Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your AUXITO T10 W5W Car LED Bulbs. These bulbs are designed to replace original halogen bulbs, offering high brightness, energy efficiency, and a shock-resistant design. They enhance illumination and warning effects, fitting most vehicle models' corresponding light positions. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: AUXITO LED Light Bulbs and packaging, showing a set of 10 T10 W5W LED bulbs.
Safety & Warnings
Please observe the following safety warnings:
- CHOKING HAZARD: Small parts. Not for children under 3 years.
- Voltage: Exclusively for DC12V vehicle electrical systems. Never connect to 24V power sources to prevent LED burnout.
- Handling: Handle with bare hands during installation; do not touch LED chips with sharp objects to prevent damage.
- High Temperature: Avoid touching the lamp body after illumination to prevent burns from high temperatures.
- Modification: Do not disassemble the lamp body; doing so will void the warranty.
- Compatibility: For turn signal/brake light models, ensure LED power compatibility to prevent flickering or failure.
Product Specifications
| Feature | Specification |
|---|---|
| Model Name | T10 W5W LED Auto Lamp |
| Interface Type | T10 (W5W/194) |
| Rated Voltage | DC12V |
| Lumens | 400Lm |
| Wattage | 2W |
| Current | 0.18A |
| Light Source | 14Pcs 2835 SMD |
| Color Temperature | 6000K (White) |
| Item Weight | 35g (for 10 pieces) |
| Dimensions | 26mm (Length) x 12mm (Width) |
| Features | Canbus Error Free (for 95% vehicles), Built-in Intelligent IC driver, Low power consumption, High brightness |
Image: Diagram illustrating the Super Bright 2835 LED Chipset with specifications like 14pcs 2835 SMD, 9-18V DC, low consumption, and high brightness.
Image: Diagram showing the Canbus Error Free feature with a built-in intelligent IC driver, ensuring constant current and no error for 95% of vehicles.
Setup & Installation
These LED bulbs are designed for direct plug-in installation with no modification required. Follow these steps:
- Prepare Vehicle: Before installation, turn off the vehicle power and remove the key to prevent short circuits.
- Locate Socket: Locate the original bulb socket. Pinch the socket and twist to remove the original bulb, or pull it straight out.
- Insert LED Bulb: Align the new LED bulb with the socket and insert fully. Gently shake to confirm secure seating.
- Test Illumination: Turn on power to test illumination.
- Adjust Polarity (if needed): If the light fails to illuminate, remove the bulb, reverse its orientation (swap polarity) and reinsert. Ensure secure seating before replacing the socket cover.
Image: Easy Installation diagram showing the LED bulb dimensions (26mm length, 12mm width) and a note to flip the bulb 180° if it doesn't light up after installation (reverse polarity).
Operating Instructions
The AUXITO T10 W5W LED bulbs replace original halogen bulbs, providing enhanced illumination and warning effects. They are compatible with most vehicle models' corresponding light positions. Once installed, the bulbs operate automatically with your vehicle's lighting system.
Wide Applications
These bulbs are suitable for various interior and exterior lighting applications, including:
- Dome light
- Glove box light
- Door light
- License plate light
- Trunk light
- General interior lighting
Image: Diagram showing wide applications for the T10 W5W bulb, including dome light, glove box light, door light, license plate light, trunk light, and interior light. Note: Application varies by vehicle; confirm original lamp socket before ordering.
Image: Visual comparison demonstrating the brighter, whiter light output of AUXITO LED bulbs compared to traditional halogen bulbs in a vehicle interior.
Maintenance
AUXITO T10 W5W LED bulbs are designed for long-lasting performance and require minimal maintenance. Keep the following in mind:
- Cleaning: If necessary, gently wipe the bulb's surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Inspection: Periodically check the bulbs for any signs of damage or loose connections.
- Replacement: If a bulb fails, replace it with another AUXITO T10 W5W LED bulb to ensure consistent performance and compatibility.
Troubleshooting
If you encounter issues with your AUXITO T10 W5W LED bulbs, consider the following:
Common Issues and Solutions:
- Bulb does not light up after installation:
- Ensure the vehicle power is on.
- Remove the bulb, reverse its orientation (swap polarity), and reinsert it firmly into the socket.
- Check the vehicle's fuse box for any blown fuses related to the lighting circuit.
- Canbus Problem (flickering, error warning):
Some vehicles equipped with a Canbus system may experience flickering or error warnings. This is because the LED bulbs draw less power than traditional halogen bulbs, which the Canbus system interprets as a fault. In such cases, you may need to connect suitable decoders (load resistors) to resolve the Canbus problems. If decoders do not work, a full refund may be applicable under warranty conditions.
- Installation Problem (limited installation space):
Some vehicles may have limited installation space, making it difficult to install the bulbs. Please confirm your original lamp socket and available space before ordering.
User Tips
- Vehicle Compatibility: While these bulbs are designed for wide application, always confirm your vehicle's original lamp socket type (T10 W5W 194 168 501 2825 etc.) before purchasing to ensure a perfect fit. For specific models like Peugeot 207, users have successfully installed these, but verifying your specific socket is always recommended.
- Polarity Check: Remember the polarity flip step during installation. It's a common reason for initial non-illumination.
Warranty & Support
This product is manufactured by SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD.
EU Authorized Representative:
APEX CE SPECIALISTS LIMITEDGrafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wells Yan
Email: Info@apex-ce.com
Postal code: 40237
Tel: +49 21312066043
Warranty Exclusions: The following conditions are beyond the scope of warranty:
- Canbus problems not resolved by suitable decoders.
- Installation problems due to limited installation space.
- Damages due to irresistible natural disasters like earthquake, flood, etc.
For further details and comprehensive information, please refer to the official user manual PDF available at: User Manual (PDF).
Compliance Information: This product complies with EC, CE, and RoHS standards. It is MADE IN CHINA. For proper disposal, please follow local recycling guidelines for electrical and electronic equipment.