QIACHIP KR2202

Contents

QIACHIP KR2202 2-Channel RF Remote Control Switch and Receiver User Manual

Model: KR2202

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your QIACHIP KR2202 2-Channel RF Remote Control Switch and Receiver. This versatile device is designed for controlling various applications such as lighting, electric doors, automated curtains, and other universal switching needs. It operates on a 433 MHz RF frequency and supports EV1527 encoding format.

QIACHIP 433 MHz RF Remote Control Switch and Receiver Kit with three remote controls.

Image: QIACHIP 433 MHz RF Remote Control Switch and Receiver Kit with three remote controls.

2. Specifications

AttributeValue
Model NumberKR2202
Brand NameQIACHIP
Wireless CommunicationRF
RF Frequency433 MHz / 433.92MHz
Input VoltageAC 85V-220V
Working Current10A
Maximum Load Power1100W x 2
Channels2
Standby Current8.5mA
Receiver Sensitivity-108dBM
Operation ModesMomentary, Toggle, Latching Time delay
Match WayLearning button
Support Encoding FormatEV1527
Output Wiring MethodNC COM NO
Working Temperature-10 ~ +70°C
Size68*48*18 (mm)
Support APPNo
CertificationCE

3. Setup and Installation

Important Safety Note: Please ensure the power is disconnected before performing any wiring to prevent electric shock or damage to the device.

3.1 Receiver Board Overview

Detailed view of the KR2202 receiver board showing pin labels for NC, COM, NO, and the learning button.

Image: Detailed view of the KR2202 receiver board showing pin labels for NC, COM, NO, and the learning button.

The receiver board features the following key components and connections:

  • Antenna: For receiving RF signals from the remote control.
  • Indicator Light: Provides visual feedback during operation and mode setting.
  • Learning Button: Used to pair remote controls and set working modes.
  • Wiring Terminals:
    • NC (Normally Closed): Pins 1 and 4
    • NO (Normally Open): Pins 3 and 6
    • COM (Common/Public Port): Pins 2 and 5

3.2 Wiring Diagrams

The KR2202 receiver supports both AC and DC devices, including motors and lights. Always ensure power is off during wiring.

3.2.1 AC Motor Wiring

Wiring diagram for connecting an AC motor to the KR2202 receiver.

Image: Wiring diagram for connecting an AC motor to the KR2202 receiver. Ensure power is off during installation.

3.2.2 DC Motor Wiring

Wiring diagram for connecting a DC motor to the KR2202 receiver.

Image: Wiring diagram for connecting a DC motor to the KR2202 receiver.

3.2.3 AC and DC Device (Light) Wiring

Wiring diagrams for connecting AC and DC lighting devices to the KR2202 receiver.

Image: Wiring diagrams for connecting AC and DC lighting devices to the KR2202 receiver.

4. Operating Modes and Pairing

The KR2202 receiver supports three working modes: Momentary, Toggle, and Latching. Before setting a mode, you may need to clear existing codes.

Video: Demonstration of the QIACHIP KR2202 RF remote control switch and receiver in operation, showing different modes.

4.1 Clearing the Code (Reset)

To clear all matched remote controls from the receiver's memory:

  1. Press the receiver's learning button 8 times.
  2. The receiver will clear all remote control data in its memory.
  3. The receiver's LED 2 will flash, indicating that the reset function is complete. After reset, no remote control can operate the receiver until new codes are learned.

4.2 Setting Momentary Mode

In Momentary mode, the output is active only while the remote button is pressed. Releasing the button deactivates the output.

  1. Press the receiver's learning button once.
  2. Wait for the LED on the receiver to light off and enter the setting state.
  3. Press button A on the remote control once. The LED on the receiver will flash and then turn off.
  4. Immediately after, press button B on the same remote control. The indicator will flash and then light up. Momentary mode is now set successfully.

4.3 Setting Toggle Mode

In Toggle mode, pressing the remote button once activates the output, and pressing it again deactivates it.

  1. Press the receiver's learning button twice.
  2. Wait for the LED on the receiver to light off and enter the setting state.
  3. Press button A on the remote control twice quickly. The LED on the receiver will flash and then turn off.
  4. Immediately after, press button B on the same remote control twice quickly. The indicator will flash and then light up. Toggle mode is now set successfully.

4.4 Setting Latching Mode

In Latching mode, one button activates the output, and another button deactivates it.

  1. Press the receiver's learning button 3 times.
  2. Wait for the LED on the receiver to light off and enter the setting state.
  3. Press button A on the remote control once. The LED on the receiver will flash and then turn off.
  4. Immediately after, press button B on the same remote control. The indicator will flash and then light up. Latching mode is now set successfully.

5. Maintenance

  • Keep the receiver and remote controls dry. Moisture can corrode electronic circuits.
  • Avoid extreme temperatures. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt plastic parts.
  • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
  • Use only soft, dry cloths for cleaning. Do not use harsh chemicals, cleaning solvents, or strong detergents.
  • Ensure proper ventilation around the receiver to prevent overheating.

6. Troubleshooting

  • Device not responding to remote:
    1. Check if the remote control is paired correctly. Perform the code clearing and re-pairing steps if necessary.
    2. Ensure the receiver has power.
    3. Verify the remote control battery is not depleted.
    4. Check for any obstructions or excessive distance between the remote and receiver.
  • Incorrect operating mode:
    1. Review the mode setting instructions carefully.
    2. Perform a full reset (clearing the code) and then re-set the desired operating mode.
  • Interference: If the device is behaving erratically, check for other RF devices operating on similar frequencies nearby.

7. User Tips

  • Toggle Mode Correction: For Toggle mode, after pressing the learning button twice, quickly press button A on the remote control twice, and immediately after that, press button B on the same remote control twice. This clarifies the timing for successful setup.
  • Universal Use: This device is highly versatile and can be used for various applications like automating curtains, controlling electric doors, and managing lighting.
  • No Smartphone App: This device does not support smartphone connectivity via an app.

8. Support

For further assistance or detailed information, please refer to the official product documentation or contact QIACHIP customer support.

A PDF user manual is available for download: View User Manual (PDF)

© 2023 QIACHIP. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.