Important Safety Warnings
Please read all instructions carefully before operating the aircraft. Keep this manual for future reference.
- Responsibility: You are responsible for ensuring that no harm is caused to people or property during operation.
- Installation & Commissioning: Must be strictly in accordance with operating instructions. Maintain a distance of 2 to 3 meters from people to prevent injury.
- Children: Children must be guided by adults. This product is prohibited for children under 14 years old.
- Small Parts: Keep out of reach of children to prevent accidental eating or suffocation.
- Flight Environment: Do not play on roads or in areas with accumulated water. Fly in an outdoor open environment without rain or snow, and with wind power less than 3. Stay away from people, trees, wires, tall buildings, airports, and signal transmission towers.
- Modifications: Do not disassemble or modify the aircraft. This may cause malfunction.
- Battery Safety:
- Do not short-circuit, decompose, or throw batteries into fire.
- Avoid high temperatures and heat (e.g., near electric heating devices).
- Do not immerse batteries in water. Store in a dry place.
- Do not leave batteries unattended while charging.
- Do not mix different types of lithium batteries.
- The motor is a hot part; do not touch it to avoid burns.
- Charging: Use only the charging cable configured by the factory (5V=2A). Other cables may damage the battery.
- Propeller Safety: Keep a safe distance from high-speed rotating propellers to avoid scalp or cut injuries.
- LED Radiation: LED has laser radiation; do not give direct light beam to others.
- Hearing Protection: Do not use the model near your ears; misuse may cause hearing damage.
- Magnetic Environment: Stop operating the model remote control in city areas as required by aeronautical radio station regulations.
- Battery Lifespan: Turn off the switch and unplug the battery when it's used up. Charge after 30 minutes of rest to prevent damage.
1. Package Contents
Ensure all items are present before beginning operation.
- Aircraft x1
- USB charging cable x1
- Fan blade x4
- Lithium battery x1
- Fan blade replacement tool x1
- Screwdriver x1
- Instructions x1 (User Manual)
2. Parts Identification
Familiarize yourself with the main components of your 4DRC V8 Mini Drone.
3. Setup Instructions
3.1 Fan Installation/Replacement
If a fan blade needs replacement, use the provided tools. Ensure correct blade type (A1/A2 or B1/B2) is installed in the corresponding position. Incorrect installation will prevent the aircraft from taking off.
3.2 Remote Control Battery Installation
- Remove the battery cover on the back of the remote control.
- Insert 3x "AAA" batteries (not included) according to the polarity instructions in the battery compartment.
Note:
- Ensure correct polarity when inserting batteries.
- Do not mix old and new batteries.
- Do not mix different types of batteries.
3.3 Aircraft Battery Charging
- Buckle the battery lock of the aircraft.
- Remove the battery from the aircraft.
- Insert the USB charging cable into a USB port of a computer or a power adapter (5V=2A).
- Connect the other end of the USB charging cable to the battery socket.
Charging Indicator:
- The USB red light on the aircraft will go out when charging.
- The red light will always be on when the battery is full.
Warning:
- Only use the aircraft charging cable provided by the factory.
- Do not use other charging cables to avoid accidents.
3.4 Mobile Phone Holder Installation (for Remote Control)
Load your mobile phone onto the remote control as shown in the figure for FPV and mobile control.
4. Operating Instructions
4.1 Remote Control Overview
Familiarize yourself with the remote control's functions:
- Left Joystick (Throttle/Left & Right Lever): Controls altitude and yaw.
- Right Joystick (Advance/Reverse/Left/Right Control Lever): Controls forward, backward, left, and right movement.
- Switch: Power switch.
- Advance Fine-tuning: Adjusts forward/backward drift.
- Left Fine-tuning: Adjusts left/right drift.
- Reverse Fine-tuning: Adjusts backward/forward drift.
- Right Fine-tuning: Adjusts right/left drift.
- Indicator Light: Status indicator.
- Remote Control Mode/Induction Mode: Toggles between control modes.
- One-key Take-off/One-key Landing: Initiates or lands the drone automatically.
- Emergency Stop (short press)/One-key Calibration (long press): Emergency stop or calibration.
- Headless Mode (short press)/One key Return (long press): Toggles headless mode or initiates return.
- 360° Roll: Performs a 360-degree flip.
4.2 Pre-Flight Preparation (Remote Control)
- Turn on the aircraft power and place it on a horizontal plane. The front blue light and red light will flash, indicating frequency matching state.
- Press and hold the power switch button of the remote control. The power indicator will turn on.
- Push the throttle lever up to the top, then down to the end. Code-matching will succeed, and the aircraft lights will change from flashing to solid.
- Horizontal Calibration: Long press the calibration key on the remote control. The LED lights on the aircraft will flash. When they become solid, calibration is complete, and the remote controller will emit a "beep".
Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.
