LAUNCH X431 I-TPMS

Contents

LAUNCH X431 I-TPMS Car Tire Pressure Diagnostic Tool User Manual

Model: X431 I-TPMS | Brand: LAUNCH

Introduction

The LAUNCH X431 I-TPMS is a professional Tire Pressure Monitoring System (TPMS) service tool designed to assist with various TPMS functions. This manual provides detailed instructions on how to use the device effectively, either with a specific diagnostic tool or a smartphone running the i-TPMS app.

LAUNCH i-TPMS device and sensors
LAUNCH i-TPMS device with four sensors.

Note: Pictures illustrated here are for reference purpose only. Due to continuing improvements, actual product may differ slightly from the product described herein and this User Manual is subject to change without notice.

Safety Precautions

Read all safety warnings and instructions carefully before using the device. Failure to heed these warnings and instructions may result in electric shock, fire, and/or serious injury. Save all safety warnings and instructions for future reference.

  • There are no user serviceable parts. Have the device serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the device is maintained. Disassembling the device will void the warranty.
  • CAUTION: This device contains an internal Lithium Polymer battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, pierce or dispose of the battery in fire or water.
  • This product is not a toy. Do not allow children to play with or near this item.
  • Do not expose the device to rain or wet conditions.
  • Do not place the device on any unstable surface.
  • Never leave the device unattended during the charging process. The device must be placed on a non-flammable surface during charging.
  • Handle the device with care. If the device is dropped, check for breakage and any other conditions that may affect its operation.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
  • Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
  • Keep the device dry, clean, free from oil, water or grease. Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
  • People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemakers could cause pacemaker interference or pacemaker failure.
  • Use the device only with the specific diagnostic tool that comes loaded with the TPMS module and the Android smartphone that is installed with the i-TPMS app.
  • Do not install programmed TPMS sensors in damaged wheels.
  • While programming a sensor, do not place the device close to several sensors at the same time, which may result in programming failure.
  • The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Components & Controls

Diagram of i-TPMS device with numbered components
i-TPMS Device Components
  1. Charging LED: Red means Charging; Green means Fully Charged.
  2. UP Button: Navigates up or increases values.
  3. DOWN Button: Navigates down or decreases values.
  4. Charging Port: For connecting the charging cable.
  5. Sensor Slot: Insert the sensor into this slot to activate and program it.
  6. Display Screen: Shows information and menu options.
  7. POWER Button: Turns the tool on/off.
  8. OK (Confirm) Button: Confirms selections or operations.

Technical Specifications

Feature Specification
Screen 1.77 inch
Input Voltage DC 5V
Item Weight 0.6kg
Item Height 7inch
Item Width 22inch
Item Length 32inch
Working Temperature -10°C ~ 50°C
Storage Temperature -20°C ~ 60°C
External Testing Certification CE
Special Features Bluetooth
Software Version 2025 Version
Hardware Version 2025 Version
Is Batteries Included Yes

Accessories Included

Upon opening the package for the first time, please carefully check the following components. Common accessories are the same, but for different destinations, the accessories may vary. Please consult your seller for specifics.

  • i-TPMS Device
  • i-TPMS Device
    The i-TPMS device.
  • Charging Cable
  • Charging Cable
    USB charging cable for the i-TPMS device.
  • User Manual
  • User Manual booklet
    Printed User Manual.

Setup

1. Charging & Powering On

  1. Plug one end of the charging cable into the charging port of the i-TPMS, and the other end to an external power adaptor (not included).
  2. Connect the power adaptor to an AC outlet.
  3. While charging, the LED illuminates red. Once the LED changes to green, charging is complete.
  4. Press the POWER button to turn on the device. A beep will sound and the screen will light up.

2. Button Operations

  • UP/DOWN Buttons (▲/▼): Switches to different tire positions or navigates menus.
  • POWER Button (ن): Press for about 3 seconds to turn it on/off.
  • Screen On (Short press POWER): Enters hibernate mode.
    • If the device is not charging and there is no operation for 30 minutes, it will automatically power off.
    • If the device is charging and there is no operation for 5 minutes, it will automatically enter hibernate mode to conserve battery power.
  • Screen Off (hibernate) (Short press POWER): Press once to wake it up.
  • OK Button: Press to confirm the current operation.

3. i-TPMS App Download (for Android Smartphone users)

For Android system smartphone users, scan the following QR code or the QR code on the back of the i-TPMS device to download and install the i-TPMS app on your phone.

QR code for i-TPMS Android app
Scan to download the i-TPMS Android app.

4. Getting Started Flow

For initial use, please follow the flow chart below to start using the i-TPMS device with a diagnostic tool or smartphone.

i-TPMS device connected to smartphone app
i-TPMS device connected to a smartphone running the app.
  1. Enter TPMS/i-TPMS on the diagnostic tool/smartphone.
  2. Search for the desired i-TPMS and connect it via Bluetooth.
  3. Select the target region.
  4. Select the vehicle manufacturer.
  5. Select the vehicle model and year.
  6. Select the TPMS function.
  7. Follow on-screen instructions to proceed.

