LUXCEO P7RGB

Contents

LUXCEO P7RGB Waterproof Video Light Stick User Manual

Model: P7RGB | Brand: LUXCEO

Introduction

Thank you for choosing the LUXCEO P7RGB Waterproof Video Light Stick. This manual provides detailed instructions for the safe and effective use of your new device. Please read it carefully before operation and keep it for future reference.

The P7RGB is a versatile LED light stick designed for photography and video shooting, featuring IP68 waterproofing for underwater use, adjustable RGB colors, and a built-in power bank function.

Important Safety Warnings

  • Keep the batteries away from fires and high temperatures to prevent explosion.
  • Do not place the light in fire.
  • Do not modify, take apart, shake, beat, or strike the product.
  • Always check voltage requirements before using to avoid damage.
  • Children should use this product under the supervision of guardians. Do not look directly at the glowing surface to avoid eye injury.
  • Charge the light at least once every three months. Do not charge in water or a wet environment.
  • Unplug the power cord when not using the light to avoid injury and damage.
  • Do not use or store in a damp environment or submerge in water while charging.
  • If any liquid spills into the product, it gives off gas, has unusual flickering, the cable is damaged, or the shell is broken, immediately cut off the power supply and seek professional help.
  • Do not discard the lithium battery improperly; dispose of it according to local regulations.

Package Contents

Please check the package to ensure all items are present:

  • LED Photography Light Stick (P7RGB) x1
  • Remote Controller x1
  • USB Cable x1
  • Lanyard x2
  • User Manual x1
  • Qualified Certificate x1
Image of LUXCEO P7RGB package contents including light stick, remote, cables, and lanyards.
Figure 1: Package Contents

Product Overview

Familiarize yourself with the components of the P7RGB light stick:

Diagram showing the LUXCEO P7RGB light stick with labels for 1/4 Standard Nut, Waterproof switch, Micro USB interface, USB output interface, Anti-skid Lanyard, Power & Charging indicator, and dimensions.
Figure 2: Product Components and Dimensions
  • Power & Charging Indicator: Shows battery status and charging progress.
  • Luminous Surface: The main light-emitting area.
  • Lanyard Hole: For attaching the included lanyards.
  • Waterproof Switch (Noctilucent function): Main control button, glows in the dark.
  • Waterproof Case: Protects internal components; unscrew for charging.
  • USB Output Interface: For charging external devices (power bank function).
  • Micro USB Interface: For charging the light stick.
  • 1/4" Standard Nut: For mounting on tripods or light stands.

Setup

Charging the Light Stick

Before first use, fully charge the light stick.

  1. Unscrew the waterproof cap to access the Micro USB charging port.
  2. Connect the included USB cable to the Micro USB port on the light stick and to a 5V USB power adapter (not included).
  3. The power indicators will show charging status.
  4. A full charge takes approximately 7 hours with a 2A adapter, or 12 hours with a 1A adapter.
  5. Once fully charged, disconnect the cable and securely screw the waterproof cap back on.
Close-up image showing the Micro USB input and standard USB output ports on the light stick, with a phone connected to the USB output for charging.
Figure 3: Micro USB Input and USB Output for Power Bank Function

Power Indicator Status

During Charging:

Battery Capacity LED1 LED2 LED3 LED4
Full Charge ON ON ON ON
75% < C ON ON ON Flash
50% < C < 75% ON ON Flash OFF
25% < C < 50% ON Flash OFF OFF
C < 25% Flash OFF OFF OFF

When the product is working in low battery, the first indicator will flash.

During Operation:

Battery Capacity LED1 LED2 LED3 LED4
C ≥ 75% ON ON ON ON
50% < C < 75% ON ON ON OFF
25% < C < 50% ON ON OFF OFF
3% < C < 25% ON OFF OFF OFF
0% < C < 3% Flash OFF OFF OFF

Note: The battery indicators will turn off when the power bank function is discharging. When you press the button switch to adjust lighting modes, the battery indicators will automatically turn off after a few seconds.

Operating Instructions

Basic Operation (Using the Light Stick Switch)

  1. To Turn On: When the light is off, press the waterproof switch once. The light will remember the last brightness and color temperature settings.
  2. To Turn Off: When the light is on, press the waterproof switch once.
  3. To Change Lighting Modes: Double-press the waterproof switch to cycle through the following modes:
    • Cool White Light
    • Warm White Light
    • Red Light
    • Green Light
    • Blue Light
    • Red + Green Light
    • Red + Blue Light
    • Green + Blue Light
    • Colorful Light Changing (gradual transition)
    • RGB Light (fixed RGB colors)
    • Warning Light (red/blue flashing)
    • Flashing White Light
  4. To Adjust Brightness: Long press the waterproof switch continuously to adjust the brightness. Long press again to adjust brightness in the opposite direction (from dark to bright or bright to dark). Brightness will not change when it reaches maximum or minimum levels.

Remote Control Operation

The light stick can be operated using the included remote control. Note: The remote controller only works when the product is turned ON via the main switch. It will not turn on the light stick if it's completely off.

