1. Introduction
This manual provides detailed instructions for using the LAUNCH X431 CRP919E BT OBD2 Scanner. It is designed to help users understand the device's features, setup, operation, and maintenance to ensure accurate and efficient vehicle diagnostics.
Product Overview: A video showcasing the key features and functionalities of the LAUNCH X431 CRP919E BT.
2. Important Safety Precautions
To prevent personal injury, property damage, or accidental damage to the product, please read and follow these safety guidelines carefully.
2.1. General Safety
- Always operate the tool in a safe and well-ventilated environment.
- Do not operate the tool while driving the vehicle. Always have a second person assist if vehicle operation is required for troubleshooting.
- Use only the included battery and power adaptor. Using an incorrect type may cause an explosion.
- Keep clothing, hair, hands, tools, and test equipment away from all moving or hot engine parts.
- NEVER smoke or allow sparks or flames near the battery or engine.
- Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
- Wear ANSI-approved eye protection when testing or repairing vehicles.
- Place blocks in front of the drive wheels and never leave the vehicle unattended while testing.
- Use extreme caution when working around ignition wires and spark plugs due to hazardous voltage.
- Ensure the vehicle battery is fully charged and the DLC connection is clear and secure to avoid damaging the tool or generating false data.
- Automotive batteries contain sulfuric acid; avoid direct contact with skin.
- Keep the tool dry, clean, free from oil, water, or grease. Use a mild detergent on a clean cloth for cleaning.
- Store the tool and accessories in a locked area out of reach of children.
- Do not use the tool while standing in water or expose it to rain/wet conditions to prevent electric shock.
- This tool is a sealed unit with no end-user serviceable parts. All internal repairs must be done by an authorized facility.
- Keep the tool far away from magnetic devices to prevent screen damage or data erasure.
- Do not attempt to replace the internal rechargeable lithium battery; contact the dealer for replacement.
- Do not disconnect the battery or any wiring cables when the ignition switch is on to avoid damaging sensors or the ECU.
- Do not place magnetic objects near the ECU. Disconnect power to the ECU before welding operations.
- Use extreme caution near the ECU or sensors. Ground yourself when disassembling PROM to prevent static electricity damage.
- Ensure the ECU harness connector is firmly attached when reconnecting to prevent damage to electronic elements.
3. Setup
3.1. Package List
The package contents are for reference only and may vary by destination. Please consult your seller or the supplied packing list for exact details.
- Display tablet x 1
- VCI connector x 1
- Diagnostic cable x 1 (HDB15F to HD15F data cable + HD15M to OBD II adaptor)
- Password envelope x 1 (Contains Product Serial Number and Activation Code)
- Power adaptor x 1 + Switching adaptors x 2
- Type-A to Type-C USB cable x 1
- Quick Start Guide x 1

An illustration of the LAUNCH X431 CRP919E BT package contents, including the display tablet, VCI connector, diagnostic cable, power adaptors, USB cable, password envelope, and quick start guide.
3.2. Components & Controls
The diagnostic system consists of two main components: the Display Tablet and the VCI Device.
Display Tablet
The tablet is the central processing system, receiving and analyzing live vehicle data from the VCI device and displaying test results.
- Microphone: For audio input.
- Type-A USB Port: Connects to the VCI connector for diagnosis via USB cable or to an external USB storage device.
- Type-C USB Port: Connects to an AC outlet for charging or to a PC for data exchange.
- POWER Key: Press for 3 seconds to turn on/off; press once to activate/deactivate LCD; press and hold for 8 seconds for forced shutdown.
- LCD Screen: Displays test results and user interface.
- Speakers: For audio output.
- Rear Camera: For capturing images.
VCI Connector (DBScar VII)
The VCI connector acts as a vehicle communication interface, connecting to the vehicle's DLC socket via the diagnostic cable to read and send vehicle data to the tablet.
- OBD-15 diagnostic connector: Connects to the vehicle's OBD II DLC.
- USB port: Connects the VCI to the tablet via USB cable.
- I/O indicator: Illuminates blue for wireless communication with the tablet, red for USB cable connection.
- VEHICLE indicator: Illuminates green and flashes when communicating with the vehicle.
- POWER indicator: Illuminates solid red when powered up.

