1. Safety Warnings and Precautions
- This device is for indoor use only.
- Do not expose this device to dripping or splashing water or any other hazardous liquids.
- This product is not waterproof.
- Installation should only be performed by adults.
- Do not install near any heat sources.
- Do not use this device with dimmers.
- Do not use this device in totally enclosed luminaires; use only in open luminaires.
- If this device is significantly heavier than the one it replaces, ensure mechanical stability of the luminaire and lamp holder to prevent damage.
- Risk of electric shock: Use in dry locations only.
- Do not install this device with wet hands.
- Do not wire with power on. Always turn off power before wiring.
2. Setup and Installation
2.1. Wiring Diagram for Receiver Module
Ensure power is off before proceeding with wiring. The smart switch receiver requires AC 90V-250V input.

Description: The diagram illustrates how to connect the smart switch receiver. Connect the Live (L) and Neutral (N) wires from your AC power source to the 'Input' terminals. Connect the Live (L) and Neutral (N) wires of your light fixture to the 'Output' terminals. The 'Settings Button' is also indicated. Installation can be done using double-sided tape or by placing it behind a suspended ceiling.
2.2. RF Remote Control Pairing (Wall Panel Switch)
The red indicator light on the smart receiver indicates it is in pairing mode.
Manual Switch Mode
Without a remote control, press the settings button on the smart receiver once to turn it ON, and press it again to turn it OFF.
Latch Mode Setting (One button ON, one button OFF)
This mode is suitable for controlling one smart receiver with one remote control button (press once to turn ON, press again to turn OFF).
- Press the settings button on the smart receiver twice. The red indicator light will flash and then stay ON.
- Press the button on the RF remote control (wall panel switch) that you wish to pair. The red indicator light on the receiver will flash and then turn OFF, indicating successful pairing.
Toggle Mode Setting (Same button, press and hold to open, release to close)
This mode allows you to turn the device ON by pressing and holding a button, and OFF by releasing it.
- Press the settings button on the smart receiver once. Wait for the LED to light up, entering the setting state.
- Press the desired button (e.g., button A) on the RF remote control once. The indicator light on the receiver will flash and turn OFF, indicating successful pairing.
Jog Mode Setting (Momentary Mode - Same key, press and hold to open, release to close)
- Press the settings button on the smart receiver four times. The red indicator light will flash and then stay ON.
- Press the button on the RF remote control that you wish to pair. The red indicator light on the receiver will flash and then turn OFF, indicating successful pairing.
Reset RF Pairing
To clear all stored RF remote control data from the receiver's memory:
- Press the receiver's settings button eight times.
- The receiver's LED will flash eight times, confirming that the reset function is complete.
2.3. WiFi Connection (Smart Life App)
The green indicator light on the smart receiver indicates it is in WiFi pairing mode.
Preparation
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network.
- Turn on Bluetooth and Location Services on your smartphone.
- Keep the smart receiver, your smartphone, and your Wi-Fi router close to each other.
App Download and Setup
- Download the 'Smart Life' app from your app store.
- Register a new account or log in with an existing one.
Pairing the Smart Receiver
- Reset the Smart Receiver: Press and hold the settings button on the smart receiver for more than 6 seconds until the LED indicator flashes quickly (green).
- Open the 'Smart Life' app, tap the '+' icon in the upper right corner to enter the device addition page.
- Select 'Auto Scan'. The app will search for nearby devices.
- Once the device is discovered, its icon and name will appear. Follow the in-app prompts to add the device.
- Enter your 2.4GHz Wi-Fi network password when prompted.
- After successful connection, the LED on the smart receiver will stay ON (green), and you will see the device on the app's home page.
2.4. Connecting to Third-Party Applications (Alexa, Google Assistant)
To integrate with voice assistants like Amazon Alexa or Google Assistant:
- Download and register an account for the respective third-party app (e.g., Amazon Alexa).
- Ensure your smart receiver is already added and working in the 'Smart Life' app.
- In the 'Smart Life' app, open the device control page for your smart receiver.
- Tap the settings icon (usually in the upper right corner) to go to the device information page.
- You will see details of supported third-party apps. Select the desired app (e.g., Alexa).
- Follow the on-screen prompts to link your 'Smart Life' account with the third-party app.
3. Operating Instructions
3.1. App Remote Control
Control your lights from anywhere at any time using the 'Smart Life' app. The app allows you to:
- Turn lights ON/OFF.
- Set schedules and timers for automatic operation.
- Create scenes for different moods or activities.
- Share device control with family members.
- Activate 'Away Mode' for security.

