MatSee Plus PC321-W-TY

Contents

Smart Life 3 Phase WiFi Bidirectional Energy Meter User Manual

Model: PC321-W-TY

1. Welcome

The MatSee Plus PC321-W-TY Power Clamp is designed to monitor electricity usage in your facility by connecting current transformer (CT) clamps onto the power cables. This device provides real-time measurements of Voltage, Current, Power Factor, and Active Power. It supports both energy consumption (import) and energy production (export) measurements, making it ideal for solar PV systems and other applications requiring bidirectional energy monitoring.

This guide will walk you through the product's features, initial setup, installation, and operation.

Key Features:

  • Tuya compliant, supporting Tap-to-Run and automation with other Tuya devices.
  • Compatible with Single and 3-phase electricity systems.
  • Utilizes three current transformers for single-phase applications.
  • Measures real-time Voltage, Current, Power Factor, and Active Power.
  • Bi-Directional measurement for both energy consumption and production.
  • Suitable for both residential and commercial applications.
  • Lightweight and easy to install.

2. Safety Handling

WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Power Clamp and other property. Read all the safety notices below before using the Power Clamp.

  • The power clamp must be installed and serviced only by a qualified electrical personnel.
  • Do not touch the terminals of the device during testing.
  • Turn off all the power supply for this equipment before installing.
  • Make sure that the power supply is off before connecting or disconnecting it to an auxiliary device.
  • Always use a properly rated voltage sensing device to confirm power is off.
  • Replace all devices, doors and covers before applying power to the equipment.
  • Avoid high humidity or extreme temperatures.
  • Avoid long exposure to direct sunlight or strong ultraviolet light.
  • Do not drop or expose the unit to intense vibration.
  • Do not disassemble or try to repair the unit on your own.
  • Do not expose the unit or its accessories to flammable liquids, gases or other explosives.

Failure to follow these instructions will result in death or serious injury.

3. Product Overview

Familiarize yourself with the components of your PC321-W-TY Power Clamp.

MatSee Plus PC321-W-TY Energy Meter with CT clamps and antenna
Main unit, three Current Transformer (CT) clamps, and external antenna.

Components:

  • Main Unit (PC321-W-TY): The central processing unit for energy monitoring.
  • LED Indicator: Provides status feedback (see Troubleshooting section for details).
  • Reset Button: Used for resetting the device (see Troubleshooting section for details).
  • AC Input Cable: Connects the main unit to power.
  • Current Transformers (CTs): Three clamps that measure current flow.
  • External Antenna: Enhances Wi-Fi signal reception.
  • Antenna Connector: Port for connecting the external antenna.
Back of the PC321-W-TY main unit showing reset button and model information
Back of the main unit with Reset Button, Model: PC321-W-TY, Input: 100-240V 50/60Hz, and Serial Number.
Close-up of an XH-SCT-T24 300A 3000:1 CT clamp
Close-up of a Current Transformer (CT) clamp.
External antenna for the energy meter
External Antenna for improved signal.

4. Technical Specifications

CategorySpecification
Brand NameMatSee Plus
ModelPC321-W-TY
Wireless CommunicationWiFi (2.4GHz only, not 5Ghz)
Communication MethodWi-fi
Wireless FrequencySupport 2.4GHz only, not 5Ghz
BluetoothBluetooth 4.2 Low Energy
Output PowerUp to +20dBm
Power SourceAC
Operating Voltage100-240V AC 50/60 Hz
Calibrated Metering Accuracy≤ 100W (Within ±2W), >100W (Within ±2%)
Operating Temperature-20 ℃ - +55 ℃
Operating Humidity90% non-condensing
Dimension86(L) x 86(W) x 37(H) mm
Report Cycle2 seconds
App NameTuya Smart, Smart Life
Monitor PowerReal-Time monitor and Record Daily Weekly Monthly Usage
Battery IncludedNo
Inbox AdaptorNo
CertificationCE, RoHS

CT Clamp Diameter:

  • 80A: 10mm
  • 120A: 16mm
  • 200A: 20mm
  • 300A: 24mm

5. Setup and Installation

Please make sure the main power in your facility is OFF before installing!

