1. Introduction
Thank you for purchasing the ORIA LED Mirror Alarm Clock. This device combines a digital alarm clock with a mirror surface, offering features such as dual alarms, adjustable brightness, temperature and humidity display, music rings, and voice control. It is designed for use in bedrooms, home offices, and other indoor environments. Please read this manual carefully to ensure proper use and maintenance of your new alarm clock.
2. Safety Information
- Do not disassemble the product yourself. Changing the wrong battery might cause an explosion hazard.
- Keep the device away from water and high humidity environments.
- Avoid exposing the device to extreme temperatures or direct sunlight.
- Use only the recommended input voltage (5V 1A or 5V 2A) for charging. Higher voltage is not recommended.
- Dispose of electronic products according to local laws and regulations. Take broken products to the nearest collecting point for disposal.
3. Package Contents
- ORIA LED Mirror Alarm Clock
- Type-C USB Charging Cable
- Instruction Manual (this document)
4. Product Overview
The alarm clock features a clear LED display on a mirror surface, showing time, temperature, and humidity. The back panel houses all control buttons and ports.
Controls and Indicators:
- SNOOZE/DIMMER Button: On top, for snooze and brightness adjustment.
- 12/24H Button: On back, for time format.
- °C/°F Button: On back, for temperature unit.
- TIME SET Button: On back, for setting time.
- UP (+) Button: On back, for increasing values.
- DOWN (-) Button: On back, for decreasing values.
- ALARM SET Button: On back, for setting alarms.
- ALARM 1 ON/OFF Switch: On back, for Alarm 1 activation.
- ALARM 2 ON/OFF Switch: On back, for Alarm 2 activation.
- ON/OFF Switch: On back, main power switch.
- RESET Button: On back, for factory reset.
- Type-C Charging Port: On back, for power input.
- USB Output Port: On back, for charging external devices.
5. Setup
5.1 Power On & Charging
- Switch the main ON/OFF button on the back of the clock to 'ON' to start the alarm clock.
- Connect the Type-C USB cable to the charging port on the back of the clock and to a 5V 1A or 5V 2A power adapter (not included).
- The low power icon will be displayed during charging. It will turn off once fully charged.
- It is recommended to charge the battery fully before first use.
6. Operating Instructions
6.1 Time Setting
- Press and hold the "TIME SET" button for 3 seconds. The "hour" icon will flicker.
- Use the "+" or "-" buttons to adjust the hour.
- Press the "TIME SET" button again. The "minute" icon will flicker.
- Use the "+" or "-" buttons to adjust the minute.
- Press the "TIME SET" button again. The "week" icon will flicker.
- Use the "+" or "-" buttons to adjust the day of the week.
- Press the "TIME SET" button again to exit time setting.
- Note: Pay attention to whether the AM/PM setting is correct before setting the time.
6.2 12/24 Hours Mode
- In normal time, press the "12/24H" button to switch between 12-hour and 24-hour system modes. In 12-hour mode, "AM" or "PM" will be displayed.
6.3 Alarm Settings (Dual Alarm)
- Press and hold the "ALARM SET" button for 3 seconds to enter Alarm 1 setting. The "hour" icon will flicker.
- Use the "+" or "-" buttons to adjust the hour. Pay attention to AM/PM setting.
- Press the "ALARM SET" button again. The "minute" icon will flicker.
- Use the "+" or "-" buttons to adjust the minute.
- Press the "ALARM SET" button again to enter the alarm days setting.
- Use the "+" or "-" buttons to select the alarm days (1-1, 1-5, 1-6, 1-7, 6-7).
- Press the "ALARM SET" button again to enter alarm ringtone select.
- Use the "+" or "-" buttons to select a ringtone for Alarm 1 (13 music rings available).
- Press the "ALARM SET" button again to exit Alarm 1 setting. The "
" icon will flicker when Alarm 1 is set. - Repeat steps 1-8 for Alarm 2 setting. The "
" icon will flicker when Alarm 2 is set.
Alarm Day Options:
- 1-1: 1 day alarm
- 1-5: Monday to Friday
- 1-6: Monday to Saturday
- 1-7: Monday to Sunday
- 6-7: Saturday to Sunday
6.4 Alarm Switch
- Use the ALARM 1 ON/OFF and ALARM 2 ON/OFF switches on the back panel to turn each alarm on or off.
- When an alarm is ON, the corresponding alarm icon (
) will flicker. When OFF, the icon will not display.
