MiBoxer FUTC08

Contents

MiBoxer FUTC08 6W RGB+CCT LED Garden Light

Model: FUTC08

Brand: MiBoxer

Introduction

The MiBoxer FUTC08 6W RGB+CCT LED Garden Light is a smart outdoor lighting solution designed for garden and home lighting. It features 2.4GHz wireless technology, offering low power consumption, long signal transmission, and strong anti-interference capabilities. This product supports auto-transmitting and auto-synchronizing functions, allowing for versatile control options including remote, smartphone app, and third-party voice control.

MiBoxer FUTC08 6W RGB+CCT LED Garden Light with various remote control options

MiBoxer FUTC08 6W RGB+CCT LED Garden Light, DC24V, IP66, with various remote control options shown below.

Features

  • RGB+CCT Lighting: Offers 16 million colors to choose from, allowing for diverse lighting atmospheres.
  • Color Temperature Adjustable: Adjust color temperature from 2700K (Warm White) to 6500K (Cool White).
  • Dimmable & Saturation Control: Adjust brightness and color saturation to your preference.
  • 2.4GHz RF Wireless Transmission: Utilizes advanced 2.4GHz wireless technology for reliable control.
  • Remote Control: Compatible with various MiBoxer 2.4GHz remote controls (purchased separately) with a control distance of up to 30m.
  • Smartphone APP Control: Requires a 2.4GHz gateway (WL-Box2, purchased separately) for control via smartphone app.
  • Third-Party Voice Control: Supports integration with Amazon Alexa and Google Assistant via a 2.4GHz gateway (WL-Box2).
  • IP66 Waterproof and Dustproof: Designed for outdoor use, capable of working normally in rainy conditions.
  • Signal Transmitting & Modes Synchronization: Lights can transmit signals to other lights within 30m, and multiple lights can synchronize dynamic modes.
  • DMX512 Controllable: Can be controlled via DMX512 (requires DMX512 LED transmitter, purchased separately).
  • High Lumen LED Chips: Provides bright, high-quality light with low power consumption.
  • Optical Lens: Anti-dazzling optical lens for symmetrical and bright light ray.
  • Waterproof Male Connector: Ensures secure and waterproof power connection.
  • High Efficiency Heat Dissipation: Aluminum body material ensures effective heat management for extended lifespan.
Diagram illustrating key features of the FUTC08 light including 2.4G RF, 16 million colors, remote control, app control, voice control, dimmable, signal transmitting, and color temperature adjustment.

Key features of the FUTC08 light, including 2.4G RF, 16 million colors, remote control, app control, voice control, dimmable, signal transmitting.

Specifications

ParameterValue
Product Name6W RGB+CCT LED Garden Light (DC24V)
Model No.FUTC08
Power6W
InputDC24V
Working Temperature-20~45°C
Color Temperature2700K~6500K
Luminous Flux550LM
Luminous Efficiency90LM/W
CRI>80
Lifespan50000 hours
Beam Angle25°
Illumination Distance>10m
IP RateIP66
RF2.4GHz
Transmitting Power6dBm
Control Distance30m
Body MaterialAluminum
CertificationCCC, CE
Product parameters and connection diagram for FUTC08, showing dimensions and electrical specifications.

Product parameters and connection diagram for FUTC08, showing dimensions and electrical specifications.

FUTC08 garden light with energy label indicating Energy Class E.

FUTC08 garden light with energy label indicating Energy Class E.

Package Contents

The standard package for the FUTC08 LED Garden Light includes:

  • 1x 6W RGB+CCT LED Garden Light
  • 1x Anti-corrosion Garden Spike
  • 1x User Manual

Note: Remote controls, WiFi gateways, and DMX512 transmitters are sold separately.

Packing list showing one 6W RGB+CCT LED garden light, one anti-corrosion garden spike, and one manual.

Packing list showing one 6W RGB+CCT LED garden light, one anti-corrosion garden spike, and one manual.

