1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your WenQia 433MHz Wireless Remote Control Smart Switch. This high-power switch is designed for controlling various electrical appliances such as water pumps, factory motors, lighting, and other high-load devices.
Safety Information
- WARNING! Please power off before installation! Always ensure the main power supply is disconnected before performing any wiring or installation procedures to prevent electric shock.
- Do not operate the switch when it is charged. Ensure all connections are secure and correct before restoring power.
- Promptly change the remote control battery when its voltage is insufficient to ensure reliable operation.
- Avoid installing the device near large metal objects, strong electromagnetic interference fields, or in locations where the distance between the remote control and receiver is too short, as this can affect wireless performance.
- Avoid abnormal use of the product, as it can reduce performance, shorten lifespan, and potentially cause damage or safety hazards.
2. Setup
Package Contents
- 1 x WenQia Smart Switch Receiver (Model: 2201-30A)
- 1 x Wireless Remote Control Transmitter
Receiver Overview
Familiarize yourself with the components of the receiver:

Image Description: The receiver unit showing its dimensions (85mm height, 43mm width, 30mm depth). Key features are labeled: 1. Fixing Hole (for mounting), 2. Learning Button (for programming remote controls), and 3. Indicate (LED indicator). The input and output terminals are clearly visible.
Wiring Diagram and Installation
The Smart Switch is designed for AC 90-250V input and output. Follow the wiring diagram carefully. Ensure all connections are tight and insulated.

Image Description: A detailed wiring diagram illustrating how to connect the Smart Switch to various appliances. It shows multiple Smart Switches connected in parallel to control a Light, a Fan, a Water Pump, and a Coffee Maker. Each switch requires a Line (Live) and Neutral input, and provides a Line and Neutral output to the appliance. The diagram uses red for Line and blue for Neutral connections.
- Power Off: Disconnect the main power supply to the circuit you will be working on.
- Mount Receiver: Use the fixing holes on the receiver to securely mount it in a suitable location, away from moisture and excessive heat.
- Connect Input Power: Connect the AC Line (Live) wire to the 'L' terminal of 'AC Input' and the AC Neutral wire to the 'N' terminal of 'AC Input' on the receiver.
- Connect Appliance: Connect the Line (Live) wire of your appliance to the 'L' terminal of 'AC Output' and the Neutral wire of your appliance to the 'N' terminal of 'AC Output' on the receiver.
- Verify Connections: Double-check all wiring to ensure correct polarity and secure connections.
- Restore Power: Once all connections are verified, restore power to the circuit.
3. Operating Instructions
Remote Control Overview
The remote control features ON and OFF buttons, an antenna, and an indicator light.

Image Description: Three views of the remote control. Key features are labeled: Antenna (for signal transmission), Indicator Light (shows when a button is pressed), Silicone Button (ON/OFF controls), and Sliding Closure (likely for battery compartment access). The remote's dimensions are 97mm length, 40mm width, 16mm thickness.
Programming (Learning) Modes
The receiver supports various operating modes. You must program the remote control to the desired mode.

Image Description: A visual guide on programming the switch. It highlights the 'Learn button' on the receiver and shows a hand pressing the 'ON' and 'OFF' buttons on a remote key fob. The steps are: 1. Press learn button 3 times. 2. Press 'ON' once, then Press 'OFF' once.
- Latched Mode:
- Press the learning button on the receiver 3 times.
- The LED indicator will flash.
- Press the 'ON' button on your remote control once.
- Press the 'OFF' button on your remote control once.
- The LED indicator will stop flashing, indicating successful programming.
- Operation: Press 'ON' button → Appliance turns ON. Press 'OFF' button → Appliance turns OFF. - Delay Mode (5/10/15/20 seconds):
- 5-second Delay: Press the learning button 4 times, then press the 'ON' button on your remote.
- 10-second Delay: Press the learning button 5 times, then press the 'ON' button on your remote.
- 15-second Delay: Press the learning button 6 times, then press the 'ON' button on your remote.
- 20-second Delay: Press the learning button 7 times, then press the 'ON' button on your remote.
- Operation: Press and hold 'ON' button → Appliance turns ON. Release 'ON' button → Appliance turns OFF after the set delay time.
Reset Function
To clear all programmed remote controls from the receiver's memory:
- Press the learning button on the receiver 8 times.
- The LED indicator will flash several times and then turn off, indicating all data has been cleared.
- Note: After resetting, all remote controls must be reprogrammed. If you wish to change the remote mode for an existing remote, you must first reset the receiver.
Change Default Status (OFF to ON)
By default, when power is restored after an outage, the relay is OFF. To change this so the relay turns ON when power is restored:
- Press the learning button on the receiver 8 times.
- Then, press the 'ON' button on your remote control 1 time.
- The LED indicator will confirm the change.
4. Maintenance
- Battery Replacement: When the remote control's range decreases or it becomes unresponsive, replace the battery. The remote control uses either 2*CR2016 batteries or a 23A 12V battery, depending on the specific remote model provided. Refer to the remote control's casing for battery type and replacement instructions.
- Cleaning: Use a soft, dry cloth to clean the receiver and remote control. Do not use abrasive cleaners or solvents.
- Environmental Conditions: Ensure the receiver is kept in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
5. Troubleshooting
- Device Not Responding:
- Check if the receiver is properly powered.
- Ensure the remote control battery is not depleted.
- Verify that the remote control is correctly programmed to the receiver (try reprogramming).
- Check for strong interference from other wireless devices or large metal objects nearby. - Reduced Remote Range:
- Replace the remote control battery.
- Ensure there are no obstructions between the remote and the receiver.
- Avoid using the device in environments with significant electromagnetic interference. - Intermittent Operation:
- Check all wiring connections for looseness.
- Ensure the receiver is not overheating.
6. Specifications
| Feature | Specification |
|---|---|
| Working Voltage | AC 90V~250V |
| Quiescent Current | 5mA |
| Max Current | 30A |
| Max Load | 6600W |
| RF Frequency | 433MHz |
| Working Temperature | -30°C to +80°C |
| Receiving Sensitivity | 97dbm |
| Remote Control Battery | 2*CR2016 or 23A 12V (depending on remote model) |
| Remote Distance | Up to 1000 meters (open space) |
| Support Encoding | EV1527 Learning code / 2262 Fixed code |
| RF Operating Mode | ASK Superheterodyne Wireless Reception |
| Receiver Dimensions (L×W×H) | 85mm × 43mm × 30mm |
| Remote Dimensions (L×W×H) | 97mm × 40mm × 16mm |
| Certifications | CE, RoHS, WEEE, CCC |
7. User Tips
- This smart switch is highly versatile and can be used to control a wide array of devices, from garage doors and automated curtains to fans, lights, and various motors.
- Consider the