and cool before attempting any installation or inspection.
- Disconnect the vehicle's battery before working on electrical components to prevent electrical shock or damage to the vehicle's systems.
- Wear appropriate personal protective equipment (PPE), such as gloves and eye protection.
- Handle the sensor and its electrical connector with care to avoid damage.
- WARNING: To avoid danger of suffocation, keep any plastic packaging bags away from babies and children. Do not use this bag in cribs, beds, carriages, or play pens. This bag is not a toy.
3. Setup and Installation
Installation of an engine knock sensor typically involves replacing an existing faulty unit. It is recommended that this procedure be performed by a qualified automotive technician. If you choose to perform the installation yourself, ensure you have the necessary tools and refer to your vehicle's specific service manual for detailed steps.
3.1 Pre-Installation Checks
- Verify that the new sensor's OEM number (89615-20090 or 89615-06010) matches the original part number for your vehicle.
- Compare the dimensions and model type of the new sensor with the old one to ensure compatibility.
- Inspect the sensor and its electrical plug for any visible damage before installation.

Figure 2: Engine Knock Sensor with its electrical connector. Handle the plug with care.
3.2 Installation Steps (General Guide)
- Ensure the vehicle is parked on a level surface, the engine is off and cool, and the parking brake is engaged.
- Disconnect the negative terminal of the vehicle's battery.
- Locate the existing knock sensor on your engine. Its location varies by vehicle model (often on the engine block or intake manifold).
- Carefully disconnect the electrical connector from the old sensor.
- Using the appropriate wrench or socket, remove the old knock sensor.
- Install the new HONGWIN knock sensor, ensuring it is tightened to the manufacturer's specified torque (refer to your vehicle's service manual).
- Reconnect the electrical plug to the new sensor, ensuring a secure connection.
- Reconnect the negative terminal of the vehicle's battery.
- Start the engine and check for any warning lights or abnormal operation.
4. Operating Instructions
The HONGWIN Engine Knock Sensor operates automatically as part of your vehicle's engine management system. Once correctly installed, it continuously monitors engine vibrations to detect pre-ignition or detonation (knocking). It requires no user interaction after installation.
- The sensor converts mechanical vibrations into electrical signals.
- These signals are sent to the Engine Control Unit (ECU).
- The ECU interprets these signals and adjusts engine parameters, such as ignition timing, to prevent knocking and optimize engine efficiency and longevity.
5. Maintenance
The HONGWIN Engine Knock Sensor is designed to be a maintenance-free component. Regular vehicle maintenance, as recommended by your vehicle manufacturer, will help ensure the overall health of your engine and its components, including the knock sensor.
- Periodically inspect visible wiring and connectors for any signs of wear, corrosion, or damage during routine engine checks.
- Ensure the engine bay is kept clean to prevent debris buildup around sensors.
6. Troubleshooting
A faulty knock sensor can lead to various engine performance issues. If you experience any of the following symptoms, it may indicate a problem with the knock sensor or another engine component. Professional diagnosis is recommended.
Common Symptoms of a Faulty Knock Sensor:
- Check Engine Light (CEL) Illumination: The most common indicator. Diagnostic Trouble Codes (DTCs) related to the knock sensor (e.g., P0325) may be stored.
- Reduced Engine Performance: The ECU may retard ignition timing excessively as a failsafe, leading to decreased horsepower and acceleration.
- Poor Fuel Economy: Inefficient combustion due to incorrect timing adjustments can lead to increased fuel consumption.
- Engine Knocking/Pinging: If the sensor fails to detect knocking, the ECU won't adjust timing, and actual engine knocking may occur, potentially causing engine damage.
If you suspect a problem with your knock sensor, it is best to have your vehicle inspected by a certified mechanic who can perform diagnostic tests.
7. Specifications
| Attribute | Specification |
|---|---|
| Brand | HONGWIN |
| Product Name | Knock Sensor |
| OEM NO. | 89615-20090, 89615-06010 |
| Sensor Type | Magnetic Induction |
| Type/Style | Magnetostrictive |
| Country of Origin | Mainland China |
| Manufacturer | Wenzhou Haowei Auto Parts Co., Ltd. |
| Restrictions | Note dimensions and model type; take care with the plug. |
Compatible Vehicle Models:
This sensor is compatible with a wide range of Toyota and Lexus vehicles. Please verify the OEM part number against your vehicle's original sensor before purchase and installation.
- Toyota: Corolla (2003-2012), FJ Cruiser (2007-2012), Highlander (2005-2012), Matrix (2003-2012), Sequoia (2005-2012), Sienna (2004-2012), Avalon (2005-2011), Camry (2002-2011), Land Cruiser (2008-2011), Prius (2005-2011), RAV4 (2006-2011), Tacoma (2005-2011), Venza (2009-2011), Yaris (2007-2011), 4Runner (2004-2009), Tundra (2005-2009), Solara (2004-2008).
- Lexus: GS430 (2005-2007), GX470 (2004-2007), IS350 (2007), ES330 (2005-2006), LS430 (2005-2006).
8. User Tips
- Always double-check the OEM part number against your vehicle's existing sensor to ensure perfect fitment and function.
- When disconnecting or reconnecting the electrical plug, apply gentle pressure to avoid bending pins or damaging the connector.
- If you are unsure about any step of the installation process, consult a professional mechanic.
9. Warranty and Support
9.1 Warranty
This HONGWIN Engine Knock Sensor comes with a ONE YEAR guarantee from the date of purchase.
9.2 Customer Support
For any inquiries, technical assistance, or warranty claims, please contact the manufacturer directly:
- Manufacturer: Wenzhou Haowei Auto Parts Co., Ltd.
- Customer Service Email: inf@hwautoparts.com
- Telephone: +86-18005775583
- Manufacturer Address: Floor 2, Building 8 (West), Hantian Hardware and Electrical City, Tangxia Town, Ruian City, Zhejiang Province, China