Dahao A15-B104H

Contents

Dahao BECS-A15 Control Panel Operation Box User Manual

Model: A15-B104H

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of the Dahao BECS-A15 Control Panel Operation Box, model A15-B104H. This genuine Dahao part is designed for use with Dahao embroidery machine systems, serving as the primary interface for machine control and operation.

Front view of the Dahao BECS-A15 Control Panel
Figure 1: Front view of the Dahao BECS-A15 Control Panel, displaying its touchscreen interface.

Specifications

FeatureDetail
ModelA15-B104H
Part NameControl Panel / Operation Box
CompatibilityDahao A15 embroidery machine system (BECS-A15)
TypeSewing Machine Parts
UseEmbroidery
MaterialSTEEL
ConditionOriginal New
OriginMainland China
Package Dimensions (L x W x H)25 cm x 20 cm x 15 cm
Package Weight3.5 kg
Rear view of the Dahao BECS-A15 Control Panel showing model and serial number
Figure 2: Rear view of the control panel, displaying model A15-B104H and serial number.

Setup and Installation

Before installation, ensure your embroidery machine is powered off and disconnected from the main power supply. Handle the control panel with care to avoid damage.

  1. Unpacking: Carefully remove the control panel from its packaging. Inspect for any visible damage.
  2. Mounting: The control panel is designed to be mounted on your Dahao embroidery machine. Use the appropriate brackets and fasteners (not included unless specified by your machine's manual) to securely attach the operation box. Refer to your embroidery machine's specific manual for mounting instructions.
  3. Connecting Cables: Connect the necessary cables to the ports located on the rear of the control panel.
    • CN1: Connect the main communication cable (likely Ethernet or a proprietary data cable) from your embroidery machine to the CN1 port. This port also includes a USB interface.
    • CN2: Connect any additional USB devices, such as a USB flash drive for pattern transfer, to the CN2 port (Function Extension Interface).
    • CN3: Connect the +5V CAN bus cable to the CN3 port. This is crucial for power and communication within the machine's control system.
  4. Power On: Once all connections are secure, reconnect your embroidery machine to the power supply and power it on. The control panel should initialize.
Close-up of rear connection ports CN1, CN2, CN3 on the control panel
Figure 3: Detailed view of the rear connection ports: CN1 (Ethernet/USB), CN2 (USB Function Extension Interface), and CN3 (+5V CAN).
Dahao BECS-A15 Control Panel mounted on an embroidery machine
Figure 4: The control panel integrated into an embroidery machine setup.

Operating Instructions

The Dahao BECS-A15 Control Panel features a user-friendly touchscreen interface for managing your embroidery machine's functions. Specific operational steps will depend on the embroidery machine model and the software version running on the panel.

  1. Power On/Off: Use the main power switch on your embroidery machine to turn the system on or off. The control panel will power up or down with the machine.
  2. Navigation: Interact with the interface by touching the icons and menus displayed on the screen. The main screen typically shows current embroidery status, design preview, and quick access buttons.
  3. Design Loading: To load an embroidery design, typically you would navigate to a "Design" or "Pattern" menu, select the input source (e.g., USB drive connected to CN2), and choose your desired design file.
  4. Parameter Adjustment: Adjust embroidery parameters such as speed, stitch length, color changes, and frame movement using the on-screen controls.
  5. Start/Stop Operation: Use the dedicated start and stop buttons on the touchscreen to initiate or pause the embroidery process.
  6. Error Messages: If an error occurs, the panel will display an error code or message. Refer to your embroidery machine's main manual for specific error code interpretations and troubleshooting steps.
Close-up of the control panel screen showing an embroidery pattern and data
Figure 5: The control panel's display during an embroidery operation, showing pattern and real-time data.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your control panel.

  • Cleaning:
    • Gently wipe the touchscreen and exterior surfaces with a soft, lint-free cloth.
    • For stubborn marks, slightly dampen the cloth with a mild, non-abrasive cleaner. Avoid excessive moisture.
    • Do not use harsh chemicals, solvents, or abrasive materials, as these can damage the screen and casing.
  • Inspection:
    • Periodically check all cable connections (CN1, CN2, CN3) to ensure they are secure and free from damage.
    • Ensure the mounting is stable and the panel is not loose.
  • Software Updates: If available, regularly check for and apply software updates for the Dahao system to ensure optimal performance and access to new features. Consult your embroidery machine's manufacturer or Dahao support for update procedures.

Troubleshooting

This section addresses common issues you might encounter with the control panel.

ProblemPossible Cause / Solution
Panel does not power on.
  • Ensure the embroidery machine's main power is on.
  • Check the +5V CAN cable connection (CN3) for proper seating.
  • Verify power supply to the embroidery machine.
Touchscreen is unresponsive.
  • Clean the screen surface for any debris or residue.
  • Restart the embroidery machine.
  • If the issue persists, contact technical support.
Embroidery machine not responding to panel commands.
  • Check the main communication cable connection (CN1).
  • Ensure the control panel is compatible with your specific embroidery machine model and system (e.g., BECS-A15 system).
  • Restart both the control panel and the embroidery machine.
USB device (e.g., flash drive) not recognized.
  • Ensure the USB device is properly inserted into CN1 or CN2.
  • Try a different USB port or a different USB device.
  • Check the file format of the embroidery design; ensure it's compatible with the Dahao system.

User Tips

  • Compatibility Check: Always verify the compatibility of this control panel (A15-B104H) with your specific embroidery machine model and system (BECS-A15). Similar components might be used across different machine series, but direct compatibility is crucial.
  • Packaging Inspection: Upon receiving the product, carefully inspect the packaging and the control panel itself for any signs of damage during transit. The product is typically well-packaged and protected.
  • Consult Machine Manual: For detailed operational procedures and specific error code interpretations, always refer to the comprehensive user manual provided with your embroidery machine.

Frequently Asked Questions (FAQ)

Q: Is this control panel compatible with Feiyue 1-head embroidery machines that have a horizontal panel?
A: Compatibility with specific third-party machines like Feiyue, especially with different panel orientations, cannot be guaranteed without direct verification. This panel is designed for Dahao A15 embroidery machine systems. Please consult your machine's manufacturer or a qualified technician to confirm compatibility before purchase.
Q: Will this Dahao BECS-A15 control panel work with model 185-070D?
A: The Dahao BECS-A15 control panel (A15-B104H) is specifically designed for the Dahao A15 embroidery machine system. Compatibility with other specific models like "185-070D" would need to be verified against the technical specifications of that machine. It is recommended to confirm with the machine manufacturer or a Dahao specialist.

Warranty and Support

For any technical assistance, warranty inquiries, or support regarding the Dahao BECS-A15 Control Panel, please contact the seller or the manufacturer directly. Ensure you have your product model (A15-B104H) and any relevant serial numbers ready when seeking support.

Seller: Richard's store - Yiwu Prague Embroidery Machine Parts Co., Ltd.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.