Description: The Smart Life app provides comprehensive control over your smart switch, including scheduling, device sharing, scene creation, and away mode.
3.2. Voice Control
Once linked with Amazon Alexa or Google Assistant, you can control your lights with simple voice commands.

Description: Enjoy hands-free control by letting your lights respond to your voice commands through compatible smart assistants.
3.3. RF Remote Control (Wall Panel Switch)
Use the paired RF wall panel switch to manually turn your lights ON/OFF. The system supports flexible pairing configurations:
- One wall switch can control one receiver.
- Multiple wall switches can control one receiver.
The system is designed for no interference when using several switches in the same room.

Description: The system supports flexible pairing, allowing one or more wall switches to control a single receiver without interference.
3.4. Demonstration of Energized State
Watch this video for a visual demonstration of the smart switch's functionality, including app control and relay status settings.
Video Description: This video demonstrates the smart switch in an energized state, showing how to control it via the app (ON/OFF), how to set the relay status to maintain the state before power failure, and how it behaves when energized (off or open).
4. Maintenance
4.1. Battery Replacement for RF Wall Panel Switches
The RF wall panel switches are battery-powered. If the remote control distance decreases or the switch becomes unresponsive, it's time to replace the battery. Please check the specific battery type required by opening the switch casing (commonly CR2032, but verify on your device).
4.2. General Care
- Avoid exposing the device to metal masks, large electronic devices, strong electromagnetic fields, or other sources of interference, as this can affect performance and range.
- Do not use this electronic product abnormally, as it can reduce performance, lifespan, and potentially damage the product or create safety hazards.
5. Troubleshooting
- App Compatibility Issues: If the receiver does not work with the recommended 'Smart Life' app, try using other compatible smart home apps like 'DigmaSmartLite'.
- RF Wall Panel Switch Not Working: If the wall panel switch does not work after closing the battery cover, check if the battery contacts are properly aligned. Sometimes, leaving a tiny gap or adjusting the cover can resolve contact issues.
- No Dimming Capability: This product is a smart relay switch designed for ON/OFF functionality and does not inherently support dimming. If dimming is required, ensure your light fixture and bulbs are dimmable and consider a separate dimmer module if compatible.
- Device Offline in App: Ensure your Wi-Fi network is stable, the device is within range of your router, and your phone's Bluetooth is on during setup. Try resetting the device and re-pairing it if issues persist.
6. Specifications
| Parameter | Value |
| Input Voltage | AC 90V-250V, 50/60Hz |
| Max Current | 10A |
| Max Load (Resistive) | 2200W (AC220V) |
| Max Load (Incandescent) | 2200W (AC220V) |
| Max Load (Inductive) | 500W (AC220V) |
| Max Load (Capacitive) | 200W (AC220V) |
| Max Load (Energy-saving lamp) | 300W (AC220V) |
| Max Load (LED) | 300W |
| RF Working Frequency | 433MHz |
| RF Remote Control Distance | Greater than 25 meters (open area) |
| Material | Plastic |
| Certification | CE, FCC |
| WiFi Standard | IEEE 802.11 b/g/n |

Description: The smart receiver is versatile and can be used with a wide range of home appliances, making 97% of home appliances controllable.
7. Warranty and Support
This QIACHIP smart home wireless remote control switch comes with a 3-year warranty.
For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly through your purchase platform.
A detailed user manual in PDF format is available for download. Please refer to the seller's product page for the link to the PDF document.
8. User Tips
- Excellent Range: Users have reported successful remote operation from distances of 30 meters, making it suitable for controlling outdoor lights or devices from inside your home.
- Battery Check: The wall panel switches require batteries. If you experience reduced range or unresponsiveness, check and replace the batteries. Ensure proper alignment of battery contacts when closing the cover.
- Alternative Apps: If you encounter issues with the 'Smart Life' app, some users have found success with other compatible apps like 'DigmaSmartLite'.
- RF Remote Compatibility: For optimal performance, it is recommended to use QIACHIP brand remote controls (transmitters) with this receiver. Compatibility with remote controls from other brands is not guaranteed.