Notes:

  • When scanning for available i-TPMS devices, make sure it has been powered on. After searching, tap it to pair up via Bluetooth. If the firmware version of the i-TPMS is too low, the system will automatically upgrade it.
  • For indirect TPMS vehicles, only the Learning function is supported. For vehicles using Direct TPMS, it generally includes: Activation, Programming, Learning, and Diagnosis. The available TPMS functions may vary for different vehicles and TPMS apps being used.
Video: Unboxing and initial connection of the i-TPMS device.

Operating Instructions

Working Principle

The i-TPMS works by establishing a Bluetooth connection with a compatible diagnostic tool or smartphone. It then communicates wirelessly with the vehicle's TPMS sensors to perform various functions.

Diagram showing i-TPMS working principle
Working principle of the i-TPMS device.

Notes:

  • The diagnostic tool must be a specific scanner loaded with the TPMS module.
  • Due to hardware limitations, the i-TPMS app on the smartphone achieves fewer functions than the TPMS module on the specific diagnostic tool.
  • A stable wireless communication should be established between the i-TPMS and the diagnostic tool or smartphone.

Job Menu (Smartphone App)

This section applies to Android smartphone users utilizing the i-TPMS app. Upon opening the app, the following screen will appear:

Screenshot of i-TPMS smartphone app job menu
i-TPMS smartphone app job menu.
  • A. Display mode switch button: Tap to switch to different display modes.
  • B. Settings button: Tap to enter the settings screen.
  • C. Bluetooth pairing button: Tap to scan for available Bluetooth devices and pair it up. After pairing, a link icon will appear on the screen.
  • D. Function module:
    • Select Vehicle: Tap to select the desired vehicle manufacturer.
    • OE Query: Tap to check the OE number of the sensors.
    • Repair Information: View repair guides, repair cases, operating skills, etc.
    • History Report: Tap to view the historical reports TPMS test report.
    • Choose Car Model Area: Select an area to find the car model you need.

TPMS Operations (Diagnostic Tool)

Here we demonstrate how to perform TPMS operations using a diagnostic tool, as its TPMS module covers all functions available in the i-TPMS smartphone app.

1. Activate Sensor

This function allows users to activate a TPMS sensor to view sensor data such as sensor ID, tire pressure, tire frequency, tire temperature, and battery condition.

TPMS sensor activation process
Activating a TPMS sensor to read data.

Notes:

  • The tool will perform TPMS tests in a sequence of FL (Front Left), FR (Front Right), RR (Rear Right), LR (Rear Left) and SPARE, if the vehicle has the option for the spare. Alternatively, use the ▲/▼ button to move to the desired wheel for testing.
  • For universal sensors, place the i-TPMS alongside the valve stem, point toward the sensor location, and press the OK button. Once the sensor is successfully activated and decoded, the i-TPMS will vibrate slightly and the screen will display the sensor data.
  • For early magnet-activated sensors, place the magnet over the stem and then place the i-TPMS alongside the valve stem.
  • If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate the tire and place the i-TPMS alongside the stem while pressing the OK button.

2. Program Sensor

This function allows users to program sensor data to a specific brand sensor and replace faulty sensors with low battery life or non-functioning ones. There are four programming options:

  • Method 1: Auto Create

    This method programs the sensor by applying random IDs created according to the test vehicle when the original sensor ID cannot be obtained.

    1. Select the wheel to be programmed, insert a sensor into the i-TPMS sensor slot, and tap 'Auto' to create a new random sensor ID.
    2. Tap 'Program' to write the new ID to the sensor.
    Auto Create Sensor ID screen
    Auto Create Sensor ID interface.

    Note: If 'Auto' is selected, a TPMS Relearn operation is required after programming all necessary sensors.

  • Method 2: Manual Create

    This method allows users to manually enter a sensor ID. Users can input a random ID or the original sensor ID if available.

    1. Select the wheel, insert a sensor into the i-TPMS sensor slot, and tap 'Manual'.
    2. Use the on-screen virtual keypad to input a random or original (if available) sensor ID and tap 'OK'.
    3. Follow on-screen prompts to write the sensor ID to the sensor.
    Manual Create Sensor ID screen
    Manual Create Sensor ID interface.

    Notes:

    • Do not enter the same ID for each sensor.
    • If a random ID is entered, perform the TPMS Relearn function after programming. If the original ID is entered, no Relearn function is needed.
    • If a vehicle does not support the 'Learn' function, select 'Manual' to enter the original sensor ID manually, or trigger the original sensor at the activation screen to get its information, before programming the sensor.
  • Method 3: Copy By Activation

    This method writes retrieved original sensor data to a specific brand sensor, used after the original sensor is triggered.

