1. Introduction
This manual provides essential information for the safe and effective installation, operation, and maintenance of your new Dynamic Flowing LED Turn Signal Side Marker Lights. These lights are designed to enhance the visibility and aesthetic of your vehicle with a modern, dynamic amber LED sequence.

Figure 1: Dynamic Flowing LED Turn Signal Side Marker Lights
2. Safety & Warnings
Important Safety Information
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old. Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
3. Package Contents
Your package should contain the following items:
- 2 x Dynamic Flowing LED Turn Signal Side Marker Lights (one pair)
4. Setup and Installation
These side marker lights are designed for a direct replacement, plug-and-play installation. Professional installation is highly recommended to ensure proper fitment and electrical connection.
4.1. Compatible Vehicle Models (Fitment)
These lights are compatible with various BMW models. Please verify your vehicle's model and year against the list below:
- BMW 1 Series E81, E82, E87, E88 (2004-2011) - Not compatible with M1 models
- BMW 3 Series E46 Facelift (2002-2005) - Not compatible with M3 models; Not fit 1997-2001 pre-facelift E46
- BMW 3 Series E90, E91, E92, E93 (2006-2011) - Not compatible with M3 models
- BMW 5 Series E60, E61 (2004-2010)
- BMW X1 E84 Pre-facelift (2010-2012)
- BMW X3 E83 (2004-2010)

Figure 2: Product installed on a BMW fender, showing compatibility with 1, 3, and 5 Series
4.2. Installation Steps
- Ensure your vehicle's ignition is off and the parking brake is engaged.
- Locate the existing side marker lights on your vehicle.
- Carefully remove the old side marker lights. This usually involves unlatching clips or unscrewing fasteners.
- Disconnect the electrical connector from the old light.
- Connect the electrical connector of the new Dynamic Flowing LED Turn Signal Side Marker Light to your vehicle's wiring harness. The lights feature a T10 (W5W/194) interface type for direct plug-and-play.
- Insert the new LED side marker light into the housing, ensuring it clicks securely into place.
- Repeat the process for the other side.
- Test the lights by turning on your vehicle's ignition and activating the turn signals and hazard lights.

Figure 3: Components highlighting Premium ABS Cover, Super Bright SMD LED Chip, and Plug and Play connector
5. Operating Instructions
Once installed, these LED side marker lights operate automatically with your vehicle's turn signal system. When activated, the amber LEDs will illuminate in a dynamic, sequential flowing pattern, providing enhanced visibility and a modern look.
Video 1: Demonstration of the dynamic flowing LED light effect
6. Maintenance
- Cleaning: Clean the lens with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the lights for any signs of damage, loose connections, or moisture ingress.
- Corrosion Resistance: The product is designed with corrosion-resistant materials for long-lasting performance.
7. Troubleshooting
If you encounter any issues, please refer to the following common problems and solutions:
- Lights not working or flickering:
- Check the electrical connection to ensure it is secure and properly seated.
- Verify that the vehicle's fuse for the side marker lights is intact.
- Ensure the T10 plug is correctly inserted into the vehicle's socket.
- Dynamic function not working when the engine is on:
- Some vehicle electrical systems may require a load resistor to prevent hyper-flashing or ensure proper dynamic function. Consult a professional auto electrician if this issue persists.
- Clips or connectors do not fit:
- Double-check the product's compatibility with your specific vehicle model and year.
- Ensure you have the correct interface type (T10). If the connector differs, an adapter may be needed, or the product might not be suitable for your vehicle.
- Light orientation appears upside down or moves:
- Ensure the light is inserted in the correct orientation. Some designs may have a specific top/bottom.
- Verify that all clips are fully engaged to secure the light firmly in its housing.
- Flashing direction is from back to front (reversed):
- This is a design characteristic noted by some users. If the aesthetic of the flashing direction (front-to-back vs. back-to-front) is critical, verify this aspect before final installation.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Malcayang |
| Voltage | 12 V |
| Interface Type | T10 (W5W/194) |
| Lumens | 2400LM |
| Item Weight | 0.1 kg (approx. for the pair) |
| Item Type | Turn Signal |
| Light Color | Yellow (Amber) |
| Lens Color Options | Smoked Black / Crystal |
| Material | Premium ABS Cover |
| Dimensions (L x H x W) | Approx. 114mm (4.48in) x 38mm (1.49in) x 90mm (3.54in) |

Figure 4: Product dimensions

Figure 5: Available lens options: Crystal and Smoked
9. User Tips
- Professional Installation: While designed for plug-and-play, professional installation is highly recommended to ensure optimal performance and avoid potential issues.
- Verify Fitment: Always double-check the compatibility list against your specific BMW model and year before purchase and installation.
- Test Connections: Before fully securing the lights, test their function to ensure proper electrical connection and dynamic sequence.
- Flashing Direction: Be aware that the dynamic flashing sequence may flow from the back to the front of the vehicle. If a front-to-back flow is critical for your aesthetic preference, consider this characteristic.
- Connector Check: If you encounter connection issues, ensure the T10 interface matches your vehicle's socket. If not, consult a professional for potential adapters or alternative solutions.
10. Frequently Asked Questions (FAQ)
- Q: What are the possible uses for this item?
- A: This item is designed for use as a Turn Signal side marker light.
- Q: Are there 2 pieces in the package? Is the price for a pair?
- A: Yes, the package typically includes 2 pieces (a pair) of side marker lights.
- Q: When I turn on the engine, the dynamic function doesn't work. Does it need a resistor?
- A: Some vehicle electrical systems may require a load resistor to ensure the dynamic function works correctly when the engine is running. It is recommended to consult with a professional auto electrician.
- Q: Is it compatible with BMW 1 Series E87?
- A: Yes, it is compatible with BMW 1 Series E87 models from 2004-2011 (excluding M1 models).
- Q: I can't connect it due to the connector. Is there any adapter?
- A: The lights are designed with a T10 (W5W/194) interface. Please ensure your vehicle's socket matches this type. If not, you may need to source an appropriate adapter or consult a professional for assistance.
11. Warranty & Support
For product support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative.
Manufacturer Information:
- Company Name: Guangzhou yangchi auto parts co.LTD
- Address: CN-2 # 1003 min jie ke chuang, minying ke ji yuan, tai he zhen, baiyun district, Guangzhou, China
- E-Mail: ouyan99@dingtalk.com
- Telephone: 86-13421389711
EU Authorized Representative:
- Company Name: CET PRODUCT SERVICE LTD
- Address: Osterholzallee 144, 71636 Ludwigsburg Germany
- E-Mail: info.cetservice@gmail.com
- Telephone: +4971416432236
Note: The EU Authorized Representative acts for cross-border sellers and is not responsible for after-sales services related to product quality or infringement issues. The manufacturer/importer/seller is solely responsible.
Additional Resources:
A detailed user manual in PDF format may be available for further reference: View User Manual (PDF)