LUXCEO P7RGB light stick with remote control, showing various color options and feature icons.
Figure 4: Light Stick with Remote Control

Remote Controller Function Illustration:

  • ON/OFF Button: Turns the light on or off.
  • Brightness Plus (+)/Minus (-) Buttons: Adjusts brightness.
  • Light Color Changing Button: Cycles through different light colors.
  • Colorful Lights Change Gradually Button: Activates gradual color transition mode.
  • Flashing White Light Button: Activates flashing white light mode.
  • Warm White Button: Sets warm white light.
  • Red Light Button: Sets red light.
  • Red Green Light Button: Sets red and green light combination.
  • Red + Blue Light Button: Sets red and blue light combination.
  • Warming Light Button: Activates warming light mode.
  • RGB Light Button: Activates RGB fixed color mode.
  • Cool White Button: Sets cool white light.
  • Blue Light Button: Sets blue light.
  • Green Light Button: Sets green light.
  • Green Blue Light Button: Sets green and blue light combination.

Note on Remote Control Buttons:

  • The Light Color Changing button does not work in the Red and Blue Warming Light and Flashing White Light modes.
  • This button adjusts the speed of color changing when in the Colorful Lights Change Gradually and RGB Light modes.
  • This button adjusts brightness when in the Warm White, Cool White, Red Light, Blue Light, Red+Blue Light, Red+Green Light, Green+Blue Light modes.

Power Bank Function

The light stick can be used to charge other USB-powered devices:

  1. Unscrew the waterproof cap to access the USB output port.
  2. Connect your smart device (e.g., mobile phone, iPad) to the USB output interface using its charging cable.
  3. The light stick's intelligent identification chip will provide a maximum output of 5V/2.4A.
  4. After charging, disconnect your device and securely screw the waterproof cap back on.

Mounting and Fixing

The P7RGB offers multiple ways for mounting and fixing:

  • Lanyard: Use the two lanyard holes to hang the light stick anywhere needed.
  • Tripod/Light Stand: The 1/4" standard nut at the bottom allows for easy attachment to tripods or light stands (tripod/stand not included).
  • Magnetic Clip: (Not included) Can be used to attach the light stick to metal surfaces.
Image illustrating various fixing methods for the light stick: using the included lanyard for hanging, an optional magnetic clip for metal surfaces, and an optional tripod via the 1/4 inch screw mount.
Figure 5: Various Fixing Ways

Demonstration Video

Watch this video for a visual guide on the light stick's features and operation:

Video 1: LUXCEO P7RGB Product Features and Demonstration

Key Features

  • IP68 Waterproof: Fully submersible for underwater photography up to 2 meters.
  • Adjustable Brightness & Color Temperature: 1-100% brightness adjustment, 12-level cold/warm light, and adjustable color temperature (3000K/5750K). Maximum output brightness up to 1000 lumens.
  • RGB Color Changing: Offers a wide range of RGB colors and effects.
  • High CRI: Ra>95 for accurate color rendering.
  • Built-in High-Capacity Battery: 10400mAh Li-ion battery provides up to 4.5 hours of run time at the brightest level.
  • Power Bank Function: Can charge smart devices via its USB output (Max 5V/2.4A).
  • 4 Common Scene Lighting Simulations: Lightning mode, Color changing mode (gradual), Breathing light mode, and Police car mode (red and blue warning light).
  • Versatile Mounting: Features lanyard holes and a 1/4" standard nut for tripods.
Image showing the LUXCEO P7RGB light stick submerged in water, highlighting its IP68 waterproof rating.
Figure 6: IP68 Waterproofing for Underwater Use
Image demonstrating the adjustable brightness from 1% to 100% and color temperature options (3000K, 5750K), along with a spectrum of RGB colors.
Figure 7: Adjustable Brightness and Color Options
Image displaying four scenario simulations: RGB Color Cycling, RGB Color Gradient, Red Blue Warning Light, and Lightning Simulation.
Figure 8: Scenario Lighting Simulations
Collage of images showing the light stick being used in various applications: photography, video shooting, portrait lighting, and magazine-style shoots.
Figure 9: Wide Application Scenarios

Maintenance

  • To maintain battery health, charge the light stick at least once every three months, even if not in use.
  • Keep the product clean and dry. Avoid exposing it to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure the waterproof cap is securely fastened when using the light stick in or near water.
  • The LED light source is irreplaceable. If the LED light source reaches the end of its life, the entire lamp should be replaced.

Troubleshooting

If you encounter any of the following issues, immediately cut off the power supply and seek help from a qualified technician:

  • Any liquid, including rain or water, spills into the product, which can damage electronic components.
  • The product gives off gas or has an unusual flickering.
  • The charging cable is damaged, and bare wires are visible.
  • The shell of the light stick is broken.

Specifications

Attribute Value
Name RGB Waterproof Video Light
Model P7RGB
Input DC 5V/2A (Max)
Output DC 5V/2.4A
Power 8W (Max)
Brightness 1000lm
CRI Ra>95
Color Temperature (CCT) 3000K/5750K (others for RGB)
Battery Li-ion 3.7V/10400mAh/38.48Wh
Charging Time ~7 hours (with 2A adapter)
Operating Temperature 0~40℃
Storage Temperature -10~50℃
Size 400x36x36mm
Weight 391g
Voltage Range USB (5-20V DC)
Capable of camera mounting No (direct mounting, but has 1/4" nut for tripods)
Inbox adaptor No
Capable of automatically controlling flash duration No
High-concerned chemical None
Lighting Type Underwater Photography Lighting
Color Temperature Version RGB Version
Brightness Adjustment Range 5 - 100%
Package Yes
Origin Mainland China
Certification CE, RoHS

User Tips

No specific user tips were available from provided customer reviews or Q&A data.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or the official LUXCEO website. Keep your purchase receipt as proof of purchase for any warranty claims.

You can also refer to the official user manual PDF for additional guides and documents: View User Manual (PDF)


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.