1. Introduction
The HIKVISION DS-KH9510-WTE1(B) is a KH9 series IP indoor station featuring a 10-inch touch screen and Android operating system. It is designed to provide fluent video and audio communication for your intercom system. The device supports third-party application installation and comes with the Hik-Connect app pre-installed for integrated management of Hikvision devices.
Key Features:
- 10.1-inch colorful touch screen with 1024x600 resolution.
- Built-in Android System.
- Supports Android APP installation.
- Support for three-party software integration.
- Built-in Hik-Connect APP for all-in-one management of Hikvision's devices.
2. Package Contents
Please check the package for the following items:
- DS-KH9510-WTE1(B) Indoor Monitor
- Mounting Plate
- Screws and Wall Plugs
- Wiring Cables
- Quick Start Guide / User Manual (PDF version available online)
3. Physical Interfaces
The indoor monitor features various ports and buttons for connectivity and operation:
| No. | Description | No. | Description |
|---|---|---|---|
| 1 | Screen | 7 | Debugging Port |
| 2 | Microphone | 8 | microUSB Interface |
| 3 | Unlock Button | 9 | Loudspeaker |
| 4 | Power Supply Interface | 10 | Reserved |
| 5 | Alarm Terminals | 11 | TAMPER |
| 6 | RS-485/Relay Interface | 12 | Network Interface |
4. Installation
The HIKVISION DS-KH9510-WTE1(B) is designed for surface mounting. Ensure you have the necessary tools and follow local electrical codes during installation.
Installation Steps:
- Prepare the Mounting Location: Choose a suitable wall location, ensuring it is within reach of power and network connections. The device dimensions are approximately 254mm (W) x 166mm (H) x 26.65mm (D).
- Attach the Mounting Plate: Use the provided screws and wall plugs to securely attach the mounting plate to the wall.
- Connect Wiring: Connect the power (PoE or 12V DC/1A adapter) and network cables to the appropriate interfaces on the back of the monitor. If integrating with other devices, connect alarm terminals, RS-485/relay interfaces as needed.
- Mount the Monitor: Carefully align the monitor with the mounting plate and secure it in place.
For detailed wiring diagrams and specific mounting instructions, please refer to the full PDF user manual.
5. Initial Setup
5.1 Powering On
The monitor supports IEEE802.3af standard Power over Ethernet (PoE) or a 12 VDC/1A power adapter. Connect the device to a compatible PoE switch/injector or a 12V DC power source. The device will power on automatically.
5.2 Network Connection
The monitor can connect to your network via:
- Wired Ethernet: Connect an RJ-45 Ethernet cable to the network interface on the back of the device. It supports 10/100 Mbps self-adaptive connection.
- Wi-Fi: The device supports 2.4 GHz Wi-Fi (IEEE802.11b/g/n). Navigate to the 'Settings' menu on the touch screen to configure Wi-Fi settings and connect to your wireless network.
5.3 Language Selection
Upon first boot or via the settings menu, you can select your preferred language. The device supports multiple languages including English, Arabic, French, Russian, Spanish, Italian, German, Polish, Turkish, Portuguese, Czech, Hungarian, Dutch, Romanian, Bulgarian, Ukrainian, Croatian, Serbian, Greek, Lithuanian, Estonian, Latvian, Norwegian, Danish, Slovenian, Slovak, Hebrew, Swedish, Finnish, Mongolian, Vietnamese, and Traditional Chinese.
5.4 Hik-Connect App Integration
The Hik-Connect app is pre-installed. Follow the on-screen prompts to log in or register your Hik-Connect account to manage your Hikvision devices, including the indoor monitor and connected outdoor stations or IP cameras.
6. Operating Instructions
6.1 Live View
From the main menu, tap 'Live View' to see real-time video from connected outdoor stations or IP cameras. You can switch between different cameras if multiple are configured.
6.2 Answering Calls and Unlocking
When an outdoor station initiates a call, the indoor monitor will ring and display the live video feed from the caller. You can:
- Tap the green phone icon to answer the call.
- Tap the red phone icon to reject the call.
- Tap the unlock icon to remotely open the door (requires proper wiring to an electronic lock). The monitor supports 1 relay for lock control (Max. 30 VDC 0.3 A) and 1 high/low level relay (3.3 V/0 V).
- During a call, you can switch between different camera views if available.
