1. Introduction
Thank you for choosing the KAK Swivel Plate 7610. This high-quality rotary plate is designed to provide smooth, 360-degree rotation for various furniture applications. Constructed from thickened iron with full solid steel bearing balls, it offers durability and reliable performance. This manual provides essential information for proper installation, operation, and maintenance to ensure the longevity and optimal function of your swivel plate.
2. Specifications
The KAK Swivel Plate 7610 is available in multiple sizes, each designed for robust performance.
| Attribute | Description |
|---|---|
| Product Type | Swivel Plate |
| Model Number | 7610 |
| Material | Iron |
| Available Sizes | 6 inch, 8 inch, 10 inch, 12 inch |
| Overall Height | 23mm |
| Steel Plate Thickness (6/8/10 inch) | 2mm |
| Steel Plate Thickness (12 inch) | 2.5mm |
| Bearing Capacity | Up to 75KG |
| Rotation | 360 Degrees Rotatable |
| Features | Full Solid Steel bearing balls for smoother swivel, Easy-installing, Smooth Operation, Quality Painting Surface |
| Applications | Corner Cabinets, Turntables, Magazine Racks, Movie Poster Displays, Floral Arrangements, Cake Decoration, Music Boxes, Swivel Chairs, Marine Seats, etc. |
3. Setup and Installation
The KAK Swivel Plate is designed for easy installation. Follow these steps to properly install your swivel plate:
- Prepare Surfaces: Ensure both the top and bottom surfaces where the swivel plate will be mounted are clean, flat, and stable.
- Position the Plate: Place the bottom plate of the swivel mechanism onto the stationary surface (e.g., chair base, cabinet floor). Ensure it is centered and aligned as desired.
- Mark Screw Holes: Use a pencil or marker to mark the positions of the screw holes on the stationary surface through the pre-drilled holes on the swivel plate.
- Drill Pilot Holes (Optional but Recommended): For wood surfaces, drill small pilot holes at the marked positions. This helps prevent wood splitting and ensures screws go in straight.
- Secure Bottom Plate: Attach the bottom plate to the stationary surface using appropriate screws (not included, typically wood screws for furniture). Ensure it is firmly secured.
- Attach Top Plate: Place the movable part of your furniture (e.g., chair seat, cabinet top) onto the top plate of the swivel mechanism. Align the screw holes.
- Secure Top Plate: Mark and drill pilot holes (if necessary) for the top plate, then secure it firmly with screws.
- Test Rotation: Once both plates are securely fastened, gently test the 360-degree rotation to ensure smooth and unrestricted movement.
4. Operating Instructions
The KAK Swivel Plate provides a smooth, 360-degree rotation for your furniture. Once installed, simply apply gentle force to rotate the attached item. The full solid steel bearing balls ensure a fluid and quiet movement.
Common Applications:
- Swivel chairs and bar stools
- Rotating display stands (e.g., for magazines, movie posters)
- Turntables for crafts, cake decoration, or serving
- Rotating shelves in corner cabinets
- Marine seats
5. Maintenance
To ensure the long-term smooth operation of your KAK Swivel Plate, consider the following maintenance tips:
- Cleaning: Periodically wipe down the exterior of the swivel plate with a dry or slightly damp cloth to remove dust and debris. Avoid harsh chemicals that could damage the painted surface.
- Lubrication: While the steel bearing balls are designed for smooth operation, a light application of a silicone-based lubricant or dry lubricant spray (e.g., PTFE spray) into the bearing channels can help maintain optimal smoothness and prevent potential squeaking over time. Do this sparingly and wipe off any excess.
- Check Fasteners: Regularly inspect all mounting screws to ensure they remain tight. Loose screws can affect stability and rotation.
- Avoid Overloading: Do not exceed the maximum bearing capacity of 75KG to prevent damage to the mechanism.
6. Troubleshooting
If you encounter any issues with your KAK Swivel Plate, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stiff or rough rotation | Lack of lubrication, accumulated dirt/debris, uneven mounting. | Clean the bearing area and apply a light lubricant. Check if the mounting surfaces are flat and screws are evenly tightened. |
| Squeaking noise during rotation | Dry bearings, friction between metal parts. | Apply a small amount of silicone-based or dry lubricant to the bearing balls and channels. |
| Wobbling or instability | Loose mounting screws, uneven weight distribution, damaged plate. | Tighten all mounting screws. Ensure the load is centered. Inspect the plate for any visible damage. |
| Plate not rotating 360 degrees | Obstruction, incorrect installation. | Check for any objects blocking the rotation path. Re-verify installation steps to ensure proper alignment. |
7. User Tips
- Mounting Hole Alignment: When installing, carefully align the pre-drilled holes with your furniture. In some cases, minor adjustments or widening of holes may be necessary for a perfect fit.
- Surface Preparation: Always ensure mounting surfaces are clean and flat to prevent uneven stress on the swivel mechanism.
- Screw Selection: Use screws appropriate for your furniture material (e.g., wood screws for wood, machine screws for metal) to ensure a secure attachment.
8. Warranty and Support
All KAK products come with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures that the product is free from defects in material and workmanship under normal use.
For any quality problems within 7 days of receipt, you may be eligible for a return. Please note that buyers typically bear the return shipping costs for such cases.
For further assistance, technical support, or warranty claims, please contact KAK Official Store customer service. All emails are typically answered within 24 hours.
Additionally, a detailed user manual in PDF format is available for download: View User Manual (PDF)