Hyundai 46720G3500RMW

Contents

Hyundai A/T Leather Gear Shift Lever Knob User Manual

Model: 46720G3500RMW

1. Safety Warnings

Please read and understand all safety warnings before installing or operating the gear shift knob.

  1. Always ensure the vehicle is completely stationary before shifting gears. Shifting into Reverse (R) or Neutral (N) while driving is strictly prohibited, as this may cause transmission damage or vehicle loss of control.
  2. Before installing or removing the gear shift knob, turn off the vehicle engine and engage the parking brake (or activate the electronic parking brake for applicable models) to prevent the vehicle from rolling and causing safety accidents.
  3. Do not use excessive force to install, remove, or twist the shift knob, as this may damage the internal shift lock mechanism, wiring harness, or shift boot.
  4. After installation, perform a full gear range test to confirm proper locking and smooth shifting before starting the vehicle.
  5. When children are near or operating the vehicle, ensure the shift knob is in Neutral (N) and the parking brake is engaged to prevent accidental gear shifts.

2. Product Overview

2.1 Product Name

Hyundai Vehicle-Specific Gear Shift Knob

2.2 Application

This gear shift knob is suitable for automatic and manual transmission gear levers of corresponding Hyundai models. Please refer to official specifications for exact model compatibility. It is designed for vehicles with the steering wheel on the left side (Left Hand Drive).

Diagram showing Left Hand (LH) and Right Hand (RH) driving positions
Figure 1: Diagram illustrating Left Hand (LH) and Right Hand (RH) driving positions. This product is compatible with LH drive vehicles.

2.3 Product Structure

  • Grip Body: Crafted from non-slip, wear-resistant material with an ergonomic design for comfortable handling.
  • Function Buttons: For automatic models, integrates a shift lock release button, manual mode switch, and electronic shift unlock button (on select models).
  • Connection Structure: Mechanical knobs use threaded or snap-fit connections; electronic knobs integrate signal contacts and wiring harness connectors.
  • Decorative Components: Features a brand logo and gear position indicators for enhanced aesthetics and visibility.
Front view of the Hyundai A/T Leather Gear Shift Lever Knob
Figure 2: Front view of the gear shift knob, showcasing its ergonomic design and decorative elements.
Bottom view of the gear shift knob, showing the attachment mechanism
Figure 3: Bottom view of the gear shift knob, illustrating the attachment mechanism.

3. Installation & Removal Instructions

3.1 Automatic Transmission (Mechanical Knob)

Removal:

  1. Gently lift the upper edge of the shift boot to expose the knob's base.
  2. Press and hold the shift lock release button.
  3. Rotate the knob counterclockwise (for threaded type) or squeeze the base clips and pull outward (for snap-fit type) to remove it.

Installation:

  1. Ensure the gear lever is in Neutral (N).
  2. Align the new knob with the lever axis.
  3. Press and hold the shift lock release button.
  4. Rotate clockwise until fully tight (threaded type) or push firmly until a "click" is heard (snap-fit type), confirming the clips are fully engaged.

3.2 Automatic Transmission (Electronic Knob)

Removal:

  1. Turn off the vehicle and disconnect the negative battery terminal.
  2. Lift the shift boot and disconnect the wiring harness connector from the back of the knob.
  3. Press the internal release clips and pull the knob straight up to remove it.

Installation:

  1. Align and connect the knob's wiring harness to the vehicle's harness, ensuring the clip locks securely.
  2. Align the knob with the mounting slot and press down firmly until fully seated.
  3. Reconnect the negative battery terminal to restore power.

3.3 Manual Transmission Knob

Removal:

  1. Rotate the old knob counterclockwise with steady force until it detaches from the gear lever threads.
  2. Remove the shift boot retainer ring.

Installation:

  1. Slide the shift boot retainer ring onto the gear lever.
  2. Rotate the new knob clockwise onto the threads and tighten securely.
  3. Adjust the shift boot to fit neatly around the knob's base with no wrinkles.