6.3 Motion Detection and Call Recording
The monitor supports recording video based on motion detection and during calls. These recordings are stored and can be accessed via the 'Album' or 'Event Record' sections on the main menu.
7. Maintenance
7.1 Cleaning
To clean the monitor, gently wipe the screen and body with a soft, dry, lint-free cloth. Do not use abrasive cleaners, waxes, or solvents. Avoid spraying liquids directly onto the screen or into any openings.
7.2 Environmental Conditions
Ensure the device operates within the specified environmental conditions:
- Working Temperature: -10°C to 50°C (14°F to 122°F)
- Working Humidity: 10% to 90% (non-condensing)
Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
8. Troubleshooting
- No Power: Check power connections. If using PoE, ensure the PoE switch/injector is functioning correctly. If using a 12V DC adapter, verify the adapter is connected and providing power.
- No Network Connection: Verify Ethernet cable connection or Wi-Fi settings. Ensure your router/switch is operational.
- Video Recording Not Working: The video recording function may require a firmware upgrade. Ensure the device firmware is updated to V2.2.86_build250325 or later.
- No Audio during Call: Check volume settings on the monitor. Ensure the microphone and loudspeaker are not obstructed.
- Door Unlock Not Functioning: Verify the wiring to the electronic lock and the relay connections. Ensure the lock itself is functional.
- Compatibility Issues: While the device supports third-party software integration, specific compatibility with other brands (e.g., Panacom front cameras) cannot be guaranteed without testing. Refer to Hikvision's official compatibility list or contact support for specific integrations.
9. Specifications
| System Parameters | |
|---|---|
| Operation System | Android 10.1 |
| ROM | 8 GB |
| RAM | 2 GB |
| Processor | Embedded high performance processor |
| Display Parameters | |
| Screen Size | 10.1-inch |
| Operation Method | Capacitive touch screen |
| Type | Colorful IPS |
| Resolution | 1024x600 |
| Audio Parameters | |
| Audio Input | 1 built-in omnidirectional microphone |
| Audio Compression Standard | G722.1, OPUS, AAC_LC, AAC_LD, G726, G711.U, G711.A |
| Audio Output | 1 built-in loudspeaker |
| Audio Compression Bitrate | 64 Kbps |
| Audio Quality | Noise suppression and echo cancellation |
| Volume Adjustment | Adjustable |
| Capacity | |
| Message Capacity | 200 captured pictures, 200 alarm records |
| Notice Capacity | 200 |
| Linked Indoor Extensions Capacity | 16 |
| Linked Network Camera Capacity | 16 |
| Linked Doorphone Capacity | 17 |
| Network Parameters | |
| Network Protocol | TCP/IP, SIP, RTSP |
| Wi-Fi | 2.4 GHz, IEEE802.11b, IEEE802.11g, IEEE802.11n |
| Device Interfaces | |
| Alarm Input | 8 |
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive |
| RS-485 | 1 RS-485 (Half duplex) |
| TF Card | Support TF card, up to 128 G |
| Alarm Output | 1 |
| General | |
| Lock Control | 1 relay, Max. 30 VDC 0.3 A, and 1 high/low level relay (3.3 V/0 V) |
| Installation | Surface mounting |
| Weight (Net) | 875 g |
| Weight (Gross) | 1060 g |
| Working Temperature | -10°C to 50°C (14°F to 122°F) |
| Working Humidity | 10% to 90% (non-condensing) |
| Dimensions (W x H x D) | 254 mm x 166 mm x 26.65 mm (10.0" x 6.54" x 1.05") |
| Power Supply | 12 VDC, 1 A, IEEE802.3af, standard PoE |
| Application Environment | Indoor |
| Power Consumption | ≤ 12 W |
| Certification | CE, FCC |
10. User Tips
- Firmware Updates: For full functionality, especially video recording, ensure your device's firmware is up to date. A specific update to V2.2.86_build250325 or later may be required for video recording features.
- Language Support: The screen supports English and a wide array of other languages, which can be selected in the settings.
- Compatibility: While the device is versatile, always verify compatibility with specific third-party cameras or systems if you plan to integrate them.
11. Warranty and Support
For detailed warranty information, technical support, and service inquiries, please refer to the official HIKVISION website or contact your authorized dealer. A comprehensive user manual in PDF format is available for download: