Introduction
Thank you for choosing the ZOHAN EM-033 Electronic Bluetooth 5.0 DAB/FM Radio Earmuffs. This device is designed to provide professional hearing protection while allowing you to enjoy digital DAB+, FM radio, and Bluetooth audio. It features a robust noise reduction rating, comfortable design, and a rechargeable battery for extended use. Please read this manual thoroughly before using the product to ensure proper operation and safety.

Figure 1: ZOHAN EM-033 Electronic Bluetooth Earmuffs
Key Features
- Digital DAB+ and FM Radio: Automatically scans and presets up to 30 channels.
- Bluetooth 5.0 Connectivity: Seamlessly connect to audio devices for music and calls.
- Built-in Microphone: Allows for direct communication during calls.
- LCD Display: Shows time, Bluetooth status, FM/DAB channel, and battery status.
- Noise Reduction Rating (NRR): 25dB, Signal-to-Noise Ratio (SNR): 31dB.
- Comfortable Design: Premium padded headband, soft foam ear cushions, and adjustable headband for various head sizes.
- Rechargeable Lithium-ion Battery: 2000 mAh capacity for extended use (up to 36 hours Bluetooth, up to 120 hours wired).
- Deep Bass & Truly Stereo & Big Sound: Enhanced audio experience.
- Snap-in Design: Allows for easy maintenance and replacement of ear pads.

Figure 2: Key features including DAB+, Bluetooth, SNR, and rechargeable battery.

Figure 3: Detailed view of noise reduction, adjustable headband, controls, and soft foam ear pads.
Package Contents
The package includes the following items:
- ZOHAN EM-033 Bluetooth Earmuffs with FM/AM Radio (1 unit)
- Synthetic Leather Bag (1 unit)
- 2000mAh Lithium-ion Battery (1 unit)
- USB Type-C Charging Cable (1 unit)
- 3.5mm Audio Cable (1 unit)
- User Manual (1 unit)

Figure 4: All items included in the retail packaging.
Setup
Wearing Instructions
Follow these steps to properly wear your earmuffs for optimal comfort and noise reduction:
- Pull the earcups apart to widen the headband.
- Place the earmuffs over your head, ensuring both ears are securely covered by the earcups.
- Adjust the earcup position by extending or retracting the headband to achieve a snug and comfortable fit around your head and ears.

Figure 5: Earmuffs in use during various activities like mowing and carpentry.
Battery Installation and Charging
The EM-033 earmuffs include a non-detachable rechargeable lithium polymer battery. To charge the device, connect the provided Type-C charging cable to the Type-C interface on the earmuffs and a suitable power source.

Figure 6: Information on rechargeable battery and estimated usage times (up to 36 hours Bluetooth, up to 120 hours wired).
Operating Instructions
Controls Overview
The main controls are conveniently located on the earcups:

Figure 7: Front view of the earmuffs showing the LCD display and control buttons.
- Power Button: Press and hold for 3 seconds to turn ON. Press and hold for 5 seconds to turn OFF. Quick press to switch between BT/FM/AM modes.
- Tuning Buttons (◄ / ►): Press and hold for 3 seconds for automatic station search. Quick press for manual tuning.
- Memory Button (M): Use to select a favorite channel. Long press and hold until the display flashes to add the current channel to presets. Quick press ◄ or ► to select the channel, then press M again to save. Quick press M to switch between saved channels.
- Volume Control Knob: Adjusts the audio volume.
- AUX Jack: Connects to external audio devices (MP3, iPod) using the provided 3.5mm audio cable. The LCD display will show "AUX".
- Radio Reception: Ensure the antenna is positioned correctly as shown in diagrams; do not bend the aerial.
- Digital Display: Shows the current FM/AM channel, time, Bluetooth status, and battery status.
Bluetooth Operation
- Searching for BT Model: After powering on, short press the Power button to search for the BT model '----'.
- Bluetooth Pairing: Open Bluetooth settings on your phone or MP3 player. Ensure Bluetooth is enabled and select 'EM033' to connect. Once successfully paired, 'ON' will appear on the LCD display. The device will automatically re-connect to the last paired device if it has been previously paired.
- Call Handling:
- Answer/End Call: Short press the Power button.
- Mute Microphone: Double-click the Power button. Repeat to unmute.
- Reject Call: Press and hold the Power button for 3 seconds.
- Recall: Press and hold the Power button for 3 seconds. To cancel recall, press and hold for 3 seconds again.
- Music Playback:
- Next Music: Short press ►.
- Last Music: Short press ◄.
- Pause Music: Short press the Power button.
Maintenance
General Care
- Inspect the earmuffs regularly for serviceability. Ear-muffs, and in particular cushions, may deteriorate with use and should be examined at frequent intervals for cracking and leakage, for example at the start of every work shift.
- Clean and disinfect the cups, cushions, and inserts with mild soap and water only. Do not immerse the ear-muffs in water.
- After use, moisture may accumulate inside the ear cups. To avoid moisture damage to electronic components, the acoustic foam must be removed regularly, and the ear cups' contents allowed to dry. To remove, reach inside the ear cup cushion and pull out the acoustic foam. CAUTION! Do not touch the electronics board or cables! Reinstall the acoustic foam by placing it in the ear cup to completely cover the electronics once dry.
- Do not expose the headset to direct sunlight or high temperatures.
- Store your headset in a clean and dry location, before and after use.
Replacing Ear Pads
The cushions and inserts are replaceable. Always replace worn or damaged parts using hygiene kits from ZH.
- Take out the earmuff.
- Pull apart the broken ear cushion.
- Take off the broken ear cushion.
- Find the buckle and put the new ear cushion on.
- Perfectly snap in the ear cushion.