4. Operation Instructions

4.1 Automatic Transmission Knob

  1. Basic Gear Shifting: Press the shift lock release button to switch between P (Park), R (Reverse), N (Neutral), and D (Drive). The button can be released when shifting from D to N or N to D, as no button is required for these shifts.
  2. Manual Mode Activation: Toggle the knob to the right (or pull backward on select models) to enter M (Manual) mode. Push forward to upshift and pull backward to downshift—no need to press the lock button.
  3. Emergency Unlock: If the vehicle loses power and cannot shift, pry open the emergency unlock cover on the knob, insert a key or specialized tool, and press the unlock button to shift gears.

4.2 Manual Transmission Knob

  1. Grasp the knob firmly and move the gear lever smoothly to engage the desired gear (1-5/6 speed, Reverse). After shifting, confirm the knob returns to the neutral position and the gear is fully engaged.
  2. For Reverse gear, press the lock ring (on select models) before shifting to prevent accidental engagement while driving.

5. Maintenance

  • Avoid contact with oil, sharp objects, or corrosive chemicals, as these may cause material aging, scratches, or button malfunction.
  • Clean the knob with a slightly damp, soft cloth and allow it to air dry before use. Do not rinse or soak the knob in water, especially electronic models, to prevent internal water ingress and short circuits.
  • When parking the vehicle for an extended period, always shift to P (automatic) or N (manual) and engage the parking brake before exiting.

6. Troubleshooting

6.1 Knob is loose or wobbles during shifting

  • Mechanical: Re-tighten the threads or check for broken clips. If clips are damaged, replace the knob.
  • Electronic: Inspect the wiring harness connector for looseness or the mounting slot clips for detachment.

6.2 Shift lock button is stuck or unresponsive

  • Clean dust or debris from the button gaps. If the issue persists, the internal spring may be faulty, requiring knob replacement.

6.3 Electronic knob has no gear response

  • Check the battery power and wiring harness connections. If connections are secure, replace the knob.

6.4 Manual knob cannot be tightened

  • Inspect the gear lever threads for stripping. If stripped, replace the gear lever assembly; otherwise, replace only the knob.

7. Specifications

Attribute Value
Product Type Replacement Parts
High-concerned chemical None
Model Name 46720
Brand Name PJHYK (Compatible with Hyundai)
Origin Mainland China
Item Type Gear Shift Knob

7.1 Package Dimensions & Weight

  • Length: 10 cm
  • Width: 10 cm
  • Height: 5 cm
  • Weight: 0.2 kg

8. User Tips

  • VIN Verification: Always double-check compatibility using your vehicle's Vehicle Identification Number (VIN) with a local dealer or official service website before purchasing or installing. This is crucial to ensure the correct part for your specific model and year.
  • Driving Position: Confirm that the product is suitable for your vehicle's driving position (Left Hand Drive or Right Hand Drive) to avoid installation issues. This product is designed for Left Hand Drive vehicles.
Example of a Vehicle Identification Number (VIN) label
Figure 4: Example of a VIN label, typically found on vehicle documents or near the engine.

9. Warranty & Support

9.1 Warranty Coverage

A 1-year free replacement service is provided for non-human-induced quality issues from the date of purchase. This includes material cracking, button failure, and connection structure defects.

9.2 Warranty Exclusions

The following damages are not covered under warranty:

  • Damage from improper installation.
  • External impact.
  • Contact with corrosive substances.
  • Unauthorized modification or disassembly.

9.3 After-Sales Support

To apply for after-sales support, contact Hyundai's official after-sales channel or authorized dealers. Please provide your purchase receipt, vehicle VIN, and a detailed description of the issue.

10. Product Video

The following video provides a general overview of various car parts, including the gear shift knob. Please note that this video is for illustrative purposes and may not show specific installation steps for this exact model.

Video 1: General showcase of car parts, including the gear shift knob.

11. Additional Resources

A detailed user manual in PDF format is available for download. This document contains comprehensive guides and specifications.

Reference: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.