1. Product Information
This manual provides instructions for the installation and maintenance of the AUTOXBERT replacement wing mirror glass. This product is designed to be a direct fit for specific vehicle models and years, ensuring proper function and visibility.
- Product Name: Car Mirror Glass
- Model: Vehicle-Specific (as listed below)
- Batch/Serial Number: Vehicle-Specific (as listed below)
Compatibility:
- For Opel / Vauxhall Vivaro 2001-2014
- For Renault Trafic 2001-2014
- For Nissan Primastar 2001-2014
2. Safety & Warnings
SAFETY FIRST:
- DISCONNECT THE VEHICLE BATTERY: Before any work, disconnect the negative (-) terminal. This prevents electrical shorts, potential damage to vehicle control modules, and airbag system risks.
- Work in a Safe Area: Park on a level surface, engage the parking brake, and work in good lighting.
- Avoid Excessive Force: Do not use excessive force or pry from the top center when removing the old mirror, as the glass can break.
- Heated Function Testing: If your mirror has a heated function, do not run the heater for more than 10-15 minutes on a dry surface during testing to prevent damage.
3. Specifications
| Feature | Detail |
|---|---|
| Placement on Vehicle | Front Left / Right Side Upper |
| Heated Function | No (unless specified by vehicle's existing wiring) |
| Glass Type | Convex |
| Glass Colour | Silver / Clear |
| Material | ABS / Glass |
| Item Weight | 0.27kg |
| External Testing Certification | ISO 9001:2015 |
| OEM NO. | vivaro mirror glass |
4. Installation Instructions
Follow these steps carefully to replace your vehicle's wing mirror glass.
Step 1: Removing the Old Mirror Glass
- Adjust the mirror face to its maximum inward tilt (pointing towards the vehicle window). This provides the best access behind the glass.
- Gently insert your fingers or a plastic pry tool behind the lower outer edge of the mirror glass.
- Apply steady, firm pressure outwards and backwards (away from the housing). You should hear a series of clicks/pops as the plastic clips release.
- Work your way around the edge until the entire glass is free. DO NOT use excessive force or pry from the top center, as the glass can break.
- Once loose, carefully tilt the glass forward and locate the electrical connector on the back (if your vehicle has heated mirrors).
- Press the small locking tab on the connector and disconnect it.
Step 2: Preparing for New Glass
- Thoroughly clean the exposed mirror backing plate/motor assembly in the housing. Remove any old adhesive residue or debris.
- Inspect the new mirror glass. Remove any protective film.
Step 3: Installing the New Mirror Glass
- First, connect the electrical connector from the vehicle's wiring harness to the back of the new mirror glass. Ensure it clicks and locks into place.
- Carefully align the new glass with the motor/backing plate. It often helps to hook the top edge in first, then gently press the bottom and sides until all clips snap securely into place. Listen for soft clicks.
- Do not press on the center of the glass. Apply pressure evenly around the edges.
5. Operating Instructions & Final Checks
- Gently press around the perimeter of the newly installed mirror to ensure a secure fit.
- Reconnect the vehicle battery.
- Test the power mirror adjustment function (if equipped on your vehicle) to ensure it moves smoothly in all directions. The mirror glass itself does not contain an adjustment motor; it relies on the vehicle's existing mechanism.
- If your vehicle has a heated mirror function (and the replacement glass is compatible), test it by starting the engine and activating the rear window defroster button. The mirror heaters are typically on the same circuit. After a few minutes, carefully touch the mirror surface—it should feel warm. If your item type is without heated functions, please ignore this step.
6. Maintenance
To ensure longevity and clear visibility of your mirror glass:
- Clean the mirror surface regularly with a soft cloth and a non-abrasive glass cleaner.
- Avoid using harsh chemicals or abrasive materials that could scratch the glass or damage the backing.
- Periodically check the mirror's mounting for any looseness and ensure it remains securely attached.
7. Troubleshooting
Common Issues:
- Mirror not adjusting: Ensure the vehicle battery is reconnected and the mirror's electrical connector (if applicable) is securely attached. Test the vehicle's adjustment controls.
- Mirror not heating: Verify the electrical connector is properly attached. Ensure the vehicle's rear defroster is activated. If the issue persists, consult a professional as it may indicate a vehicle-side electrical problem.
- Mirror feels loose: Gently press around the perimeter of the mirror to ensure all clips are fully engaged. If it continues to feel loose, re-evaluate the installation steps.
Need Help?
If you have any questions about fitment or installation, please contact us before installation with your Vehicle Identification Number (VIN) or clear photos of your original mirror glass (front and back). We are happy to assist.
8. User Tips
- Verify Compatibility: Always double-check the product's compatibility with your specific vehicle model and year before purchasing to ensure a perfect fit.
- Careful Handling: The mirror glass is fragile. Handle with care during installation to avoid breakage.
- Packaging: The product is typically well-packaged to prevent damage during transit. Inspect the package upon arrival for any signs of damage.
9. Manufacturer & EU Representative Information
- Manufacturer: OEMASSIVE Auto Parts Co., Ltd, 02, floor10, kerda plaza, no2zhonghaoyi rd, shenzhen, china. Email: customer@oemassive.cn
- EU Authorized Representative: Lefeng Technology GmbH, 2.OG, Zi.203, Beeskower Straße 4, in 15234 Frankfurt (Oder), Germany. Email: lefeng.tech@outlook.com
Compliance Information
The quality management system complies with ISO 9001:2015.