- Start/Stop: Push the left control lever upward to take off. Short press the one-key take-off/landing key to stop flight.
- One-key Take-off and Landing: After unlocking, gently press the "One Key Takeoff/Landing" key. The aircraft will rise to about 1 meter and hover. Press again to land slowly.
4.3 Basic Remote Control Flight
- Altitude Control: Push the left joystick (throttle) up to increase rotation rate and rise; push down to decrease rotation rate and descend.
- Yaw Control: Push the left joystick (rudder) left to turn the nose left; push right to turn the nose right.
- Forward/Backward: Push the right joystick (rudder) up to move forward; push down to move backward.
- Left/Right Deviation: Push the right joystick (rudder) right to deviate right; push left to deviate left.
4.4 Advanced Flight Features (Remote Control)
- 360° Roll: Ensure aircraft is about 1.5 meters from the ground. Short press the 360° roll button, then push the right joystick in the desired direction (left, right, up for forward, down for backward) to perform a flip.
- Headless Mode: The aircraft defaults to headless mode when code-matching. To adjust direction, re-match the code. Short press the "headless mode" key to activate/exit.
Special Prompt: Ensure the aircraft is aligned with a straight line for accurate headless mode flight.
- One Key Return: During flight, press and hold the one-key home button. The aircraft will return automatically. Operating the joystick will cancel this function.
- Speed Switching: Gently press the speed switch button. One "beep" for low-speed, two "beeps" for medium-speed, three "beeps" for high-speed.
- Fine Tuning:
- Forward/Backward: If the aircraft drifts backward, press the forward fine-tuning button. If it drifts forward, press the backward fine-tuning button.
- Left/Right Rotation: If the aircraft rotates right, press the left-rotation fine-tuning key. If it rotates left, press the right-rotation fine-tuning key.
- Left/Right Deviation: If the aircraft deviates right, press the left fine-tuning button. If it deviates left, press the right fine-tuning button.
4.5 Induction and Throw Flight Modes
- Induction Mode: Press the remote control/induction switch button. Operate by placing your palm about 10 cm away from the aircraft body. If the aircraft flies too high, it will automatically descend after 5-15 seconds.
- Inductive Roll: Place both hands on the left and right inductive heads. After two seconds, the aircraft will perform a 360° roll.
- Stop Flight: Take the aircraft and turn it upside down to stop the propellers.
- Throw Flight Mode: Turn on aircraft power and place on a horizontal plane. If no frequency matching within 3 seconds, hold the aircraft, stretch forward until blue and red lights flash slowly, then throw upward or swing hand downward. The aircraft will automatically take off.
5. APP Control
5.1 APP Download and Installation
Scan the QR code below with your mobile phone to download the "4DRC FPV" app from the corresponding app store (iOS App Store, Android Google, Android China).
5.2 APP Connection
- Turn on the aircraft power.
- On your mobile phone/iPad, go to Settings, open Wi-Fi, and find the device name "4DRC********" in the network list. Connect to it.
- Exit the settings and open the "4DRC FPV" app.
- Click "START" to enter the control interface.
- Click "OFF", then turn on the touch joystick.
- Click "More Features" and turn on "aircraft constant light on" to confirm successful frequency matching.
Tip: Try to stay away from other signal sources when flying to avoid interference.
5.3 APP Control Interface Functions
The APP interface provides various controls and features:
- Media library, Photo, Return, Video
- Fixed height, Control panel, More features, Image flipping, Gravity induction
- Throttle and left/right rotation, Direction control, Zoom, Fine-tuning
- Left and right rotating fine-tuning, Fine adjustment for left and right side fly
- One key take off, One key landing, Orbit flight, Roll
- Split screen, Music, Filter, Control model, Language settings, Software version
- Left and right hand switch (for interface setting)
5.4 Pre-Flight Preparation (APP)
- Turn on the aircraft power and place it on a horizontal plane. The front blue light and red light will flash, indicating frequency matching state.
- Connect the APP as described in section 5.2.
- Horizontal Calibration: Click the "correction" icon in the app interface. The LED light on the aircraft will flash. When it becomes solid, calibration is complete.
Note: Calibration must be completed only when the aircraft is placed on a horizontal plane.
- One-key Take-off and Landing: Click the "one-key take-off" icon in the APP control interface to take off. Click the "one-key landing" icon to land slowly.
5.5 Advanced APP Features
- Headless Mode: The aircraft defaults to headless mode. To adjust direction, re-match the code. Enter the APP interface, expand the function menu, and click the headless mode function (AUTO). Click again to exit.
Special Prompt: Ensure the aircraft is aligned with a straight line for accurate headless mode flight.
- Speed Switching: Click the "Third gear acceleration" icon in the APP control interface to switch aircraft speed.
