HEGEHE 5050 RGB LED Strip

Contents

HEGEHE 220V 5050 RGB LED Strip Light User Manual

Model: 5050 RGB LED Strip

1. Introduction

This manual provides detailed instructions for the safe and effective use of your HEGEHE 220V 5050 RGB LED Strip Light. This flexible, high-brightness LED strip is designed for both indoor and outdoor decoration, offering a variety of colors and control options. Please read this manual thoroughly before installation and operation.

2. Safety Information

  • The power cord is for use in dry locations only.
  • If installed outdoors, all connections and ends of the LED strip must be protected in a watertight enclosure or completely sealed to maintain the IP67 waterproof rating of the strip itself. The plug is not waterproof.
  • The LED strip must be completely unrolled before being powered on. Do not operate the strip while it is still coiled, as this can cause it to overheat, melt, and lead to safety hazards.
  • Any modification to the product should only be performed under the guidance of a professional electrician. The manufacturer is not responsible for damage caused by unauthorized modifications.
  • Ensure the working input voltage matches your local power supply (AC110V/220V).

3. Specifications

Feature Specification
Type SMD 5050/2835 LED Strip Light
Working Input Voltage AC110V/220V (220V-240V)
LED Chip Model SMD5050
LEDs Quantity 60 LEDs/m
Emitted Colour Options White, Warm White, Blue, Red, Green, RGB
Length Options 1m, 2m, 3m, 4m, 5m, 20m, 100m
Waterproof Grade IP67 (Strip only, plug not waterproof)
Working Temperature -20°C to 60°C
Average Life 50,000 hours
RGB Strip Size W14mm x H8mm
Single Color Strip Size W10mm x H5mm
Remote Control Distance ≤10M
Certification CE & RoHS Approved, CCC, FCC
Power Generation Switch
Occasion Living room

Note: This 5050 LED strip offers 2 times the luminance compared to SMD 2835 strips.

4. Package Contents

The contents of your package will vary depending on the specific model purchased:

  • IR RGB Package: 1 * LED Strip Light, 1 * 750W Controller, 1 * 24 KEY remote
  • 24Key WiFi RGB Package: 1 * LED Strip Light, 1 * 750W Bluetooth Controller, 1 * 24 KEY remote
  • Bluetooth RGB Package: 1 * LED Strip Light, 1 * 750W WIFI Controller, 1 * 20 KEY remote
  • RGB Dual Control Package: 1 * LED Strip Light, 1 * 750W Controller, 1 * Touch remote control, 1 * Touch Panel
  • 25Key WiFi RGB Package: 1 * LED Strip Light, 1 * 1500W Bluetooth Controller, 1 * 25 KEY remote
  • White/Warm White/Blue Package: 1 * LED Strip Light, 1 * EU Plug (no remote, no controller)

5. Installation

Follow these steps for easy and quick installation:

  1. Prepare the Strip: Ensure the LED strip is completely unrolled before connecting to power.
  2. Align and Insert: Align the light bar with the pin connector and insert it securely.
  3. Connect Controller: Connect the controller to the light strip.
  4. Power Connection: Connect the controller to the power supply (EU Plug).
Diagram showing three steps for connecting the LED strip: 1. Aligning the light bar with the pin. 2. Connecting the connector to the light strip. 3. Completing the connection to the power supply.
Figure 1: Easy and Quick Installation Steps

Cutting the LED Strip

The LED strip is cuttable every 100CM (approximately 40 inches) at marked intervals. Look for the scissor icon on the strip to identify the cutting points.

Close-up of an LED strip showing a scissor icon indicating a cuttable section.
Figure 2: LED Strip Cuttable Section
Image showing a pure copper plating pin for connection and a diagram indicating that the strip can be cropped every 100cm.
Figure 3: Pure Copper Plating Pin and Cuttable Markings

6. Operating Instructions

6.1 Remote Control Operation

Use the provided remote control to manage your LED strip light. The functions vary slightly depending on the remote type (IR 24-key, Bluetooth 20-key, WiFi 24-key, WiFi 25-key, or Touch remote).

