1. Introduction
This manual provides essential information for the safe and effective installation and operation of your RACBOX Hella 5 D2S D1S Bi-Xenon Projector Lenses. These lenses are designed for retrofitting and upgrading automotive lighting systems, supporting D1S, D2S, D3S, and D4S HID bulbs. Please read all instructions carefully before use.
2. Safety & Warnings
Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Product Overview
The RACBOX Hella 5 Bi-Xenon Projector Lens is engineered for superior light output and durability. It features high-clear glass for a bright and clear light beam, a metal reflective cup for optimal optical design, and a high-quality anti-seize motor for reliable high/low beam switching.
4. Specifications
| Attribute | Value |
|---|---|
| Model Name | 3.0 inch Hella 5 projector lens |
| Socket Type | D2S |
| Brand Name | RACBOX |
| Item Type | Lens, Headlights, HID projector lens |
| Origin | Mainland China |
| Xenon Light Type | D1/D2/D3/D4 Xenon |
| Projector Lens Change | Car Accessories |
| Projector Lens Headlight | Projector Lens Assembly |
| Lens size | 3.0 Inch |
| Projector Lens Headlight Retrofit | Projector Lens HID |
| Light Source | Xenon Bixenon |
| DIY Projector Lens Kit | HID Projector Lens Kit |
| Voltage | 12V |
| Projector Lens Bi-xenon | Projector Lens Kit |
| RHD (Right Hand Drive) | Available |
| LHD (Left Hand Drive) | Available |
| Feature | High beam and low beam |
| Package Weight | 1.02 kg |
| Package Dimensions (L x W x H) | 10 cm x 10 cm x 10 cm |
5. Setup & Installation
This product is an auxiliary accessory for automotive lighting and is intended for normal replacement and upgrade of original car lights. Professional installation is recommended.
- Turn off the vehicle engine and disconnect the power supply to avoid short circuit.
- Locate the mounting position of the original projector lens or accessories.
- Remove the fixing screws or clips that hold the stock projector lens assembly or accessories.
- Unplug the power connector and take off the original projector lens or accessories.
- Install the new projector lens or accessories into the mounting position.
- Secure the light assembly with screws or clips to ensure stable installation.
6. Operating Instructions
- Connect the power plug correctly. If the light does not work, reverse the plug polarity.
- Test all light functions (low beam, high beam) to ensure normal operation.
- Recheck all screws and connections to make sure they are firm and reliable.
7. Troubleshooting
- Light not working after installation: Ensure the power plug is connected with correct polarity. If not, reverse the plug polarity. Check all wiring connections for looseness.
- Incompatible with vehicle: Verify that the projector lens model and bulb type (D1S/D2S/D3S/D4S) are compatible with your specific vehicle's make, model, and year. Consult your vehicle's manual or a professional if unsure.
- Poor light output: Ensure the HID bulbs are correctly seated and functioning. Check for any obstructions in the projector lens or headlight assembly.
8. User Tips
- These projector lenses are versatile and can be used for various HID, Headlamp, and DIY car lighting projects.
- Always double-check vehicle compatibility before purchasing and attempting installation to avoid issues.
- Consider professional installation for complex retrofits to ensure optimal performance and safety.
9. Maintenance
- Regularly inspect the projector lenses and headlight assembly for dirt, dust, or moisture accumulation. Clean with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents that could damage the lens surface.
- Periodically check all electrical connections for corrosion or looseness.
- Ensure the headlight housing seals are intact to prevent water ingress.
10. Warranty & Support
This product has undergone strict quality testing and meets relevant national automotive lighting industry standards.
Manufacturer Information:
Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, China
Email: tdlaccount@126.com
EU Authorized Representative:
APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND
Email: info@apex-ce.com
For further details and comprehensive instructions, please refer to the official user manual PDF: View User Manual (PDF)