- Fine Tuning: Similar to remote control fine-tuning, adjust for forward/backward drift, left/right rotation, and left/right deviation using the corresponding icons in the APP.
- Gesture Recognition: When facing the camera's front lens, click the gesture photo button in the APP.
- Gesture Photographing: Raise one palm (palm forward) to a horizontal level about 2m in front of the aircraft lens. After recognition, a 3-second countdown starts, and a photo is taken.
- Gesture Recording: Make a fist with one hand (palm forward) to a horizontal level about 2m in front of the aircraft lens. After recognition, a 3-second countdown starts, and recording begins. Recording ends when the fist gesture is recognized again.
Special Prompt: Face the lens from about 2-3M away in good light and background for best gesture recognition.
- MV Interface: Click the "filter interface" icon in the APP. You can choose filter effects and start recording. Recorded videos/pictures are saved to the media library.
Special Prompt: During recording, you can rotate the screen, switch filters, and use joysticks to control direction and altitude.
6. Maintenance
To ensure the longevity and optimal performance of your 4DRC V8 Mini Drone, follow these maintenance guidelines:
- Regularly check fan blades for damage or deformation. Replace as needed using the provided tools and correct blade types (A1/A2 or B1/B2).
- Ensure the battery is fully charged before each flight.
- Store the drone and its components in a dry, cool place away from direct sunlight and extreme temperatures.
- Clean the drone gently with a soft, dry cloth. Avoid water or harsh chemicals.
- When not in use, disconnect the battery from the aircraft to prevent damage.
7. Troubleshooting (FAQ)
Here are some common issues and their solutions:
| Question | Reason | Solution |
|---|---|---|
| The aircraft indicator flashes without any response | The aircraft has insufficient power | Battery charging |
| The blades of the aircraft rotate but cannot fly | 1. Low battery 2. Blade deformation | 1. Charge the battery 2. Replace the blade |
| The aircraft vibrates badly | Blade deformation | Replace the blade |
| Fine tuning is done but still can't make the aircraft stable | 1. Blade deformation 2. Defective motor | 1. Replace the blade 2. Replace the motor |
| After the impact, start the aircraft again and it flies uncontrollably | The three-axis acceleration sensor loses its balance due to impact | After leaving the aircraft for 5-10 seconds, or by the horizontal calibration, it will be ok. For the steps, please refer to the manual, 9.3 horizontal calibration operation. |
| Cannot connect to Wi-Fi | Possible interference or incorrect connection steps. | Ensure aircraft is powered on. Restart aircraft and app. Re-check Wi-Fi settings and connect to "4DRC********". Try flying away from other signal sources. |
| Battery charging LED is always on | Misunderstanding of charging indicator. | The red light on the USB charging cable will go out when charging is complete. If the red light is always on, it means it is still charging. |
| Can two drones be used at the same time? | Query about multi-drone operation. | The manual does not explicitly state multi-drone operation. It is generally recommended to operate one drone at a time to avoid interference, especially with FPV. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | 4DRC |
| Model Number | 4D-V8 |
| Type | HELICOPTER |
| Material | Plastic |
| Dimensions | 13x11x4cm |
| Drone Weight | About 32g |
| Takeoff Weight | About 55g |
| Power Source | Electric |
| Is Electric | Lithium Battery |
| Charging Voltage | 3.7V |
| Charging Time | About 40 minutes |
| Flight Time | 10~20 minutes |
| Remote Distance | 80M |
| Remote Control | Yes |
| Controller Mode | MODE2 |
| Controller Battery | 3 x 1.5 AAA Battery (not included) |
| Control Channels | 4 channels |
| Motor Type | Brush Motor |
| Aerial Photography | Yes |
| Video Capture Resolution | 1080p FHD, 4K UHD, Other (depending on model) |
| Camera Mount Type | Fixed Camera Mount, Other |
| Indoor/Outdoor Use | Indoor-Outdoor |
| Anti-wind Ability | <10km/h |
| State of Assembly | Ready-to-Go |
| Features | App-Controlled, Wi-Fi |
| Operator Skill Level | Beginner, Intermediate, Expert |
| Recommend Age | 14+y |
9. User Tips
- Spare Parts: If you need replacement propellers, batteries, or motors, contact the seller for availability.
- Multiple Drones: While not explicitly stated, it's generally best to operate one drone at a time to avoid potential signal interference, especially when using FPV.
- Wi-Fi Connection Issues: If you experience difficulty connecting to Wi-Fi, ensure the drone is powered on, restart both the drone and the app, and try connecting again. Flying away from other electronic devices or Wi-Fi networks might help reduce interference.
10. Warranty and Support
For detailed warranty information, technical support, or to inquire about spare parts, please refer to the official product documentation or contact the seller directly.
A comprehensive user manual is available in PDF format for further reference: View User Manual (PDF)
For additional assistance, please contact 4DRC Official Store.