1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your new Motorcycle Exhaust Tip Muffler Power. Please read all instructions carefully before use to ensure proper function and to prevent damage or injury.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- General Warning: This product is not a toy. Keep out of reach of children under 3 years of age.
- Installation Warning: For safety reasons, installation should be performed by a qualified technician or someone with basic mechanical knowledge.
- Vehicle Safety: Ensure the motorcycle is turned off and secured before installation or maintenance.
- Electrical Safety (if applicable): If the product contains electrical components, use only with 12V DC systems (standard for most motorcycles). Using with other voltages may cause damage or fire.
- Heat Warning (if applicable): Some parts may become hot during use. Allow to cool before handling.
- Road Safety: Improper installation may affect vehicle handling, visibility, or safety. Always test the product at low speed before regular use.
- Modification Warning: Do not modify the product housing, wiring, or mounting points, as this may affect performance and safety.
- Legal Compliance: This aftermarket part may not be street legal in all jurisdictions. Check local regulations before installation.
3. Product Information
- Product Name: Motorcycle Parts
- Model: Universal
- Batch/Serial Number: NO
4. Manufacturer Information
- Manufacturer: Guangzhou Kesu E-commerce Co., Ltd, Shop Room 3007, No.74 Huanhe Road, Baiyun District, Guangzhou City, Guangdong Province, China.
- Manufacturer Contact: +86-18666727576
- EU Authorized Representative: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain.
- EU Representative Contact: successservice2@hotmail.com
5. Setup (Installation Instructions)
Before You Begin:
- Verify that the product is compatible with your motorcycle model and year (e.g., 2002-2007 Yamaha Grizzly 660 ATV, Grizzly 350 2007 & up).
- Gather necessary tools (e.g., screwdrivers, Allen keys, wrenches).
- Read all instructions completely before starting installation.
General Installation Guidelines:
- Preparation: Ensure the motorcycle is turned off, cooled down (if applicable), and securely positioned on a stable surface.
- Remove Original Part: Carefully remove the existing exhaust tip or related part following your motorcycle's service manual.
- Prepare New Part: Remove any protective films or packaging. Check the new exhaust tip for any visible damage.
- Install New Part: Mount the new accessory according to the specific requirements:
- For bolt-on parts (this product): Align mounting holes and fasten securely using the provided hardware.
- For electrical parts (if applicable): Connect to original wiring harness, ensuring correct polarity (+/-).
- For adhesive parts (if applicable): Clean surface thoroughly before applying.
- Test Functionality: Before final tightening, visually inspect the fitment and ensure there are no obstructions.
- Secure and Tighten: Once properly positioned, tighten all screws/bolts to manufacturer specifications. Do not overtighten.
- Final Check: After installation, perform a final visual inspection to ensure everything is correctly installed and secure.
Figure 1: Chrome exhaust tip with three hex bolts ready for installation.
Figure 2: Top view of the exhaust tip, highlighting mounting points.
Figure 3: Exhaust tip with bolts partially installed.
Figure 4: Securely fastened exhaust tip.
Figure 5: Bottom view of the exhaust tip.
6. Operating
Once properly installed, the exhaust tip operates as an integral part of your vehicle's exhaust system. No specific user operation is required beyond ensuring it remains securely attached and free from damage.
7. Maintenance
- Regular Inspection: Periodically check the exhaust tip for any signs of looseness, damage, or corrosion. Ensure all mounting bolts are tight.
- Cleaning: Clean the chrome surface with a soft cloth and a mild, non-abrasive cleaner designed for automotive finishes. Avoid harsh chemicals that could damage the chrome.
- Heat: Be aware that the exhaust tip will become very hot during vehicle operation. Allow it to cool completely before performing any maintenance or inspection.
8. Troubleshooting
- Loose Fitment: If the exhaust tip feels loose, re-tighten the mounting bolts. If the issue persists, inspect the mounting points for wear or damage.
- Unusual Noises: If you hear rattling or other unusual noises from the exhaust tip, check for loose connections or contact with other vehicle components. Ensure it is securely mounted and not vibrating against anything.
- Corrosion/Discoloration: This can often be prevented with regular cleaning. If corrosion appears, specialized chrome polish may help, but severe corrosion might indicate material degradation.
9. Specifications
| Feature | Detail |
|---|---|
| Material | High quality Aluminum |
| Color | Chrome |
| Origin | Mainland China |
| Package Length | 20 cm |
| Package Width | 10 cm |
| Package Height | 5 cm |
| Package Weight | 0.5 kg |
10. User Tips
Users often inquire about specific dimensions for compatibility with their existing exhaust systems. It is recommended to measure your current exhaust outlet and compare it with the product's specifications. If detailed dimensions are not provided in the product listing, consider contacting the seller directly for precise measurements to ensure a perfect fit.
11. Warranty & Support
For any warranty claims, technical support, or inquiries regarding your product, please contact the seller or manufacturer directly using the contact information provided in Section 4 of this manual. Please retain your proof of purchase for any warranty-related requests.
A PDF version of this user manual may be available for download from the seller's product page: User Manual (PDF)