WenQia 2202+KT182A

Contents

WenQia 433MHz Universal Wireless Remote Control System User Manual

Model: 2202+KT182A

1. Introduction

Thank you for choosing the WenQia 433MHz Universal Wireless Remote Control System. This system provides a reliable and convenient solution for wirelessly controlling various electrical devices such as garage doors, gates, lights, motors, and automated curtains. This manual will guide you through the installation, programming, and operation of your new remote control system.

2. Safety Precautions

  • Always ensure the power supply is disconnected before performing any wiring or installation.
  • Connect wires correctly according to the provided wiring diagrams to prevent damage to the device or electrical hazards.
  • Ensure all power wires are tightened securely.
  • Do not touch metal parts of the circuit board when the receiver is powered on to avoid electric shock.
  • Install the receiver in a stable, dry place, away from strong magnetic fields or high temperatures.
  • This device is designed for indoor use or in protected outdoor enclosures.

3. Package Contents

Please check the package to ensure all items are present:

  • 1 x 2-Channel RF Relay Receiver (Model 2202)
  • 1 x Wireless Remote Control Transmitter (Model KT182A, with 23A 12V battery included)
  • 1 x Receiver Case (optional, may be pre-assembled)
WenQia 433MHz Remote Control System Components

Image 1: WenQia 433MHz Remote Control System Components (Receiver board, protective case, and remote control transmitter)

4. Specifications

FeatureSpecification
Brand NameWenQia
Model Number2202+KT182A
Wireless CommunicationRF (Radio Frequency)
RF Frequency433MHz
Channels2
Working Voltage (Receiver)AC 85V~250V
Input/Output Voltage (Relay)1V-250V
Max Current10A
Max Load2200W
Quiescent Current5mA
Receiving Sensitivity-97dbm
Receiving RangeMore than 1000 meters (open space)
Support Encoding1527 Learning code / 2262 fixed code
RF Operating ModeASK Superheterodyne Wireless Reception
Remote Operating ModesMomentary / Toggle / Latched / Delay Mode
Amount of Storage RemotesUp to 25 pieces
Working Temperature-30°C ~ +80°C
Receiver Dimensions70mm x 50mm x 17mm (approx. 2.8in x 2.0in x 0.6in)
Receiver Weight59g
Remote Dimensions97mm x 40mm x 16mm
Remote Weight34g
Remote Battery23A 12V (included)

5. Components Overview

5.1. Receiver Board (Model 2202)

Receiver Board Components

Image 2: Receiver Board Components

  • Antenna: For receiving RF signals from the transmitter.
  • Indicator Light: Shows status during programming and operation.
  • Learning Button: Used to pair remotes and set operating modes.
  • NO (Normally Open) Pins: Output contacts that close when the relay is activated.
  • COM (Common) Pins: Common output contacts for the relay.
  • NC (Normally Closed) Pins: Output contacts that open when the relay is activated.
  • IN (Input) Terminals (N, L): For connecting AC 85V~250V power to the receiver.

5.2. Remote Control Transmitter (Model KT182A)

Remote Control Transmitter Components

Image 3: Remote Control Transmitter Components

  • Antenna: For transmitting RF signals.
  • Indicator Light: Illuminates when a button is pressed, indicating signal transmission.
  • Silicone Buttons (A, B): Used to send control commands.
  • Sliding Closure: Protects buttons from accidental presses.

6. Wiring Diagrams

IMPORTANT: Ensure power is OFF before wiring. Incorrect wiring can damage the device or cause electrical hazards.

Wiring Instructions for Various Devices

Image 4: Wiring Instructions for AC Device, AC Motor, DC Device, and DC Motor

6.1. Wiring for AC Device (e.g., Light)

  • Connect the AC 85V~250V power supply to the receiver's 'N' and 'L' input terminals.
  • Connect one wire from your AC device (e.g., light bulb) to the 'COM' terminal of the desired relay channel.
  • Connect the other wire from your AC device to the 'NO' (Normally Open) terminal of the same relay channel.
  • Connect the remaining power line (e.g., Neutral) to the other side of your AC device.

6.2. Wiring for AC Motor (e.g., for forward/reverse control)

  • Connect the AC 85V~250V power supply to the receiver's 'N' and 'L' input terminals.
  • For each relay channel, connect one motor wire to 'COM' and the other to 'NO' or 'NC' depending on desired motor direction.
  • Ensure proper isolation and wiring for motor direction control using both relays.

6.3. Wiring for DC Device (e.g., DC Light)

  • Connect the AC 85V~250V power supply to the receiver's 'N' and 'L' input terminals.
  • Connect the positive (+) terminal of your DC power source to the 'COM' terminal of the desired relay channel.
  • Connect the positive (+) terminal of your DC device to the 'NO' terminal of the same relay channel.
  • Connect the negative (-) terminal of your DC power source directly to the negative (-) terminal of your DC device.

6.4. Wiring for DC Motor

  • Connect the AC 85V~250V power supply to the receiver's 'N' and 'L' input terminals.
  • Connect the positive (+) terminal of your DC power source to the 'COM' terminal of the desired relay channel.
  • Connect one motor wire to the 'NO' terminal of the same relay channel.
  • Connect the negative (-) terminal of your DC power source directly to the other motor wire.