Setup & Installation

Physical Installation

  1. Choose Location: Select a suitable outdoor location for your garden light.
  2. Mounting Options: The FUTC08 can be installed using its integrated bracket for surface mounting or with the provided anti-corrosion garden spike for ground insertion.
  3. Secure Installation: Ensure the lighting fixture is installed correctly and solidly. Avoid using it in areas subject to strenuous vibration.
FUTC08 garden light with ground spike for easy outdoor installation.

FUTC08 garden light with ground spike for easy outdoor installation.

FUTC08 garden light with bracket for surface mounting.

FUTC08 garden light with bracket for surface mounting.

Power Connection

  1. Safety First: Always switch off the power supply before connecting or installing the lighting fixture.
  2. Voltage Check: Verify that the input voltage supply (DC24V) is in accordance with the lighting fixture's requirements.
  3. Connect Adapter: Connect the garden light to a compatible DC24V adapter.
  4. Secure Connections: Ensure proper connection of both the cathode and anode. Incorrect connection can damage the light.
  5. Power On: Only turn on the power after ensuring all connections are correct and there is no short circuit.
Connection diagram for the FUTC08 garden light, showing how multiple lights can be connected to a single power adapter.

Connection diagram for the FUTC08 garden light, showing how multiple lights can be connected to a single power adapter.

Operation

Remote Control (Purchased Separately)

The FUTC08 garden light is compatible with various MiBoxer 2.4GHz remote controls (e.g., FUT089, FUT088, FUT092, FUT096, B8, B4/T4, B3/T3, B0). Ensure you have a compatible remote for operation.

Image showing the FUTC08 garden light being controlled by a 2.4GHz RF remote, with various compatible remote models displayed below.

Image showing the FUTC08 garden light being controlled by a 2.4GHz RF remote, with various compatible remote models displayed below.

Demonstration of FUTC08 light with remote control, showing brightness, saturation, color, and dynamic mode changes.

Linking Code Instructions

  1. Switch off the light. After 10 seconds, switch it on again.
  2. Within 3 seconds of switching on the light, short press the "I" button on the remote 3 times.
  3. The light will blink 3 times slowly, indicating successful linking.

Attention: If linking fails (light does not blink slowly), repeat the steps. A light that has already been linked cannot be linked again.

Unlinking Code Instructions

  1. Switch off the light. After 10 seconds, switch it on again.
  2. Within 3 seconds of switching on the light, short press the "I" button on the remote 5 times.
  3. The light will blink 10 times quickly, indicating successful unlinking.

Attention: If unlinking fails (light does not blink quickly), repeat the steps. A light that hasn't been linked does not need to be unlinked.

Diagram showing step-by-step instructions for linking and unlinking the FUTC08 light with a remote control.

Diagram showing step-by-step instructions for linking and unlinking the FUTC08 light with a remote control.

Dynamic Mode Selection

The FUTC08 light offers various dynamic modes. You can switch between two main tables of dynamic modes:

Select Dynamic Mode Table 1 (Default): While the light is in static mode, short press the "S+" button 5 times quickly until the blue light flashes 3 times slowly.

Select Dynamic Mode Table 2 (Manual Switch): While the light is in static mode, short press the "S-" button 5 times quickly until the yellow light flashes 3 times slowly.

NumberDynamic Mode (Table 1 - Default)Brightness / Saturation / Speed
1Mardi GrasAdjustable
2Automatic color change
3Sam
4Gemstone
5Twilight
6American
7Fat Tuesday
8Party
9Slow Color Splash
NumberDynamic Mode (Table 2 - Manual)Brightness / Saturation / Speed
1Colors gradual changeAdjustable
2White light Gradual change
3RGB gradual change
4Seven colors jump to change
5Jump to change randomly
6Red light gradual change +Flash 3 times
7Green light gradual change +Flash 3 times
8Blue light gradual change +Flash 3 times
9White light gradual change +Flash 3 times
Table listing dynamic modes for the FUTC08 light, including Mardi Gras, Automatic color change, Sam, Gemstone, Twilight, American, Fat Tuesday, Party, and Slow Color Splash, all with adjustable brightness, saturation, and speed.