Detailed view of the VCI connector with power, vehicle, and I/O indicators, highlighting Bluetooth connectivity up to 30 feet (10m).
3.3. Initial Use & Charging
- Use the included power adaptor to charge the tablet.
- After charging, press the POWER button for 3 seconds to turn on the tablet.
- If the battery is completely discharged, it may take up to 5 minutes of charging before the tool powers on.
3.4. Network Setup
The tablet has built-in Wi-Fi for online functions, software updates, and registration.
- On the Home screen, tap Other Modules > Settings > Network & Internet > WLAN.
- Slide the Wi-Fi switch to ON; the tablet will search for available wireless networks.
- Select your desired network. If encrypted, enter the password.
- Once "Connected" appears, the Wi-Fi connection is established.
3.5. Register & Update
New users must register the device to access full functionalities and updates.
- Tap Login on the Home screen, then select New Registration.
- Fill in all required information (marked with *).
- Input the 12-digit Product Serial Number and 8-digit Activation Code (found in the password envelope).
- Tap Activate, then OK to complete registration.
- The tablet will automatically establish wireless communication with the VCI device.
- Navigate to the update center to download and install available software updates.
4. Operating Instructions
4.1. Screen Layout & Basic Gestures
The tablet features a user-friendly interface with on-screen buttons and gestures.
On-screen Buttons (bottom of screen):
- Home: Navigates to the Android home screen.
- Recent App: Views running applications.
- VCI Connection: Shows VCI connection status (green indicates established communication).
- Screenshot: Captures the current screen.
- Back: Returns to the previous screen.
Basic Gestures:
- Single-tap: Selects an item or launches a program.
- Double-tap: Zooms in on text on a webpage.
- Long press: Displays a contextual menu.
- Slide: Navigates between pages.
4.2. Change System Language
- On the Home screen, tap Other Modules > Settings > System > Language & input > Languages.
- Tap Add a language and select from the list.
- Drag the desired language to the top of the list to set it as the system language.

The LAUNCH CRP919E BT supports 23 languages, including English, Italian, Simplified Chinese, Traditional Chinese, German, Japanese, Russian, French, Spanish, Portuguese, Polish, Turkish, Dutch, Greek, Hungarian, Arabic, Danish, Korean, Persian, Serbian, Finnish, Swedish, Czech.
4.3. Adjust Brightness & Set Standby Time
- Adjust Brightness: Go to Other Modules > Settings > Display > Brightness level and drag the slider.
- Set Standby Time: Go to Other Modules > Settings > Display > Advanced > Sleep and choose the desired sleep time.
4.4. Vehicle Connection
The VCI device connects to the vehicle's DLC. Ensure the vehicle ignition is ON and battery voltage is 11-14 volts.
- For OBDII vehicles: Use the included diagnostic cable (HDB15F to HD15F data cable + HD15M to OBD II adaptor) to connect the VCI to the vehicle's DLC port.
- For non-OBDII vehicles: Select the appropriate non-16pin adaptor (sold separately) and connect it to the data cable, then to the vehicle's DLC port.
4.5. Diagnostic Functions
The CRP919E BT offers comprehensive diagnostic capabilities.
Intelligent Diagnose
This module uses VIN information to quickly access vehicle data from the cloud server, performing quick tests and retrieving historical diagnostic records.
- Tap Intelligent Diagnose on the Home screen.
- The tablet will attempt to read the vehicle VIN.
- If VIN is found, you can tap Diagnostic to start a new session or Scan History to view past records.
- If VIN is not found, you can manually enter it or use the VIN recognition module.
Local Diagnose
This mode allows for manual, step-by-step diagnostic sessions.
- Tap Local Diagnose to select the vehicle make (e.g., Ford, Chevrolet, VW, Honda, Toyota).
- Turn the ignition key to ON.
- Confirm vehicle information.
- Select the desired test item.
Health Report (Quick Test)
Quickly accesses all electronic control units (ECUs) and generates a detailed vehicle health report.
- Tap Health Report on the test item selection screen.
- The system will scan ECUs and display fault codes (red) or normal functioning (black).
- You can View Record, Quick access to functions, Save the report, or Clear DTCs.
System Scan
Scans for installed systems on the vehicle.
System Selection
Manually select a test system and function step-by-step.
Read Fault Code
Displays detailed information of DTC records from the vehicle's control system.
Read Data Stream
Views and records real-time Live Data, including parameters and sensor information. Data can be displayed in text, waveform graphs, or combined graphs for comparison.
Actuation Test (Bi-directional Control)
Accesses vehicle-specific subsystem and component tests, allowing the tablet to output commands to the ECU to drive actuators and determine system integrity.

