Motorcycle Windshield Instruction Manual

1. Product Overview

This manual provides instructions for the installation, operation, and maintenance of your Otilli Motorcycle Windshield, designed specifically for Yamaha MT-07 models from 2021 to 2023. This accessory is engineered to enhance your riding experience by improving aerodynamics and deflecting wind.

Key Features:

• Improved aerodynamics for a smoother ride.
• Effective wind deflection for driver comfort and safety.
• High-quality ABS plastic construction for durability.
• Available in Transparent and Black finishes.
• Designed for easy installation.

2. Safety & Warnings

Important Safety Information: Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• Keep the device out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture unnecessarily.
• Handle with care to avoid cuts or injuries during installation.

3. Package Contents

Please check the package for the following items:

• 1 x Otilli Motorcycle Windshield (Transparent or Black)

Note: Mounting screws are NOT included. This windshield is designed to be installed using the existing screws on your Yamaha MT-07 motorcycle.

4. Setup and Installation

The Otilli Motorcycle Windshield is designed for straightforward installation. For best results, ensure your motorcycle is stable and turned off before beginning.

Installation Steps:

1. Prepare the Motorcycle: Park your Yamaha MT-07 on a level surface and ensure it is stable.
2. Locate Mounting Points: Identify the existing mounting points on your motorcycle's front fairing where the windshield will attach. These are typically around the headlight assembly.
3. Position the Windshield: Carefully align the holes on the new windshield with the mounting points on your motorcycle.
4. Secure the Windshield: Use the original screws from your motorcycle to fasten the windshield. There are typically four screws on each side.
5. Tighten Screws: Hand-tighten all screws initially. Once all screws are in place, tighten them securely. The recommended torque for these screws is approximately 0.7 Nm. Do not overtighten to avoid damaging the plastic or the motorcycle's fairing.
6. Final Check: Gently test the stability of the installed windshield to ensure it is firmly attached and does not wobble.

Image: Installation diagram showing screw locations and recommended torque (0.7 Nm).

Installation Difficulty:

This installation is generally considered suitable for competent DIY mechanics. Many users report easy installation, often completed in under 2 minutes.

Visual Reference:

Images: Comparison of motorcycle before and after windshield installation, and a close-up view of the installed black windshield.

5. Operating Instructions

The Otilli Motorcycle Windshield operates passively once installed. Its primary function is to deflect air away from the rider, reducing wind buffeting and improving aerodynamic efficiency. No active controls or adjustments are required after installation.

6. Maintenance

To ensure the longevity and clarity of your windshield, follow these maintenance guidelines:

• Cleaning: Clean the windshield regularly with a soft cloth and mild soap and water. Avoid using abrasive cleaners, solvents, or harsh chemicals (e.g., ammonia-based cleaners) as these can damage the ABS plastic.
• Inspection: Periodically inspect the windshield for any cracks, damage, or loose mounting screws.
• Tightening: If any screws appear loose, gently tighten them to the recommended torque of 0.7 Nm.
• Storage: When not in use for extended periods, store the motorcycle in a covered area to protect the windshield from prolonged exposure to harsh weather conditions and UV rays.

7. Troubleshooting

• Windshield Feels Loose: Check all mounting screws. Ensure they are tightened to the recommended 0.7 Nm. Avoid overtightening.
• Poor Fit: Double-check that your motorcycle model is a Yamaha MT-07 from the years 2021-2023. This windshield is specifically designed for these models.
• Scratches/Damage: Minor scratches can sometimes be buffed out with specialized plastic polish. For significant damage, replacement may be necessary.

8. Specifications

Image: Diagram illustrating the key dimensions of the windshield.

Color Options:

Images: Transparent and Black versions of the windshield.

9. User Tips

• Quick Installation: Many users find the installation process to be very quick and straightforward, often taking less than 2 minutes.
• Aesthetic Impact: The black tinted version of the windshield is noted by users to give the motorcycle a more aggressive look.
• Use Original Screws: Always use the existing screws from your motorcycle for installation, as the windshield does not come with its own mounting hardware.

10. Frequently Asked Questions (FAQ)

Q: Does this windshield fit the Yamaha MT-07 2018 model?

A: No, this windshield is specifically designed for Yamaha MT-07 models from 2021 to 2023.

Q: Is this windshield compatible with the MT-09 2021?

A: No, this product is designed for the MT-07 model range (2021-2023) and is not compatible with the MT-09.

Q: Does the windshield come with mounting screws?

A: No, the windshield does not include screws. It is designed to be installed using the original screws already present on your motorcycle.

11. Manufacturer Information

Manufacturer:

Guangzhou Otili Trading Co., Ltd
Address: CN-Nanhai District, Foshan City, Guangdong Province, Dali Town, Fengxiu Building, 9th Floor
Tel: +86-13632806159
Email: 243226686@qq.com

EU Authorized Representative:

SUCCESS COURIER SL
Address: ES-CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947, Spain
Tel: +34-910602659
E-mail: successservice2@hotmail.com

12. Warranty and Support

For any questions, concerns, or support needs regarding your Otilli Motorcycle Windshield, please contact the seller or manufacturer directly using the contact information provided above. Please retain your proof of purchase for warranty claims.