1. Introduction
Thank you for choosing the YRYTAT Rotary Tattoo Machine Pen. This manual provides essential information for the safe and effective use of your new tattoo machine. Please read it thoroughly before operation and retain it for future reference.
2. Safety Warnings and Cautions
WARNING
- This product contains an internal lithium battery, which poses a potential fire risk.
- Do not disassemble, puncture, crush, expose to high temperature, or dispose of in fire or water.
- For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.
CAUTION
- It is prohibited to modify, disassemble, or repair products without authorization.
- Read these instructions carefully and retain them for future reference.
- Protect the product from exposure to extreme temperatures, direct sunlight, or humid environments.
- Do not place the product near heat sources (e.g., radiators, stoves) as the surface may become hot.
- This product is intended to be used in dry areas only.
- Environmental Safety: This product is classified and recycled according to the EU WEEE directive. Batteries are recycled separately; do not throw them into fire or water.
Explanation of Symbols
- ➔ Direct current (DC)
- ☁ USB plug
- CE: This symbol indicates compliance with European Union health, safety, and environmental protection standards (ENIEC 55014-1:2021, EN IEC 61000-3-2:2019+A1:2021+A2:2024, IEC 62321-3-1:2013, IEC 62321-7-1:2015 & IEC 62321-7-2:2017).
- UKCA: This symbol stands for "United Kingdom Conformity Assessed" and confirms compliance with UK market regulations.
3. Package Contents
Please check the package for the following items:
- 1x YRYTAT Rotary Tattoo Machine Pen
- 1x Premium RCA Cord
4. Product Overview
The YRYTAT Rotary Tattoo Machine Pen features a powerful brushless motor and a detachable design for ease of use and maintenance. It is compatible with standard tattoo cartridges.
5. Specifications
| Feature | Detail |
|---|---|
| Brand Name | YRYTAT |
| Model Number | Tattoo Gun |
| Type | Electric Rotary Tattoo Machine Pen |
| Motor Type | Powerful Brushless Motor (Swiss Motor) |
| Motor Speed | 12000 rpm (at 12V) |
| Working Voltage | 5-12V |
| Stroke Depth / Needle Length | 0-3.5 mm (Adjustable) |
| Connection | RCA Jack |
| Material | Aluminum Alloy (CNC crafted) |
| Noise Level | Lower noise |
| Compatibility | Standard Cartridges |
| Commodity Quality Certification | 3C, CE, UKCA |
| Origin | Mainland China |
| Batteries Included | No |
6. Setup
- Unpack: Carefully remove all components from the packaging.
- Inspect: Check the tattoo machine pen and RCA cord for any visible damage.
- Attach RCA Cord: Connect the premium RCA cord to the RCA jack on the tattoo machine pen.
- Connect to Power Supply: Connect the other end of the RCA cord to a compatible tattoo power supply.
- Insert Cartridge Needle: Twist and push a standard cartridge needle into the front of the pen until it clicks securely into place.
- Adjust Needle Depth: Rotate the adjustable aluminum alloy grip to set the desired needle depth (stroke length).
7. Operation
The tattoo machine pen features intuitive button controls:
- Button (0):
- Long press: Power on/off the device.
- Short press: Start/pause the operation.
- Button (+): Increase voltage by 0.1V or 0.5V increments (depending on model/firmware).
- Button (-): Reduce voltage by 0.1V or 0.5V increments (depending on model/firmware).
Always ensure proper hygiene and sterilization practices are followed before and after each use.
8. Maintenance
- Cleaning: After each use, carefully clean the exterior of the machine. Avoid liquid contact with the sensor or electronic components.
- Chemicals: Do not use harsh chemicals or abrasive cleaners, as these can damage the machine's finish or internal components.
- Surface Use: The product is not intended for use on hard surfaces; only soft surfaces.
- Storage: Store the machine in a dry, clean environment away from direct sunlight and extreme temperatures.
9. Troubleshooting
If you encounter issues with your tattoo machine pen, please refer to the following common solutions:
- Machine Not Turning On:
- Ensure the RCA cord is securely connected to both the machine and the power supply.
- Verify that the power supply is switched on and functioning correctly.
- Check if the machine's internal battery (if applicable) is charged.
- Inconsistent Needle Movement:
- Ensure the cartridge needle is properly seated and locked into the pen.
- Check the voltage setting on your power supply; adjust as needed.
- Inspect the needle cartridge for any defects or damage.
- Excessive Vibration or Noise:
- Verify that all detachable parts (grip, motor housing) are securely tightened.
- Ensure the needle cartridge is correctly installed.
- If the issue persists, it may indicate an internal problem; contact support.
For persistent issues not covered here, please contact customer support.
10. User Tips
- Regularly clean and sterilize your equipment to maintain hygiene and prolong product life.
- Experiment with different voltage settings to find the optimal speed for various tattooing techniques (lining, shading, coloring).
- Always use high-quality, compatible cartridge needles for best results and to prevent damage to the machine.
- Keep the machine's detachable design in mind for easier cleaning and potential part replacement.
11. Warranty and Support
For detailed warranty information and customer support, please refer to the seller's official website or contact their customer service department. You may also find additional guides and documents, including a user manual in PDF format, available for download from the product page or seller's resources.
Reference PDF: A user manual (PDF) is available for this product. You can typically find it on the product's detail page or the manufacturer's support section.