The CRP919E BT offers OE-level full system diagnostics with bidirectional control, allowing active tests on components like lights, windows, and wipers.
Full System Diagnostics
The CRP919E BT can access most car ECUs to read/clear codes, retrieve live data, freeze frame, ECU information, and perform active tests, matching, adaptation, and reset monitors across a full range of car models and systems.
- Engine System: Detects ignition, fuel injection, air/fuel ratio, and exhaust emission conditions.
- Transmission: Diagnoses slipping or difficult shifting issues.
- ABS System: Retrieves ABS codes and inspects brake components.
- SRS System: Detects electronic parameters of impact sensors, control module, and airbags.
- Brake System: Diagnoses issues like mushy brake pedal, unusual odor or noise.
- Emission System: Checks for issues affecting harmful gas reduction.
- Fuel System: Diagnoses starting issues or 'Check Engine' light.
- Wiper System: Diagnoses chattering or streaking wipers.
- Light System: Diagnoses rapid signal blinking or dimming lights.
- And many more systems like SAS, TPMS, IMMO, Battery, Oil Service, DPF, Air Conditioning.

Visual representation of OE-Level Full Systems Diagnostics, showing the ability to retrieve module information, read/erase codes, and view freeze frame data across various vehicle systems.
ECU Coding
Performs online and offline ECU coding for advanced repairs.
- Online Coding: Accesses online vehicle repair data for high-level repairs.
- Offline Coding: Reads code from original module and writes to new module (e.g., VIN to new ECU).
- Component Matching: Matches, relearns, calibrates, or initializes adaptive data for components after repair/replacement (e.g., suspension calibration, seat matching, sunroof initialization, gearbox matching, injector calibration, transmission adaptation).
- Retrofit/Modification: For example, retrofitting different battery types, upgrading lights to LED.
- Unlock Hidden Features: Disables auto start-stop, daytime running light, safety belt chiming, deletes transport mode, deletes transmission adaptive value, sets speed limits.

Diagram illustrating advanced ECU coding capabilities, including unlocking hidden features, disabling annoying functions, customizing OE-settings, component matching, and programmable module installation.
IMMO Key Programming (Basic)
Performs anti-theft key matching functions.
- Add new key fobs.
- Disable lost keys.
- Key learning.
- Rewrite keys.
Warm Notice: IMMO features vary by car model and year, mainly works only for low-grade IMMO Vehicles. Please Consider Launch IMMO Plus if you need a professional key fob programming tool. Check compatibility before ordering.

Illustration of IMMO Key Programming features, including adding key fobs, disabling lost keys, key learning, and rewriting keys.
CAN FD/DoIP Protocol Support & FCA AutoAuth
Supports new communication protocols for wider vehicle coverage.
- CAN FD: Compatible with latest GM vehicles (after 2020), offering faster data rates and reduced error risk.
- DoIP: Supports Diagnostics over DoIP for higher data rates, compatible with BMW (F&G chassis), Volvo (2018+), Land Rover & Jaguar (2017+).
- FCA AutoAuth: Allows access to 2018+ FCA vehicles (Fiat, Chrysler, Jeep, Alfa Romeo) with Security Gateway module for diagnostic functions. Requires an FCA account.
- VAG Guided Function: Provides on-screen instructions for Audi, BMW, Skoda, Seat, etc., to guide through diagnostic procedures.

Image detailing CAN-FD and DoIP protocol support, listing compatible GM and Chrysler models and highlighting the need for an adapter for DoIP.

Screenshot showing the FCA AutoAuth login screen on the tablet, indicating support for 2017-2024 Chrysler, Dodge, Jeep, Fiat vehicles.