6.5 Snooze Setting
- When the alarm is ringing, press the SNOOZE/DIMMER button on the top to enter snooze mode. The alarm icon will flicker. The alarm will ring again after 5 minutes.
- To turn off the alarm completely, press any other button on the back of the clock.
6.6 Temperature Display Mode
- In normal time, press the "°C/°F" button to switch between Celsius and Fahrenheit display.
6.7 MAX/MIN Memory and Operation
- Hold the "MEMORY" button to select "MAX/MIN duration" (24/48 or 72 hours). "MAX/MIN" and "24 Hr" will flicker. Press "+" or "-" to select. Press "MEMORY" button to exit.
- Press the "MEMORY" button to display Max temperature/humidity (3 seconds will revert to normal display).
- Press "MEMORY" button again to display Min temperature/humidity (3 seconds will revert to normal display).
- Press "MEMORY" button again to display normal temperature/humidity.
- During MAX or MIN display, hold the "MEMORY" button to cancel the previous record and display "--".
6.8 DST Setting (Daylight Saving Time)
- To activate DST: Hold the "DST(°C/°F)" button for 3 seconds. The time will move back 1 hour, and the "DST" icon will be displayed.
- To turn off DST: Hold the "DST(°C/°F)" button for 3 seconds. The time will move forward 1 hour, and the "DST" icon will not display.
6.9 Music Mode
- Press the "TUNES" button to play music. The music will last for 1 minute.
Product demonstration video showcasing features like voice control, brightness adjustment, and music rings.
6.10 Volume Setting
- Press the "+" or "-" buttons to adjust the volume. Press any button on the back to end the setting.
6.11 Adjust Brightness
- Press the "SNOOZE/DIMMER" button on the top to adjust the display brightness (5 levels).
6.12 Sounds Control / Always-on Display Mode
- Press the "
" button to switch between sounds control mode and always-on display mode. - In sounds control mode, if the ambient noise reaches 70 decibels or if the clock is slightly knocked, the display will awaken and turn off after 6 seconds.
- Note: Sound control mode saves power when operating on battery. For an always-on display, keep the clock plugged into external power.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ORIA |
| Model Number | Mirror Surface Alarm Clock |
| Type | Alarm Clocks |
| Motivity Type | Digital |
| Screen Type | LED |
| Function | Acoustic Control Sensing |
| Shape | SQUARE |
| Form | Single Face |
| Style | Modern Style |
| Weight | 266g |
| Battery | Built-in 1200mA Lithium Battery |
| Input Voltage | 5V 1A or 5V 2A (Type-C) |
| Temperature Range | -10°C to +50°C (14°F to 122°F) |
| Humidity Range | 25% to 95% RH |
| Dimensions (approx.) | 240mm (Length) x 105mm (Height) |
8. Maintenance
8.1 Low Battery Warning
- If the low power icon is displayed, music cannot play, alarm ringtone is intermittent, or the display flickers abnormally, please charge the product using the Type-C cable.
- During charging, the low power icon will be displayed. It will turn off after full charge.
- The other USB charging port can be used for mobile devices while the clock is charging.
8.2 Reset
- If the system is down, displays abnormally, or buttons are unresponsive, press the 'reset' button on the back of the product to reset it.
9. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Display turns off after a short time (on battery) | The clock is in 'Sounds Control' mode to save power. To keep the display always on, plug the clock into external power using the Type-C cable. |
| System unresponsive / Abnormal display | Press the 'reset' button on the back of the product. Ensure the battery is charged. |
| Temperature/Humidity values are abnormal during charging | This is normal. Heat generated during charging can affect sensor readings. Values will return to normal once fully charged or charging stops. |
| Music cannot play / Intermittent alarm ringtone | The battery may be low. Charge the device fully. |
10. User Tips
- For a constant display, especially in a bedroom, keep the alarm clock plugged into a power source. This prevents the display from turning off to save battery.
- The clock is highly regarded by users for its functionality and design.
11. Warranty and Support
For any issues or questions not covered in this manual, please contact the seller or manufacturer's customer support. Please retain your proof of purchase for warranty claims.
A detailed user manual in PDF format is available for download. You can find it at: ORIA LED Mirror Alarm Clock User Manual (PDF).
12. Environmental Protection
Electronic products should be disposed of according to related laws and regulations. Please take the broken product to the nearest collecting point for disposal to protect the environment.
13. Warning
Please do not disassemble the product by yourself! Changing the wrong battery might cause an explosion hazard.