7. Setup and Programming

The remote control kit is typically pre-programmed from the factory. If you need to pair new remotes or change operating modes, follow the instructions below. The receiver can store up to 25 remote controls.

Video 1: Demonstration of pairing and resetting the remote control system.

7.1. Setting Operating Modes (Pairing Remote)

To pair a remote and set its operating mode, you will use the learning button on the receiver board. The indicator light will guide you through the process.

7.1.1. Momentary Mode (Jog Mode)

Function: Press and hold the remote button, the relay turns ON; release the button, the relay turns OFF.

  1. Press the learning button on the receiver 1 time. The indicator light will turn off.
  2. Press button 'A' on your remote control. The indicator light on the receiver will flash several times and then turn off.
  3. The remote is now paired in Momentary Mode.

7.1.2. Toggle Mode (Self-Locking Mode)

Function: Press the remote button once, the relay turns ON; press the same button again, the relay turns OFF.

  1. Press the learning button on the receiver 2 times. The indicator light will turn off.
  2. Press button 'A' on your remote control. The indicator light on the receiver will flash several times and then turn off.
  3. The remote is now paired in Toggle Mode.

7.1.3. Latched Mode (Interlock Mode)

Function: Press button 'A' on the remote, relay 1 turns ON and relay 2 turns OFF; press button 'B' on the remote, relay 2 turns ON and relay 1 turns OFF. (Requires a remote with at least two buttons).

  1. Press the learning button on the receiver 3 times. The indicator light will turn off.
  2. Press button 'A' on your remote control.
  3. Then, press button 'B' on your remote control. The indicator light on the receiver will flash several times and then turn off.
  4. The remote is now paired in Latched Mode.

7.1.4. Delay Mode

Function: Press the remote button, the relay turns ON; after a set delay time (5s, 10s, or 15s), the relay automatically turns OFF.

  1. For 5-second delay: Press the learning button on the receiver 4 times.
  2. For 10-second delay: Press the learning button on the receiver 5 times.
  3. For 15-second delay: Press the learning button on the receiver 6 times.
  4. After pressing the learning button the specified number of times, the indicator light will turn off.
  5. Press button 'A' on your remote control. The indicator light on the receiver will flash several times and then turn off.
  6. The remote is now paired in Delay Mode with the selected time.

7.2. Resetting (Clearing All Learned Remotes)

To clear all previously paired remote controls from the receiver's memory:

  1. Press the learning button on the receiver 8 times.
  2. The indicator light will flash several times and then turn off.
  3. All previously paired remotes are now cleared from the receiver's memory. You will need to re-pair any remotes you wish to use.

8. Operating Modes Explained

  • Momentary Mode: Ideal for applications where you need temporary activation, like a doorbell or a momentary gate opening.
  • Toggle Mode: Suitable for on/off control of lights, fans, or other devices where a single button press toggles the state.
  • Latched Mode: Perfect for controlling two mutually exclusive states, such as motor forward/reverse, or opening/closing a gate with separate buttons.
  • Delay Mode: Useful for applications requiring automatic shutdown after a set period, like a timed light or a temporary power supply.

9. Application Scenarios

This versatile remote control system can be used in various settings:

Application Scenarios

Image 5: Examples of product applications

  • Home Automation: Control lights, fans, automated curtains, garage doors, and electric locks.
  • Industrial Control: Operate equipment, motors, water pumps, and other machinery in factories or farms.
  • Vehicle Modification: Control various functions in modified vehicles.
  • Security Systems: Integrate with gate openers or access control systems.

10. Troubleshooting

ProblemPossible Cause / Solution
Remote control not working
  • Check if the remote control battery (23A 12V) is dead or low. Replace if necessary.
  • Ensure the remote control is paired correctly to the receiver in the desired mode. Try re-pairing.
  • Verify the receiver is powered on and its indicator light is functioning.
Receiver not responding
  • Check the power connection to the receiver (AC 85V~250V).
  • Ensure all wiring to the controlled device is correct and secure.
  • Verify the remote control is within range (up to 1000m in open space, less with obstacles).
  • Check for strong RF interference in the area.
Relay clicks but device doesn't activate
  • Check the wiring between the receiver's output terminals (NO/COM/NC) and your device.
  • Ensure your device is functioning correctly when directly powered.
  • Verify the device's power requirements do not exceed the relay's maximum load (10A/2200W).

11. Maintenance

  • Keep the receiver and remote control clean and dry.
  • Avoid exposing the devices to extreme temperatures, humidity, or direct sunlight.
  • Replace the remote control battery (23A 12V) when the indicator light dims or the range decreases.
  • Periodically check wiring connections for tightness and corrosion.

12. User Tips

  • When programming, ensure you are close to the receiver for reliable signal reception.
  • The remote control code is programmed directly onto the receiver unit; it cannot be cloned from another remote at a distance.
  • For optimal range, slightly stretch the antenna on the receiver.

13. Warranty and Support

For any questions about the product, troubleshooting assistance, or technical support, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.

© 2024 WenQia. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.