Illustration of the VAG Guided Function, offering step-by-step instructions for entering guided menus, DTC troubleshooting, matching, calibration, basic settings, and coding new components for VW, Audi, Seat, Skoda.
Supported Car Models
The CRP919E BT supports over 150 car brands and 10,000+ models from 1996-2024.
- American cars: BUICK, CADILLAC, CHEVROLET, CHRYSLER, DODGE, FIAT (BRAZIL), FORD, GM, JEEP, LINCOLN, GM (BRAZIL).
- European cars: ABARTH, ALFA ROMEO, AUDI, BENTLEY, BMW, BUGATTI, CITROEN, DACIA, IZH, EURO FORD, FERRARI, FIAT, GAZ, OPEL (SOUTH AFRICA), IVECO, JAGUAR, LAMBORGHINI, LANCIA, LAND ROVER, MASERATI, MAYBACH, MERCEDES, MINI, OPEL, PEUGEOT, PORSCHE, RENAULT, ROLLS ROYCE, ROVER, SAAB, SEAT, SKODA, SMART, SPRINTER, VAUXHALL, VAZ, VOLVO, VW, ASTON MARTIN, VW_CV.
- Asian cars: ACURA, DAEWOO, DAIHATSU, HOLDEN (AUSTRALIA), HONDA, HYUNDAI, INFINITI, ISUZU, KIA, LEXUS, LUXGEN, MAHINDRA (INDIAN), MARUTI (INDIAN), MAZDA, MITSUBISHI, NISSAN, GTR (NISSAN), PERODUA, SAMSUNG, SSANGYONG, SUBARU, SUZUKI, TATA (INDIAN), TLISUZU, TOYOTA.

Geographic breakdown of supported car brands, including Europe, America, Asia, Australia, and Brazil, covering models from 1996 to 2024.
5. Maintenance (Service Functions)
The CRP919E BT offers 31+ special reset service functions to help vehicles return to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and model.

