DRAGON GAUGE 6362

Contents

DRAGON GAUGE 52mm Boost Gauge User Manual

Model: 6362

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your DRAGON GAUGE 52mm High Speed Stepper Motor 7 Colors Light Dual Display Racing Car Turbine Boost Gauge. Please read this manual thoroughly before installation and use to ensure proper function and safety.

DRAGON GAUGE 52mm Boost Gauge with 7 color display options
DRAGON GAUGE 52mm Boost Gauge showcasing its 7-color LED display options.

Specifications

FeatureSpecification
Item NameTurbo Boost Gauge (-1~2 Bar)
Diameter2" / 52mm
CurrentIGN MAX 0.3A, ILM 0.3A
PowerDC(10-15V) 12V Professional
CompatibilityUniversal for all 12V Cars
Special FeaturesBoost gauge, 7 Colors Backlight, Dual Display
Item Weight0.28KG
Item Height52mm
Item Width52mm
Item Length52mm
MaterialStepper motor
Placement on VehicleFront
Manufacturer Part Number6362
Interchange Part Number636
OriginMainland China
Dimensions of the 52mm boost gauge
Physical dimensions of the boost gauge: 52mm height, 52mm width, 52mm length.

Package Contents

Your DRAGON GAUGE Boost Gauge package includes:

  • 1 x Boost Gauge
  • 1 x Boost Sensor
  • 1 x PVC Hose (6 Feet)
  • 1 x T-Fitting
  • 1 x Wire Harness
  • 1 x English Manual
Contents of the boost gauge package including gauge, sensor, hose, T-fitting, wire, and manual
All components included in the DRAGON GAUGE Boost Gauge package.

Setup Instructions

Professional installation is highly recommended for this product. Incorrect wiring can damage the gauge or your vehicle's electrical system. Refer to the detailed wiring diagram below for connections.

Wiring Connections:

  • RED Wire: Connect to Ignition Switch 12V (+)
  • BLACK Wire: Connect to Battery (-)
  • GREEN Wire: Connect to Sensor
  • NYLON TUBING: Connect to Boost/Vacuum Gauge
Wiring diagram for various electrical gauges, including boost/vacuum gauge
Detailed wiring diagram for electrical gauges. For the Boost/Vacuum Gauge (6361), connect RED to Ignition Switch 12V(+), BLACK to Battery(-), GREEN to Sensor, and NYLON TUBING to the gauge.

Initial Power-On Note:

Upon initial power-on, if the turbine meter's pointer is not at the "0" position, this is not a malfunction. It is normal behavior. You need to connect the turbine meter to the sensor correctly and then turn on the power. The pointer will then indicate "0".

Rear view of the boost gauge showing electrical connections
Rear view of the boost gauge, highlighting the connection points for wiring.

For a more detailed guide, please refer to the official user manual PDF: User Manual (PDF)

Operating Instructions

The DRAGON GAUGE Boost Gauge features a high-speed stepper motor for quick and accurate response, along with a clear LED display offering 7 selectable backlight colors.

Changing Backlight Color:

The gauge includes a button on the lens. Press this button to cycle through the 7 available backlight colors. Note that when the power is first turned on, the display may show red as a warning. The light color cannot be changed until the sensor is correctly connected and the gauge returns to normal operation.

DRAGON GAUGE 52mm Boost Gauge displaying various backlight colors
The boost gauge showcasing its multiple backlight color options.

Operation Demonstration:

Watch this video to see the gauge in operation and how to change the backlight colors.

Video demonstrating the DRAGON GAUGE Boost Gauge's startup sequence and backlight color changing function.

Maintenance

To ensure the longevity and accurate performance of your boost gauge, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the gauge face and body. Avoid abrasive cleaners or solvents that could damage the display or finish.
  • Connections: Periodically check all wiring and hose connections to ensure they are secure and free from corrosion or damage.
  • Sensor: Ensure the boost sensor is free from debris and properly connected to the vacuum line.
  • Environmental Factors: Protect the gauge from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.

Troubleshooting

If you encounter issues with your boost gauge, refer to the following common problems and solutions:

Gauge Pointer Not at "0" on Startup:

As mentioned in the setup instructions, if the pointer is not at "0" when the gauge is first powered on, this is normal. Ensure the boost sensor is correctly connected to the gauge. Once the sensor is properly connected and power is supplied, the pointer should calibrate to "0".

No Display or Incorrect Readings:

  • Check Power: Verify that the RED wire is receiving 12V power from the ignition switch and the BLACK wire has a good ground connection to the battery (-).
  • Check Sensor Connection: Ensure the GREEN wire is securely connected to the boost sensor and the sensor itself is properly installed in the vacuum line.
  • Inspect Wiring: Look for any loose, cut, or pinched wires in the harness.
  • Hose Integrity: Check the PVC hose for any kinks, leaks, or blockages that could affect pressure readings.

If problems persist after checking these points, professional assistance may be required.

User Tips

  • The boost gauge is a valuable tool for monitoring your vehicle's turbo performance, helping you keep track of engine efficiency and potential issues.
  • With its compact 52mm dimensions (height, width, and length), the gauge is designed for versatile placement in various vehicle dashboards or custom mounts.
  • The dual display (analog needle and digital LED) provides clear and quick readings, enhancing your driving experience.

Warranty and Support

For any questions, technical support, or warranty claims regarding your DRAGON GAUGE Boost Gauge, please contact the seller or manufacturer directly through your purchase platform. Keep your purchase records for reference.

© 2023 DRAGON GAUGE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.