    1. From the activation screen, select the specific wheel position and trigger the original sensor. The retrieved information will be displayed.
    2. Insert a sensor into the i-TPMS sensor slot, and tap 'Copy by activation'.
    3. Tap 'Program' to write the copied sensor data to the sensor.

    Note: Once programmed with 'Copy', the sensor can be installed directly in the wheel, and the TPMS warning light will turn off.

  • Method 4: Copy By OBD

    This method writes saved sensor information to the LAUNCH sensor after performing 'Read ECU ID'. This requires a connection with the vehicle's DLC port.

    1. Connect the tool to the vehicle's DLC port, tap 'Read ECU ID' to read sensor IDs and positions.
    2. Insert a new sensor into the i-TPMS sensor slot, select the desired wheel position, and tap 'Copy by OBD'.
    3. Tap 'Program' to write the copied sensor data to the sensor.

3. Relearning (Only available on diagnostic tool)

This function writes newly programmed sensor IDs into the vehicle's ECU for sensor recognition. Relearn operation is only necessary when the newly programmed sensor IDs differ from the original sensor IDs stored in the vehicle's ECU.

TPMS Activation Relearn Programming Diagnostic flow chart
Flowchart for TPMS Activation, Relearn, Programming, and Diagnostic functions.

There are three ways available for Relearn:

  • Method 1: Static Learning

    Requires the vehicle to be put into learning/retraining mode. Follow on-screen prompts to complete.

  • Method 2: Self-Learning

    For some vehicles, the learning function can be completed by driving. Refer to the on-screen learning steps.

  • Method 3: Relearn by OBD

    This function writes sensor IDs to the TPMS module. First, activate all sensors, then use the diagnostic tool with the included VCI to complete learning steps following on-screen instructions.

Read and Clear Fault Codes for TPMS System
Process for reading and clearing TPMS fault codes.

Maintenance

  • Keep the device dry, clean, free from oil, water or grease.
  • Use a mild detergent on a clean cloth to clean the outside of the device when necessary.
  • Store the device in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

  • Q: Why does my i-TPMS always stay on the welcome screen?

    A: If the device keeps displaying the welcome screen, it indicates that it is not in TPMS function mode. If the diagnostic tool is performing the TPMS function, the device will switch to the corresponding function mode.

  • Q: Can I set the system language of my i-TPMS?

    A: It varies with the system language of the diagnostic tool/smartphone that connects it. Currently, only English and simplified Chinese are available on the device. If the device detects the system language of the diagnostic tool/smartphone is non-Chinese, it will change into English automatically, regardless of the language setting on the diagnostic tool/smartphone.

  • Q: My i-TPMS does not respond.

    A: In this case, please carefully check the following:

    • Whether the device is successfully connected to the diagnostic tool/smartphone wirelessly.
    • Whether the device is powered on.
    • Whether the device is damaged or defective.
  • Q: Why does my i-TPMS automatically power off?

    A: Please check the following:

    • Whether the device is fully discharged.
    • If the device is not being charged and there is no operation on the device for 30 minutes, it will automatically power off to conserve battery power.
  • Q: My i-TPMS cannot trigger a sensor.

    A: Please check the following:

    • Whether the device is damaged or defective.
    • Whether the sensor, module, or ECU itself may be damaged or defective.
    • The vehicle does not have a sensor even though a metal valve stem is present. Be aware of Schrader rubber style snap-in stems used on TPMS systems.
    • Your device may require a firmware upgrade.
  • Q: What to do if my i-TPMS encountered some unexpected bugs?

    A: In this case, a firmware upgrade is required. On the TPMS version selection screen, tap 'Firmware Update' to upgrade it.

User Tips

  • Upon first connection, the device may require a firmware update. Ensure the device is charged and connected to a compatible LAUNCH scanner or smartphone app for the update.
  • Sensors can be programmed even after they are installed in the wheels, which can save time during installation.
  • The i-TPMS tool is compatible with both original equipment (OE) sensors and LAUNCH-branded sensors for activation and programming.
  • The device accurately reads tire pressure (PSI) and displays other sensor data clearly on its screen or the connected app.
  • If you cannot find a specific car brand in the application for sensor type selection during programming, try selecting the sensor type from the general list (OE Query) using its catalog number.
  • If the device is not responding or connecting via Bluetooth, ensure it is powered on and fully charged. If issues persist, check for available firmware updates.

Warranty & Support

The LAUNCH X431 I-TPMS comes with a 1-Year Warranty from the date of purchase.

For further assistance or detailed instructions, a comprehensive user manual in PDF format is available. You can access it here: User Manual (PDF).

For technical support, please contact your local LAUNCH distributor or the official LAUNCH support channels.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.