Diagram of a 24-key wireless remote control for LED strip lights, showing buttons for power, brightness, R, G, B, W colors, and various dynamic modes like flash, strobe, fade, and smooth.
Figure 4: 24-Key Wireless Remote Control Layout
Detailed diagram of a remote control button functions, including brightness and speed adjustment, static color choices, music modes, and dynamic effects like seven-color transformation and RGB tricolor jump.
Figure 5: Remote Control Button Functions
Key description for a hand-held touch remote control, highlighting ON/OFF, color ring selection for 16 million colors, brightness adjustment, mode selection (28 dynamic modes), and speed adjustment.
Figure 6: Hand-Held Touch Remote Control Key Description

Common Remote Functions:

  • ON/OFF: Power on or off the LED controller.
  • Brightness +/-: Adjust the brightness in static mode or light flashing rate in jump mode.
  • R/G/B/W Buttons: Select Red, Green, Blue, or White static colors.
  • Color Selection Buttons: Choose from various static colors (e.g., 11 static color choices, 7 static colors like RGB, Green, Blue, Yellow, Cyan, Purple, White).
  • Dynamic Modes: Buttons like FLASH, STROBE, FADE, SMOOTH, JUMP3, JUMP7, FADE3, FADE7, MODE1-MODE4 activate different lighting effects (e.g., colorful jumping, roundest flashing, colorful gradient, dynamic model circulation, 3/7 colors jump changing, 3/7 colors gradual changing, seven-color transformation, red breathing light, three-color gradient light).
  • Music Mode: Some remotes feature sound-control modes (I, II, III, IV) for music synchronization.
  • Color Ring Selection: For touch remotes, use the color ring to select from 16 million colors.

6.2 App Control (for WiFi/Bluetooth models)

For models with WiFi or Bluetooth controllers, you can control the LED strip using a smartphone app. Scan the QR code provided on the controller or in the product packaging to download the compatible app (e.g., Lotus Lantern, Tuya Smart).

Video 1: Demonstration of App and Remote Control for LED Strip
Image showing a smartphone screen with an app interface for controlling LED strip lights, indicating app control via Bluetooth when no WiFi signal is present.
Figure 7: App Control Interface
Image showing a wall-mounted touch panel controller for LED strip lights, allowing color and brightness adjustment.
Figure 8: Wall Touch Panel Controller

6.3 Brightness Adjustment

The LED strip supports 0-100% brightness adjustment. Use the dedicated brightness buttons on your remote control or the slider within the smartphone app to set your desired light intensity.

Diagram illustrating 0-100% brightness adjustment for LED strip lights, showing different light intensities from off to full brightness.
Figure 9: Brightness Adjustment Levels

7. Maintenance

  • Cleaning: Gently wipe the LED strip with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Connection Check: Periodically inspect all connections to ensure they are secure and free from corrosion, especially for outdoor installations.
  • Storage: If storing the LED strip for an extended period, ensure it is clean, dry, and coiled loosely to prevent damage.

8. Troubleshooting

  • LED Strip Not Lighting Up:
    • Check if the power plug is securely connected to a working outlet.
    • Ensure the controller is properly connected to the LED strip.
    • Verify that the LED strip is completely unrolled and not overheating.
    • Confirm the correct voltage (AC110V/220V) is being supplied.
  • Remote Control Not Responding:
    • Check the battery in the remote control and replace if necessary.
    • Ensure there are no obstructions between the remote and the controller.
    • For IR remotes, ensure direct line of sight to the IR receiver on the controller.
  • Colors Not Changing or App Not Connecting:
    • For app-controlled models, ensure Bluetooth or WiFi is enabled on your device and the app is correctly paired with the controller.
    • Restart the app and the LED strip (by unplugging and replugging the power).
    • Ensure the app is up to date.

9. User Tips

  • Secure Installation: While the strip is flexible, ensure it is properly secured with appropriate clips or mounting solutions, as it may not have built-in adhesive.
  • Component Verification: Upon receiving your product, immediately verify that all components, especially the remote control, are included and functional.
  • Outdoor Use Precaution: Remember that only the LED strip itself is IP67 waterproof. The power plug and controller are not. Always ensure these components are housed in a fully watertight enclosure if used outdoors.

10. Warranty and Support

For detailed technical diagrams, warranty information, and further support, please refer to the official User Manual (PDF) available at https://manuals.plus/m/36d0ad45ffe6a59e3fea585791ebd22f2b6072a2a9f1ec7c678448bea3a577f8. This document contains comprehensive information that may not be fully covered in this condensed guide.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.