1. Product Introduction
The YunBao EG is a dedicated wired remote controller for Panasonic professional video cameras. It controls aperture, focus, zoom, and recording functions. It is compatible with models including PX298MC, UX180, DVX200, AC130, PV100, FC100, and UX90.
Watch a demonstration of the controller's functions:
Video: Demonstration of the YunBao EG controller's zoom and focus adjustments.
2. Setup Instructions
2.1 Handle Installation
- Loosen the knob until there is sufficient space between the clamps.
- Mount the controller onto the camera handle.
- Tighten the clamp to secure the controller in place.
Warning: Do not over-tighten, as this may damage the equipment.

Image: YunBao EG controller with its coiled cable and 2.5mm and 3.5mm jacks.
2.2 Connecting the Control Cables
- Turn off both the camera and the controller.
- Plug in the control cables to the corresponding ports as specified.
- Enter the camera menu, and set IRIS and FOCUS to Manual (M).

Image: Detailed diagram of the YunBao EG controller's ports and controls.
2.3 Mode Selection (A/M Switch)
Toggle the switch to select automatic or manual mode for aperture control.
3. Operating Instructions
- REC button (red): Start / Stop recording.
- W button: Quickly zoom the lens to wide-angle.
- T button: Quickly zoom the lens to telephoto.
- Zoom knob: Adjust zoom speed by rotating the knob.
- Aperture & Focus: Refer to the diagram below for knob operation.

Image: Detailed diagram of the YunBao EG controller's ports and controls.
4. Care and Maintenance
- Do not use or store the product in dusty, humid, or high-temperature environments.
- Avoid water splash when using near water to prevent malfunction.
- Do not apply excessive force when plugging or unplugging cables to avoid damage.
- Prevent the device from strong vibration or impact.
- Do not use thinners, alcohol, or benzene-based cleaners. Clean only with a slightly damp soft cloth.
- Do not place any objects on top of the controller.
- Do not disassemble the controller by yourself.
5. Troubleshooting
If the controller is not responding, ensure both the camera and controller are powered off before connecting, and that the cables are securely plugged into the correct ports (3.5mm for FOCUS/IRIS, 2.5mm for ZOOM/S). Verify camera settings for IRIS and FOCUS are set to Manual (M).
6. Technical Specifications
| Feature | Specification |
|---|---|
| Clamp Mounting Diameter | 10mm – 30mm |
| 3.5mm Jack Function | Connects to camera's FOCUS/IRIS port |
| 2.5mm Jack Function | Connects to camera's ZOOM/S port |
| Control Cable Length | 5m |
| Compatible Brand | Panasonic |
| Product Weight | 0.5 kg |
| Package Dimensions (L x W x H) | 16cm x 11cm x 14cm |
7. User Tips
- For optimal control, ensure the camera's IRIS and FOCUS settings are in Manual mode.
8. Warranty and Support
This product comes with a standard manufacturer's warranty. For technical support or warranty claims, please contact your retailer or the manufacturer directly.
A detailed user manual in PDF format is available for download: YunBao EG Controller User Manual (PDF).