Dfiolk FLXDL1200

Contents

Dfiolk Outdoor LED Lawn Lamp Instruction Manual

Model: FLXDL1200

Brand: Dfiolk

1. Introduction

Thank you for purchasing the Dfiolk Outdoor LED Lawn Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

2. Safety Information

  • Warning: Please test the lamp before installation and install only if safety is guaranteed.
  • Always disconnect the power supply before installation, maintenance, or cleaning.
  • Ensure the lamp is connected to the correct voltage (85-265V AC). Do not use 380V voltage.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Do not use corrosive liquids or abrasive cleaners to clean the lamp.
  • Ensure all connections are secure and properly insulated to prevent electrical hazards.
  • This product is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction.

3. Package Contents

Please check the package contents upon receipt:

  • 1 x LED Lawn Lamp Fixture
  • 1 x Power Driver

4. Setup and Installation

4.1 Pre-Installation Check

Before permanent installation, please turn on the light to check whether it is working properly.

4.2 Tools Required

Basic tools such as a screwdriver, wire strippers, and a wrench may be required for installation.

4.3 Installation Steps

The Dfiolk LED Lawn Lamp is designed for self-contained installation, typically mounted on a solid surface.

  1. Prepare the Mounting Location: Choose a suitable outdoor location with a stable surface (e.g., concrete, paved area, or a secure base in the lawn).
  2. Mark Drilling Points: Place the lamp's aluminum base on the desired location and mark the positions for drilling mounting holes.
  3. Drill Holes: Drill appropriate holes for the mounting screws.
  4. Wiring:
    • Ensure the main power supply is OFF at the circuit breaker.
    • Connect the lamp fixture to the provided power driver.
    • Connect the power driver to your main AC power supply (85-265V). Typically, this involves connecting the Live (L), Neutral (N), and Ground (GND) wires from your supply to the corresponding terminals on the power driver. Ensure all connections are secure and insulated.
  5. Mount the Lamp: Secure the aluminum base of the lamp to the prepared surface using appropriate screws. The aluminum base is designed for stability.
  6. Test: Once securely mounted and wired, restore power and test the lamp's functionality.
Diagram showing the dimensions of the 30cm LED lawn lamp, with a 10cm base width and 5cm top width.

Figure 1: Dimensions of the 30cm lamp (10cm base, 5cm top, 30cm height).

Diagram showing the dimensions of 30cm, 60cm, and 80cm LED lawn lamps, all with a 10cm base width and 5cm top width.

Figure 2: Available lamp heights: 30cm, 60cm, and 80cm, all with a 10cm base and 5cm top.

Close-up view of the sturdy aluminum base of the LED lawn lamp.

Figure 3: Close-up of the solid aluminum base for secure mounting.

Video 1: Product showcase demonstrating the LED lawn lamp in various outdoor settings and light conditions, highlighting its aesthetic appeal and illumination.

5. Operating Instructions

The Dfiolk LED Lawn Lamp operates via an external power switch connected to its electrical circuit. Once installed and wired:

  • To Turn On: Activate the external switch connected to the lamp's power supply.
  • To Turn Off: Deactivate the external switch.

The lamp provides consistent illumination in either Cold White or Warm White, depending on the model purchased.

LED lawn lamp emitting cold white light in a dark environment.

Figure 4: Lamp emitting Cold White light.

LED lawn lamp emitting warm white light in a dark environment.

Figure 5: Lamp emitting Warm White light.

6. Maintenance

  • Cleaning: Always turn off the power before cleaning. Wipe the lamp body and acrylic shade with a soft, damp cloth. Do not use corrosive liquids, abrasive cleaners, or harsh chemicals, as these can damage the finish and acrylic.
  • Inspection: Periodically inspect the lamp for any signs of damage to the housing, wiring, or mounting. Ensure the lamp remains balanced and securely fastened.
  • Waterproof Rating: The lamp has an IP65 rating, providing protection against dust and water jets. However, avoid submerging the lamp in water.
LED lawn lamp being sprayed with water, demonstrating its IP65 waterproof rating.

Figure 6: The lamp is Waterproof IP65, suitable for outdoor conditions.

7. Troubleshooting

  • Lamp Does Not Turn On:
    • Check if the external power switch is in the 'ON' position.
    • Verify that the circuit breaker supplying power to the lamp is not tripped.
    • Inspect all wiring connections to ensure they are secure and correctly made.
    • Confirm that the power supply voltage is within the specified range (85-265V AC).
  • Lamp Flickers:
    • Check for loose wiring connections at the lamp, power driver, or power source.
    • Ensure the voltage supply is stable and within the operating range.
  • Light is Dim:
    • Verify that the input voltage is adequate.
    • Ensure the power driver is functioning correctly.

8. Specifications

FeatureSpecification
Product NameLED lawn light
Model NumberFLXDL1200
Brand NameDfiolk
Item TypeLawn Lamps
Light SourceLED bulbs
Luminous Flux249-2000 Lumens
Voltage85-265V AC
Power SourceAC
Protection LevelIP65
Is DimmableNo
Is Bulbs IncludedYes
Body MaterialAluminum
Shade MaterialHigh transmittance acrylic
Base TypeWedge
Installation MethodSelf-contained
StyleContemporary
UsageHoliday / Outdoor Lighting
CertificationRoHS, CE
Available Heights30CM, 60CM, 80CM
Base Width10CM
Top Width5CM
Close-up view of the aluminum lamp body.

Figure 7: Detail of the durable aluminum lamp body.

Close-up view of the high transmittance acrylic lamp shade.

Figure 8: Detail of the high transmittance acrylic lamp shade for optimal light diffusion.

9. User Tips

  • Voltage Compatibility: This lamp operates on 85-265V AC. It is not available in a 12V version.
  • Power Source: This lamp is powered by electricity, not by a solar panel.
  • Aesthetic Choice: Consider the height (30cm, 60cm, or 80cm) and light color (Cold White or Warm White) that best complements your outdoor landscape design.

10. Warranty and Support

10.1 Warranty

This Dfiolk LED Lawn Lamp comes with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase.

10.2 Manufacturer Information

Manufacturer: Shenzhen Qiheng Power Supply Co., Ltd
Address: uangdongsheng shenzhenshi baoan xiqujieweiyuanhuixinandiergongye12haolou
Tel: +86 15018027687

10.3 EU Authorized Representative

EU Responsible Person: Sophie Dupont
EU Responsible Address: bis rue Abel 75012 Paris, France
Tel: +34910602659
E-mail: SophieDupont@proconseilfr.cc

11. Disposal Information

This symbol on the product or its packaging indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service, or the shop where you purchased the product.

WEEE symbol

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.