Autoeye M12-2.8MM-2MP-P-IRF

Contents

User Manual: HD 2.0 Megapixel 2.8mm Pinhole Lens

Model: M12-2.8MM-2MP-P-IRF

1. Product Introduction

This series of M12 mount lenses is designed for CCTV security cameras, featuring high-definition resolution and stable performance. They are compatible with various image sensors (CCD/CMOS) and suitable for indoor or outdoor surveillance systems. This specific model is a 2.0 Megapixel 2.8mm Pinhole Lens with an IR Filter.

2. Specifications

The following table details the general and specific specifications for this lens model:

Feature Specification
Brand Name Autoeye
Model Number M12-2.8MM-2MP-P-IRF
Mount Type M12 (S-Mount)
Resolution 2.0 Megapixel
Lens Type Pinhole, Manual
Focal Length Fixed 2.8mm
Aperture F2.0, Fixed Iris
Image Format 1/3"
IR Filter Built-in
Horizontal Field 88° (for 1/3" format)
Back Focal Length 3.3mm ±5%
Flange Back Length 2.8mm ±5%
Minimum Object Distance 30cm
Dimension Φ12 X 8mm
Technical diagram of the M12 Pinhole Lens with dimensions
Figure 1: Technical diagram showing the dimensions and image plane of the M12 Pinhole Lens. Key dimensions include M12*P0.5 thread, ⌀2.8 diameter, and various lengths (10.8, 8.0, 3.5, 2.8, 3.3 mm).

3. Installation Steps

Follow these steps to properly install the M12 Pinhole Lens onto your CCTV security camera:

  1. Power Off: Ensure the camera is completely powered off before beginning any installation or removal procedures.
  2. Remove Old Lens (if applicable): Gently unscrew any existing lens counter-clockwise from the camera module.
  3. Clean the Sensor: Use a professional air blower or a lint-free cloth to carefully remove any dust or debris from the camera's image sensor. Avoid touching the sensor directly.
  4. Install New Lens: Carefully align the M12 lens thread with the camera mount. Gently screw it in clockwise until it is snug. Do not overtighten.
Front view of the M12-2MP-2.8MM Pinhole Lens with IR Filter
Figure 2: Front view of the M12-2MP-2.8MM Pinhole Lens, highlighting its compact design and integrated IR filter.

4. Operating Instructions

This lens features a fixed iris and focal length, simplifying operation. The primary operational step involves focus adjustment:

  1. Power On: After installation, power on the camera and access its live video feed.
  2. Focus Adjustment: Slowly rotate the lens clockwise or counter-clockwise while observing the live feed until the image appears sharp and clear.
  3. Secure Focus (if applicable): If your lens or camera mount includes a locking screw, tighten it gently to secure the lens in the desired focus position.
Side view of the M12 Pinhole Lens, showing the threaded mount
Figure 3: Side view of the M12 Pinhole Lens, illustrating the M12 threaded mount for camera attachment.

5. Maintenance & Safety

Proper care and maintenance will ensure the longevity and optimal performance of your lens:

  • Cleaning: Use only a soft, microfiber cloth or professional lens cleaning tissue to wipe the glass surface. Avoid using harsh chemicals, abrasive materials, or excessive force, as these can damage the lens coating.
  • Storage: When not in use, store the lens in a dry, cool environment. Always use a lens cap to protect the glass surface from scratches and prevent dust accumulation.
  • Handling: Avoid touching the glass surface of the lens with your fingers. Fingerprints can leave oil marks that degrade image quality and are difficult to remove.

6. Troubleshooting

If you encounter issues with your lens, refer to the following common problems and solutions:

  • Blurry Image:
    • Ensure the lens is screwed in properly and fully seated on the camera mount.
    • Rotate the lens slowly to find the correct focus point.
    • Check the lens surface for fingerprints, dust, or smudges and clean it as described in the Maintenance section.
    • Verify that the camera's sensor is clean.
  • Dark Corners (Vignetting):
    • This issue occurs when the lens's image circle is smaller than the camera's image sensor. Ensure the lens format size (1/3" for this model) is compatible with your camera's sensor size.

7. User Tips

  • Compatibility Check: Always verify that your camera's mount type (M12) and sensor size (e.g., 1/3") are compatible with this lens to ensure optimal performance and avoid vignetting.
  • Gentle Handling: Due to the precision optics, handle the lens with care. Avoid dropping it or subjecting it to strong impacts.
  • Environmental Considerations: While suitable for indoor/outdoor surveillance, extreme temperatures or humidity can affect lens performance. Store and operate within recommended environmental conditions for your camera system.

8. Warranty and Support

For warranty information or technical support, please refer to the documentation provided with your camera system or contact the manufacturer directly. A detailed user manual in PDF format is also available for download: User Manual (PDF).

© 2024 Autoeye. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.