Visual representation of various reset services, including SRS Reset, Oil Reset, Throttle Adaptation, Brake Reset, BMS Reset, and TPMS Reset.
5.1. Common Reset Functions
- Maintenance Light Reset (Oil Reset): Resets the oil service light and recalculates engine oil life.
- Electronic Parking Brake Reset (BRAKE RESET): Resets brake pads after replacement.
- Steering Angle Reset (SAS Reset): Clears faulty steering angle sensor memories and resets the steering angle.
- ABS Bleeding: Bleeds the brake system to restore ABS brake sensitivity when air is present.
- Crank Position Sensor Adaptive Learning (GEAR LEARN): Performs tooth learning for the car to turn off the MIL.
- Anti-theft Matching (IMMO): Performs anti-theft key matching for immobilizer control systems.
- Injector Coding (INJECTOR): Writes or re-codes injector actual codes for accurate fuel injection control.
- Battery Matching (BAT. RESET): Resets the battery monitoring unit and clears low battery fault information.
- DPF Regeneration (DPF REG.): Clears PM from the DPF filter through continuous combustion oxidation.
- Throttle Matching (ELEC. THROTTLE RLRN): Initializes throttle actuators and returns learned values to default.
- Gearbox Matching (GEARBOX): Completes gearbox self-learning to improve shifting quality.
- Headlight Matching (AFS RESET): Initializes the adaptive headlamp system.
- Sunroof Initialization (SUNROOF): Sets sunroof lock off, rain-closed function, memory function, and temperature threshold.
- Suspension Level Calibration (SUS RESET): Adjusts body height sensor for level calibration.
- EGR Adaption: Learns the EGR valve after cleaning or replacement.
- Seats Calibration: Matches seats with memory function after replacement/repair.
- Tyre Reset: Sets size parameters for modified or replaced tires.
- Coolant Bleed: Activates the electronic water pump before venting the cooling system.
- AdBlue Reset (Diesel Engine Exhaust Gas Filter): Required after replacing or filling diesel exhaust treatment fluid.
- NOx Sensor Reset: Resets catalytic converter learned value after NOx fault re-initialization or catalytic converter replacement.
- AC System Relearn/Initialization: Performed when vehicle AC ECU or actuator is replaced or ECU memory is lost.
- High Voltage Battery Detection (HIGH VOLTAGE BATTERY): Diagnoses and detects status information for high voltage batteries.
- Windows Calibration: Performs door window matching to recover ECU initial memory and automatic ascending/descending function.
- Language Change: Changes system language of the vehicle center console (requires language pack).
- A/F Reset: Sets or learns air/fuel rate parameters.
- Transport Mode: Deactivates transport mode to restore normal vehicle functions (e.g., speed limits, network wake-up, remote key).
- Stop/Start Reset: Opens or closes automatic Start/Stop function via ECU hidden function settings.
- Intelligent Cruise Control System Reset: Matches the intelligent cruise control module after replacement or repair.
- Engine Power Balance Monitoring: Monitors crankshaft acceleration to determine relative power per cylinder.
- Gas Particulate Filter (GPF) Regeneration: Performs GPF replacement or regeneration.
- Motor Angle Calibration: Performs motor angle calibration when rotor position sensor detection differs from actual rotor field position.
5.2. Software Update
This module allows you to update diagnostic software and the application itself.
- Go to Software Update on the Home screen.
- Tap the Downloaded tab to see available updates.
- Select the desired software (Common, Frequently used, or Other vehicle software).
- Tap Update to start downloading and installation.
6. Troubleshooting
6.1. How to save power?
- Turn off the screen when the tool is idle.
- Set a shorter standby time.
- Decrease the brightness of the screen.
- Turn off WLAN if not required.
- Disable GPS function if not in use.
6.2. Communication error with vehicle ECU?
- Confirm the VCI is correctly connected.
- Ensure the ignition switch is ON.
- If issues persist, use the Feedback feature to send vehicle year, make, model, and VIN number for analysis.
6.3. Failed to enter into vehicle ECU system?
- Confirm the vehicle is equipped with the system you are trying to access.
- Confirm the VCI is correctly connected.
- Ensure the ignition switch is ON.
- If issues persist, use the Feedback feature to send vehicle year, make, model, and VIN number for analysis.
6.4. How to download the Diagnostic App after resetting the tablet?
After resetting, ensure network connection and follow these steps:
- Launch the browser and go to www.x431.com.
- Tap Login, enter your username and password, then Log In.
- Confirm the serial number, tap APP application program, and then the Download icon.
- After download, follow on-screen instructions to install.
- Login with existing credentials and go to the update center to download diagnostic software.
6.5. What to do if the language of vehicle diagnostic software does not match the system language?
English is the default system language. After setting your preferred system language, go to the update center to download the corresponding vehicle diagnostic software. If it still displays in English, it indicates that the software for your chosen language is under development.
6.6. How to retrieve the login password?
- Launch the application from the home screen.
- Tap Login on the upper right corner.
- Tap Retrieve password and follow the on-screen instructions.
7. Specifications
7.1. Display Tablet
- Operating system: Android 10.0
- Processor: 2.0GHz, quad core
- Memory: 4GB
- Storage: 64GB
- Display screen: 7-inch, LCD capacitive touch screen
- Resolution: 1024 x 600 pixels
- Camera: Rear-facing 8.0MP
- Connectivity: Wi-Fi (802.11a/b/g/n/ac), Bluetooth
- Working temperature: 0°C ~ 50°C
- Storage temperature: -20°C ~ 70°C
7.2. VCI Connector
- Working voltage: 9 ~ 18V
- Power consumption: ≤ 2.0W
- Dimension: 118.3mm * 69.5mm * 32mm
- Working temperature: 0°C ~ 50°C
- Relative humidity: 20% ~ 90%
8. User Tips
- The LAUNCH X431 CRP919E BT is highly recommended for its speed and originality.
- To conserve battery power, reduce screen brightness and disable Wi-Fi when not in use.
- For IMMO functions, always check vehicle compatibility before attempting operations, as features vary by car model and year.
- If using third-party diagnostic programs like Carista or CarScanner Pro, be aware that compatibility with the vehicle's ECU may vary.
- Ensure the VCI connector is firmly connected and the ignition is on for successful communication with the vehicle's ECU.
9. Warranty & Support
9.1. Warranty Information
LAUNCH® electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery. This warranty is limited to persons who purchase LAUNCH® products for resale or use in the ordinary course of business.
The warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.
Final determination of defects will be made by LAUNCH according to stipulated procedures.
9.2. Customer Service
For any questions regarding the operation of the unit, please contact your seller or the customer service center:
- Tel: 86-755-25938674
- E-mail: DOD@cnlaunch.com