5.1 Mounting the Device

  1. Use the mounting bracket as a template to mark the two holes on the wall for installing screws.
  2. Screw the mounting bracket onto the wall according to the marked location. Install wall plugs if necessary.
  3. Locate the hooks of the mounting bracket and line up the hooks with the mounting holes on the Power Clamp. Fit the hooks into the mounting holes as shown in the diagram below. Installation is now completed.
Diagram showing how to mount the energy meter to its bracket
Mounting the main unit to its bracket.
Dimensions of the mounting bracket: 65mm width, 49mm height, 49mm screw spacing
Mounting bracket dimensions.

5.2 Connecting the External Antenna

  1. Place the External Antenna outside the electrical panel to ensure that the device's signal is not blocked by metal. The base of the antenna is magnetic and can be adsorbed on iron materials.
  2. Screw the External Antenna assembly cable to the Antenna connector on the main unit.

5.3 Connecting Current Transformer (CT) Clamps

  1. Attach both ends of the Current Transformer Cables to the main unit. Then, spin the waterproof latch clockwise until both ends have been tightened and secured.
  2. Open the CT clamp to see the arrow (P1→P2 or K→L) or find it on the sticker on the outside of the clamp. This arrow indicates the direction of the CT. The CT supports bi-directional sensing.
Open CT clamp showing the arrow for direction
Open CT clamp showing direction arrow.

CT Direction for Energy Consumption (Import):

To measure energy consumption, the arrow on the CT should follow the direction of the current flows. In this case, the power will be positive, and the energy consumption will be accumulated.

3 Phase electricity wiring diagram for energy consumption
3 Phase electricity wiring diagram for consumption.
Single Phase with PV system wiring diagram for energy consumption
Single Phase with PV system wiring diagram for consumption.

CT Direction for Energy Production (Export):

To measure energy production, the arrow on the CT should be opposite to the direction of the current flows. In this case, the power will be negative, and the energy generation will be accumulated.

3 Phase with PV system wiring diagram for energy production
3 Phase with PV system wiring diagram for production.
Diagram showing correct CT clamp direction: all three CTs must have arrows pointing in the same direction
Ensure all 3 CTs have arrows pointing in the same direction.

5.4 Powering the Device

  1. Connect the AC Input cable to a socket near the Electrical Box to power on the Power Clamp according to the corresponding wiring diagram.
  2. Apply the CT on the electric cable and ensure the direction of the CT is correct.

Note:

  • The circuit measured by each CT must be in the same phase as the power supply of that CT. For example, if the power supply is L1, the CT must measure the L1 circuit.
  • The meter requires the measured device to have a neutral wire. Otherwise, it cannot measure the device's voltage, current, and power.

6. App Configuration

6.1 Download the Smart Life App

Download the Smart Life application from your device's App Store (iOS) or App Market (Android). You can also scan the QR code below to download and install.

QR code for Smart Life App download
Scan to download Smart Life App.

6.2 Pairing Method 1: Scan QR Code

  1. Open the Smart Life app and click the 'Scan' button in the upper right corner of the App Home page.
  2. Scan the QR code provided in the Quick Start Guide (or on the device itself if available) to configure the network.
Screenshot of Smart Life app home screen with 'Scan' button highlighted
Smart Life App: Click 'Scan' to add device.

6.3 Pairing Method 2: Manual/Bluetooth Pairing

  1. Power on the power clamp.
  2. Make sure the LED indicator is flashing green. If it's not, please reset the device (see Troubleshooting).
  3. Open the Smart Life app and turn on Bluetooth on your phone.
  4. The app should automatically detect and display nearby devices. If a prompt box pops up automatically, click 'Add'.
  5. If no prompt box appears, click the '+' icon on the top right of the home page to manually search for nearby devices.
  6. After clicking 'Add', enter your home Wi-Fi network name (SSID) and password. The device only supports 2.4GHz Wi-Fi networks, not 5GHz. Wait for the device to be added.
Screenshot of Smart Life app showing device being added successfully
Smart Life App: Device added successfully.

7. Operating the Device

Once successfully connected to the Smart Life app, you can monitor and manage your energy usage.

7.1 Real-Time Monitoring

The app provides real-time data for total current, power, and kWh. For 80A-300A CT models, it also displays individual phase (A, B, C) voltage, current, power, and kWh consumption.

