1. Safety Warnings
- This device is for indoor use only.
- Do not expose this device to dripping or splashing water or any other dangerous sources.
- This device should only be installed by adults.
- Do not install near any heat sources.
- Do not use this device with dimmers.
- Do not use this device in totally enclosed luminaires. Use this device in open luminaires only.
- If this device is much heavier than the one to be replaced, the increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention.
- RISK OF ELECTRIC SHOCK: USE IN DRY LOCATIONS ONLY. Do not install this device with wet hands.
- Always turn off power before wiring.
2. Setup
2.1 Wiring Diagram
Ensure power is off before performing any wiring. Connect the Live (L) and Neutral (N) wires from your AC power source (85V-250V) to the 'Input' terminals. Connect the Live (L) and Neutral (N) wires of your light fixture to the 'Output' terminals.
The module dimensions are approximately 82mm (length) x 42mm (width) x 26mm (height).
2.2 RF Remote Control Pairing
The red indicator light on the smart switch indicates it is in RF pairing mode.
- Latch Mode (Toggle ON/OFF with one button):
- Press the pairing button on the smart switch twice quickly. The red indicator light will flash and then stay on.
- Press the desired button on your RF remote control once. The red indicator light will flash and then turn off, indicating successful pairing.
- Toggle Mode (Press and hold to ON, release to OFF):
- Press the pairing button on the smart switch once. The red indicator light will flash and then stay on.
- Press the desired button on your RF remote control once. The red indicator light will flash and then turn off, indicating successful pairing.
- Jog Mode (One button for ON, another for OFF):
- Press the pairing button on the smart switch three times quickly. The red indicator light will flash and then stay on.
- Press the button on the remote control you want to set for 'ON'. The red indicator light will flash.
- Immediately press the button on the remote control you want to set for 'OFF'. The red indicator light will flash and then turn off, indicating successful pairing.
Note: RF working modes require QIACHIP brand remote controls. Compatibility with other brands is not guaranteed.
2.3 Wi-Fi Connection (Tuya Smart Life App)
The green indicator light on the smart switch indicates it is in Wi-Fi pairing mode.
- Preparation:
- Power on the smart switch.
- Ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
- Enable Bluetooth and location services on your phone.
- Keep the device, phone, and Wi-Fi router close to each other.
- Download and Install App:
- Search for "Smart Life" in your app store (App Store/Google Play) or scan the QR code below to download and install the app.
- Register a new account or log in with an existing one.
Figure 2.4: Scan QR codes to download the Smart Life app for iOS or Android. - Reset Smart Switch for Wi-Fi Pairing:
- Press and hold the pairing button on the smart switch for more than 6 seconds until the green LED indicator flashes quickly.
- Add Device in App:
- Open the "Smart Life" app.
- Tap the "+" icon in the upper right corner to enter the device addition page.
- Select "Auto Scan" (ensure Bluetooth is on). The app will search for nearby devices.
- Once the device is found, its icon and name will appear. Follow the app prompts to add the device, including entering your Wi-Fi password.
- After successful connection, the green indicator light on the smart switch will remain on.
3. Operating Instructions
3.1 Manual Control
Without a remote control, press the setting button on the smart switch once to turn it ON, and press it again to turn it OFF.
3.2 RF Remote Control
Once paired (as described in Section 2.2), use the RF remote control to operate the smart switch according to the configured mode (Latch, Toggle, or Jog).
Video 3.1: Demonstration of RF pairing, clearing, and Wi-Fi/App/Voice control functionality.
3.3 App Control (Tuya Smart Life)
After connecting to Wi-Fi via the Smart Life app:
- View State: The app's home page will display the newly added device. You can see its current ON/OFF status.
- Turn ON/OFF: Tap the device icon in the app to toggle its power state.
- Set Schedule: Use the app to set timers, countdowns, or schedules for automatic operation.
3.4 Voice Control (Alexa & Google Assistant)
To connect to third-party smart speakers like Amazon Alexa or Google Assistant:
- Download the third-party app (e.g., Amazon Alexa app) and register an account.
- Add the smart switch device within the Smart Life app first.
- In the Smart Life app, open the device control page, click the upper right corner (usually a pencil or three dots icon) to access device information.
- Navigate to the 'Third-party Control' section and select the desired platform (Alexa or Google Assistant).
- Follow the on-screen prompts to link your Smart Life account with your Alexa or Google Assistant account.
- Once linked, you can use voice commands (e.g., "Alexa, turn on the light") to control the smart switch.
4. Maintenance
This device requires minimal maintenance. Ensure it is kept in a dry environment and away from heat sources. Regularly check for any loose wiring or signs of damage. For cleaning, use a dry cloth; do not use liquids or abrasive cleaners.
5. Troubleshooting
5.1 Resetting the Smart Switch
To clear all stored RF remote control data and reset the smart switch:
- Press the learning button on the smart switch 8 times quickly.
- The LED on the smart switch will flash 8 times, indicating that all remote control data has been cleared. If the device was set to a specific power-on state, this will also be reset.
5.2 General Wireless Operation Tips
- If the remote control's battery voltage is low, replace the battery promptly. Low battery can reduce the remote control distance.
- When using wireless electronic products, avoid metal obstructions, large electronic devices, electromagnetic fields, and other strong sources of interference. These can reduce the effective range of the remote control or cause operational failures.
- Do not use this electronic product abnormally. Abnormal use can reduce performance and lifespan, and in severe cases, may damage the product and pose safety risks.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | KR2201W Wifi +RF receiver |
| Communication Method | RF, Wi-Fi (IEEE 802.11 b/g/n) |
| Working Frequency | 433.92MHZ + 2.4GHz WIFI |
| Input Voltage | AC 90-250V (50/60Hz) |
| Max Current | 10A |
| Max Output Power (Resistive Load) | 2200W (AC220V) |
| Max Output Power (Incandescent Lamp) | 2200W (AC220V) |
| Max Output Power (Inductive Load) | 500W (AC220V) |
| Max Output Power (Capacitive Load) | 200W (AC220V) |
| Max Output Power (Energy-saving Lamp) | 300W (AC220V) |
| Max Output Power (LED Lamp) | 300W (AC220V) |
| RF Remote Control Distance | Greater than 25 meters (open area) |
| State of Assembly | Almost Ready |
| Compatibility | All Compatible (IOS Android System, Works with Alexa & Nest) |
| Certification | CE |
7. User Tips
- For RF remote controls, consider using rechargeable batteries and a charger for long-term cost savings, as batteries may need replacement when voltage is low.
- When setting up Wi-Fi, ensure your phone's Bluetooth is enabled for faster device discovery via the 'Auto Scan' feature in the Smart Life app.
- Utilize the 'Restart State' setting in the Smart Life app to configure how your device behaves after a power outage (e.g., always off, always on, or remember last state).
8. Warranty and Support
For detailed item guides and documents, including a user manual in PDF format, please refer to the official documentation. You can often find these resources on the product's support page or by contacting the seller directly.
A PDF user manual is available for download: View User Manual (PDF)