BRZHIFI 80W 80VA Linear Power Supply

Contents

BRZHIFI 80W 80VA HIFI Ultra-low Noise Linear Power Supply

User Instruction Manual

1. Introduction

This BRZHIFI 80VA high-fidelity linear power supply features an ultra-low noise design, making it ideal for upgrading audio devices, digital equipment, NAS hard drive enclosures, routers, optical modems, set-top boxes, laptops, and other electronic devices. It is built with overcurrent and short-circuit protection to ensure safe and reliable operation.

The linear power supply provides a pure DC output with very low ripple, contributing to a cleaner background for sensitive electronic components. It is designed for wide application in various HIFI and digital setups.

2. Setup Instructions

2.1. Unpacking

Carefully unpack the contents of the box. Ensure all items listed below are present:

  • 1 x BRZHIFI 80VA Linear Power Supply Unit
  • 1 x DC Output Cable (5.5*2.1mm plug, center positive)
  • 1 x AC Power Cable

2.2. Voltage Confirmation

Before connecting any devices, it is crucial to verify the voltage settings:

  1. Input Voltage: The unit supports AC 110V or 220V. Ensure the power supply is configured for your local mains voltage. This is typically specified at the time of order.
  2. Output Voltage: Confirm that the output voltage of your power supply (e.g., 5V, 9V, 12V, 15V, 24V) matches the voltage requirements of the device you intend to power. Using an incorrect voltage can damage your device.

2.3. Connecting Devices

  1. DC Output Connection: Attach the supplied DC output cable to the DC-OUT port on the rear of the power supply. Connect the other end of the DC cable to your device's power input jack. Ensure the polarity is correct (center positive, 5.5*2.1mm).
  2. AC Power Connection: Insert the AC power cable into the AC input socket on the rear of the power supply. Plug the other end into a suitable wall outlet.
Rear view of BRZHIFI Linear Power Supply showing AC input and DC output ports

Figure 1: Rear panel showing AC input and DC output connections.

Internal view of BRZHIFI Linear Power Supply showing transformer, circuit board, and wiring

Figure 2: Internal view of the power supply, illustrating component layout and wiring.

3. Operating Instructions

3.1. Powering On/Off

Once all connections are secure, locate the toggle switch on the front panel. Flip the switch to the 'ON' position to power on the unit. The front panel display (if present) will illuminate, and the 'POWER' indicator LED will light up. To power off, flip the switch to the 'OFF' position.

Front panel of BRZHIFI Linear Power Supply with ON/OFF switch and digital display

Figure 3: Front panel with power switch and digital voltage display.

3.2. Single Device Operation

For powering a single device, simply connect it as described in the setup section and power on the unit. The power supply will deliver stable DC power to your connected device.

3.3. Multiple Device Operation

This power supply features two DC output ports, allowing you to power two devices simultaneously. Ensure that the total power consumption of both connected devices does not exceed the rated power of 80VA to prevent overheating or damage to the power supply.

4. Maintenance

4.1. Cleaning

To clean the exterior of the power supply, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the finish or internal components.

4.2. Environmental Conditions

To ensure optimal performance and longevity, avoid using the power supply in humid, dusty, or high-temperature environments. Ensure adequate ventilation around the unit.

5. Troubleshooting

5.1. No Power / Unit Not Turning On

  • Check if the AC power cable is securely connected to both the power supply and the wall outlet.
  • Ensure the wall outlet is functional.
  • Verify that the front panel power switch is in the 'ON' position.

5.2. Connected Device Not Working

  • Confirm that the DC output cable is securely connected to both the power supply and your device.
  • Double-check that the output voltage of the power supply matches the voltage requirement of your device.
  • Ensure the DC cable polarity (center positive) is correct for your device.
  • Verify that your device itself is functioning correctly.

5.3. Overheating

  • Ensure the total power consumption of connected devices does not exceed the rated 80VA.
  • Provide adequate ventilation around the power supply unit. Do not cover ventilation slots.

5.4. Protection Circuit Triggered

The power supply is equipped with overcurrent and short-circuit protection. If the unit suddenly stops providing power, it might be due to one of these protections being triggered. Disconnect all devices, power off the unit, wait a few minutes, and then power it back on. If the issue persists, check for short circuits in your connected devices or cables.

6. Specifications

Parameter Value
Product Name80VA Ultra-low Noise Linear Regulated Power Supply
Rated Power80VA
Input VoltageAC 110V / 220V (selectable)
Output TypeDC Regulated
Output Voltage (Selectable)5V, 6V, 7V, 8V, 9V, 10V, 11V, 12V, 13V, 14V, 15V, 16V-24V
Output Current (at 12V)6.5A (max)
Output Connector2 x ports (5.5×2.1mm, center positive)
ConnectionPlug In
UseSwitching
Voltage RangeHigh voltage (50-1000V DC, 75-1000V AC)
Dimensions (L×W×H)130mm × 55mm × 250mm
Net Weight3kg

7. User Tips

  • Always confirm the required voltage and current of your device before connecting it to the power supply.
  • For optimal audio performance, ensure all audio cables are of good quality and properly shielded.
  • Keep the power supply away from sources of strong electromagnetic interference.
  • If you notice any unusual behavior (e.g., excessive heat, strange noises), disconnect the power supply immediately and contact support.

8. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Please refer to your purchase documentation for specific warranty terms and contact information.

A detailed user manual in PDF format may also be available from the seller for further reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.