Figure 8: Visual guide for replacing ear pads.
Troubleshooting
If you encounter issues with your earmuffs, consider the following:
- No Power: Ensure the battery is charged. Press and hold the power button for 3 seconds to turn on.
- No Audio/Poor Sound Quality: Check volume levels. Ensure Bluetooth is properly paired or the AUX cable is securely connected. If using radio, extend the antenna and ensure it's not bent.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on your device and the earmuffs are in pairing mode. Try re-pairing the device.
- Distortion or Failure: If distortion or failure is detected, refer to the manufacturer's advice for maintenance and replacement of batteries. Performance may deteriorate with battery usage.
- Earmuffs move or fall off: Reposition the earmuffs to ensure a secure fit for effective noise reduction.
Specifications
Attenuation Data
| SNR | H | M | L |
|---|---|---|---|
| 31dB | 35dB | 28dB | 21dB |
| Frequency (Hz) | 125 | 250 | 500 | 1000 | 2000 | 4000 | 8000 |
|---|---|---|---|---|---|---|---|
| MFAS | 18 | 19.6 | 29 | 34.4 | 34.7 | 43.1 | 41.9 |
| STD.DEV. | 3.1 | 1.7 | 2.7 | 3.2 | 2.3 | 3.6 | 3.9 |
| MEAN-SD | 14.9 | 17.9 | 26.2 | 31.2 | 32.4 | 39.6 | 38.0 |
Materials
| Part | Materials | Part | Materials |
|---|---|---|---|
| Cup | ABS | Attention foam (inserts) | Polyurethane, PVC |
| Cover | ABS | Cushions | Polyurethane |
| Headband | Acetal | Button | TPE |
Certifications
- The product meets the Basic Safety Requirements of the European Community regulations.
- Notified Body No: 2834
- Notified Body: CCOS Certification Service Limited, Address: Block 1 Blanchardstown Corporate Park Ballycoolin Road, Blanchardstown, Dublin 15 D15 AKK1, Dublin, Ireland
- Standards: EN352-1:2020, EN352-6:2020, EN352-8:2020

Figure 9: Earmuffs displaying CE EN352 and ANSI certifications.
User Tips
- For optimal radio reception, ensure the antenna is fully extended and positioned correctly.
- To maximize battery life, turn off the earmuffs when not in use and avoid prolonged exposure to high temperatures.
- Regularly check the ear cushions for wear and tear to maintain effective noise reduction and comfort.
Safety Warnings
- This product contains small parts that may present a choking hazard. Not for children under 3 years.
- Do not listen at high volume levels for long periods, as this can cause hearing damage.
- Hearing protectors can block external sounds such as warning calls, alarms, and other important signals. Pay special attention to your surroundings when wearing hearing protectors.
- These earmuffs contain batteries and electrical components that may cause ignition in flammable or explosive atmospheres. DO NOT use in environments where sparks may cause a fire or explosion. Misuse can result in injury or death.
- DO NOT use the radio while driving an automobile or bike, as this could block surrounding sounds and increase the risk of an accident.
- In noisy environments, the ear-muffs must be worn in the working position at all times to ensure proper hearing protection.
- The fitting of hygiene covers to the cushions may affect the acoustic performance of the earmuffs.
- Do not insert any foreign body into your headset, as this could seriously damage it.
- Do not allow any liquid to enter your headset, as this would damage the components. In case of immersion or prolonged heavy rain, have the electronics checked by a professional.
- This product may be adversely affected by certain chemical substances. Do not use detergents.
- Inspect your headset regularly to verify that it remains operational. Do not use if it is damaged. Have it checked and repaired by a professional.
- Be careful in a wooded environment, as the earmuffs may get caught on branches. Reposition if they move to maintain effectiveness.
- The audibility of warning signals at a specific workplace may be impaired while using the entertainment facility. These versions limit the entertainment audio signal to 82 dB(A) effective at the ear.
- Dispose of the product and batteries in accordance with national and local regulations.
Warranty and Support
If any unauthorized repair or modification has been carried out on the device, the warranty is no longer valid.
Manufacturer Details
- Manufacturer: Hangzhou ZH Tech Co., Ltd.
- Address: No.6, ShunLe Road, Yuhang, Hangzhou, P.R. China
- Email: support@proheartac.com
EU Declaration of Conformity: www.zhsafetech.com