App screenshot showing real-time energy consumed and produced data for each phase
Real-time monitoring of energy consumed and produced per phase.
App screenshot showing total energy consumed and produced, and individual phase energy produced
App overview of total and phase-specific energy production.

7.2 Electricity Statistics

The app records hourly, daily, monthly, and yearly power consumption (kWh) values for both total usage and each phase separately.

App screenshot showing hourly, daily, and monthly electricity statistics
Electricity statistics: hourly, daily, and monthly views.
App screenshot showing hourly, daily, and monthly electricity statistics for Phase A
Electricity statistics for Phase A: hourly, daily, and monthly views.

7.3 Export Data

You can export your power consumption data directly from the app.

App screenshot showing the data export function, allowing users to select items and enter an email address
App's data export feature.

7.4 Create Scenes and Automation

The Smart Life app allows you to create custom scenes and automations based on the energy meter's readings. For example, you can set a condition where if the power generation reaches a certain wattage (e.g., 3000W), a connected Tuya switch for an appliance (like a water heater) is automatically turned on.

App screenshot showing how to create a scene based on device status changes, such as active power reaching a value
Creating a scene based on device status changes.
App screenshot showing options for actions in a scene, including controlling a single device or sending notifications
Scene creation: defining actions like controlling devices or sending notifications.

7.5 Product Demonstration Video

Watch this video for a visual demonstration of the product setup and app interface:

Video demonstrating the Smart Life app interface and real-time energy monitoring with the PC321-W-TY meter.

8. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Regularly check all cable connections to ensure they are secure.
  • Avoid exposing the device to moisture or extreme temperatures.
  • Ensure the external antenna is positioned optimally for strong Wi-Fi signal.

9. Troubleshooting

9.1 Reset Button Functionality

Press and hold the reset button for 5 seconds until the LED indicator flashes red 3 times quickly. This will restore the power clamp to default factory settings. Note that energy data will NOT be cleared during this process. The device will then enter pairing mode for 3 minutes.

If you wish to clear the energy data, you must delete the device from the app, wipe the data within the app, and then add it again.

9.2 LED Indicator Status

LED StatusMeaning
Green LED blinkingWaiting for pairing
Green LED solid onDevice has connected to cloud
Red LED solid onDevice is connected to the router, but failed to connect to the cloud
Red LED blinkingWi-Fi has been configured, but failed to connect to the router

9.3 Wi-Fi Configuration Failed

  • Router Password: Confirm that the entered router password is correct.
  • iOS Local Network: If you have upgraded to iOS 14 or later, you need to enable "Local Network" access for the Smart Life App in your phone's settings. Also, ensure location permissions are enabled for both the phone system and the Smart Life App.
  • Wi-Fi Frequency: The device only supports 2.4GHz Wi-Fi. If your router supports both 2.4GHz and 5GHz, ensure the 2.4GHz channel is enabled and you are connecting the device to it. Refer to your router's settings for configuration.
  • DHCP Service: Ensure the DHCP service is enabled for your router. If not, the IP address might be occupied.
  • If issues persist, try changing your router settings or removing and re-adding the device in the app.

9.4 Device Offline

  • Power Check: Confirm that the Power Clamp is powered on.
  • Network Status: Verify that your home Wi-Fi network is functioning normally and that the Wi-Fi name (SSID) and password have not been changed.
  • Proximity Test: Place your phone near the device and ensure both are in the same network environment. Try opening a website on your phone to confirm internet connectivity.
  • If problems continue, it is recommended to remove the device from the app or change the router to add it again.

10. User Tips

  • Bidirectional Monitoring: This device is capable of measuring current in both directions, making it suitable for monitoring both energy consumption (import) and production (export), especially useful for solar panel setups.
  • Home Assistant Compatibility: Please note that this device is not compatible with Home Assistant.
  • Neutral Wire Requirement: The meter requires a neutral wire for accurate measurement of voltage, current, and power. Ensure your setup includes a neutral wire.
  • Data Export: Leverage the app's data export feature to analyze your energy usage patterns over time (hourly, daily, monthly, yearly).
  • Smart Automation: Utilize the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.