KHUDAYAROV m05

Contents

User Manual: KHUDAYAROV m05 Mini CCTV IP Microphone Audio Sound Mic Cable Adapter

For Security IP Audio Camera Module Boards

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your KHUDAYAROV m05 Mini CCTV IP Microphone Audio Sound Mic Cable Adapter. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Product Overview

The KHUDAYAROV m05 is an add-on mini audio box designed for IP cameras that require audio functionality. It features a high-sensitivity microphone and a built-in 12V power regulator, offering a plug-and-play solution for integrating audio into your security surveillance system. Its compact design and high sensitivity make it suitable for various security monitoring applications.

Key features include:

  • High Sensitive microphone
  • Built-in 12V power regulator
  • Plug & Play functionality
  • Extremely Sensitive audio capture
  • Great for Security Monitoring
  • Higher Signal-to-Noise (S/N) Ratio
  • Effective range: 150 Square meters
Front view of the mini CCTV microphone with its two-pin connector and wiring.

Figure 1: KHUDAYAROV m05 Mini CCTV IP Microphone

3. Specifications

Feature Specification
Model Number m05
Brand Name KHUDAYAROV
Work Voltage 4-14V
Work Current 5mA-60mA
Sensitivity 200mA/ubar
Frequency Response 100-6000Hz
Max Output Voltage 5V-upp
Dimensions (approx.) 6mm (diameter) x 6mm (height)
Connector Width (approx.) 3mm
Origin Mainland China
Certification CE
Diagram showing the dimensions of the mini CCTV microphone: 6mm diameter, 6mm height, and 3mm connector width.

Figure 2: Microphone Dimensions

4. Package Contents

Each lot includes:

  • 10 x Mini CCTV Audio Microphone Mic (m05)

Note: The IP camera module board is not included. If you require an IP board, please contact your seller.

5. Setup and Installation

The KHUDAYAROV m05 microphone is designed for easy integration with compatible IP camera module boards. Follow these steps for installation:

  1. Identify Connection Points: Locate the audio input and power supply pins on your IP camera module board. Refer to your camera board's manual for specific pinouts.
  2. Connect Wiring: The microphone features a 4-wire connection. Carefully connect the wires as follows:
    • Red wire: Connect to Power+ (positive power supply, typically 4-14V).
    • Black wire: Connect to Power- (negative power supply/ground).
    • S- (Black signal wire): Connect to the negative audio signal input on your camera board.
    • S+ (Green signal wire): Connect to the positive audio signal input on your camera board.
  3. Secure Connection: Ensure all connections are firm and correctly aligned to prevent short circuits or signal loss.
  4. Mounting: Position the microphone in a suitable location within the surveillance area for optimal audio capture. Consider factors like distance from sound sources and potential obstructions.
The mini CCTV microphone connected to an IP camera module board, illustrating a typical installation.

Figure 3: Microphone Connected to an IP Camera Module Board

6. Operation

Once correctly installed and powered, the KHUDAYAROV m05 microphone operates automatically. It is designed for continuous audio monitoring within its effective range of 150 square meters.

  • Audio Monitoring: The microphone will capture ambient sounds, which will be processed by your connected IP camera module board.
  • Sensitivity: Due to its high sensitivity, the microphone can pick up subtle sounds, enhancing the audio surveillance capabilities of your system.

Video 1: Product showcase of the mini CCTV microphone.

7. Maintenance

The KHUDAYAROV m05 microphone requires minimal maintenance to ensure reliable performance:

  • Cleaning: Keep the microphone free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquid cleaners or solvents.
  • Environmental Conditions: Ensure the microphone is installed in a dry environment, protected from extreme temperatures, humidity, and direct exposure to water.
  • Cable Integrity: Periodically check the wiring for any signs of wear, damage, or loose connections.

8. Troubleshooting

If you encounter issues with your microphone, refer to the following troubleshooting tips:

Problem Possible Cause Solution
No audio output Incorrect wiring; No power; Faulty camera audio input; Microphone malfunction. Verify all wiring connections (Power+, Power-, S+, S-). Check power supply to the camera board. Test with another known-good audio input if possible. Contact support if microphone is suspected faulty.
Poor audio quality (static, low volume) Interference; Microphone too far from sound source; Loose connection; Environmental noise. Ensure microphone is away from strong electromagnetic fields. Reposition microphone closer to the desired sound source. Check and secure all wiring connections. Reduce ambient noise if possible.
Microphone not recognized by camera Incompatible camera board; Incorrect camera settings. Confirm compatibility with your specific IP camera module board. Check camera settings to ensure audio input is enabled and configured correctly.

9. User Tips

  • Analog Camera Compatibility: While designed for IP camera module boards, some users may inquire about connecting to analog CCTV cameras. For such applications, an additional audio-to-analog converter or a DVR with audio input capabilities would be required. Ensure your analog system supports external audio input.
  • Optimal Placement: For the best audio capture, place the microphone in a central location within the monitoring area, away from direct airflow (e.g., vents, fans) to minimize wind noise.
  • Cable Management: Route the microphone cable carefully to avoid kinks, pinches, or exposure to sharp edges, which can damage the wiring and affect performance.

10. Warranty and Support

This product comes with a One Year Warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use.

For detailed instructions and further technical information, you may refer to the official user manual PDF available at: User Manual (PDF).

If you experience any issues or require technical assistance, please contact your seller or the manufacturer's support channel.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.