Table listing dynamic modes for the FUTC08 light, including Mardi Gras, Automatic color change, Sam, Gemstone, Twilight, American, Fat Tuesday, Party, and Slow Color Splash, all with adjustable brightness, saturation, and speed.

"Do Not Disturb" Mode

This mode can be activated or turned off via remote control to save energy, especially in areas with frequent power failures.

To Turn On "Do Not Disturb" Mode:

  1. Press the "OFF" button three times within three seconds.
  2. Then, press the "ON" button three times.
  3. The LED light will flash four times quickly, indicating successful activation.

Attention: Once activated, if the light is OFF and you turn off and turn on power, you must turn off and turn on power twice to activate the light or use the APP/remote. If the light is ON and you turn off and turn on power, it will remain ON.

To Turn Off "Do Not Disturb" Mode:

  1. Press the "ON" button three times within three seconds.
  2. Then, press the "OFF" button three times.
  3. The LED light will flash four times slowly, indicating successful deactivation.

Attention: The light will always be in "ON" status if you turn on and turn off power once "Do Not Disturb" mode is closed.

Signal Transmitting & Modes Synchronization

One FUTC08 garden light can transmit signals from the remote control to another FUTC08 light within 30m. As long as there is a light within 30m, the remote control distance can be limitless.

Different garden lights can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within 30m distance. The same dynamic mode and speed can be synchronized.

Diagram illustrating signal transmitting and modes synchronization between multiple FUTC08 lights using a single remote control.

Diagram illustrating signal transmitting and modes synchronization between multiple FUTC08 lights using a single remote control.

Smartphone App Control (Requires WL-Box2 Gateway)

To control your FUTC08 light via a smartphone app, you will need a MiBoxer 2.4GHz gateway (WL-Box2), which is sold separately. The WL-Box2 supports the "Tuya Smart" app.

Image showing smartphone app control and third-party voice control setup, requiring a 2.4GHz gateway like WL-Box1, compatible with Amazon Alexa and Google Assistant.

Image showing smartphone app control and third-party voice control setup, requiring a 2.4GHz gateway like WL-Box1, compatible with Amazon Alexa and Google Assistant.

Tuya Smart App Connection Steps (for WL-Box2)

  1. Step 1: Download the "Tuya Smart" app to your smartphone.
  2. Step 2: On the app's home page, touch the "+" icon in the upper right corner to add a device.
  3. Step 3: Touch "Lighting" and select "Light Source (BLE+Wi-Fi)".
  4. Step 4: If the indicator is already blinking or breathing, confirm. If not, switch the device off, on, off, and on until the indicator blinks or breathes. Then press and hold the "SET" button for 3 seconds.
  5. Step 5: The gateway completes the match. Touch "Done".
  6. Step 6: Match the device with the light for smart control.
Six-step guide for connecting the MiBoxer gateway to the Tuya Smart app for smart control.

Six-step guide for connecting the MiBoxer gateway to the Tuya Smart app for smart control.

Third-Party Voice Control (Requires WL-Box2 Gateway)

With the WL-Box2 gateway, the FUTC08 light can be controlled using voice commands through platforms like Amazon Alexa and Google Assistant. Ensure your gateway is properly set up and linked to your voice assistant account.

DMX512 Control (Requires DMX512 LED Transmitter)

For advanced lighting setups, the FUTC08 light supports DMX512 control. This requires a DMX512 LED transmitter (purchased separately) for RGB+CCT output mode.

  1. Choose the zone for the light by pressing "+" or "-" on the DMX512 transmitter (e.g., "CH12" means zone 12).
  2. Link: Switch off the light, wait 10 seconds, then switch on again. When the light is on, short press the "SET" button on the transmitter 3 times within 3 seconds. The light will blink slowly 3 times, indicating successful linking.
  3. Unlink: Switch off the light, wait 10 seconds, then switch on again. When the light is on, short press the "SET" button on the transmitter 5 times within 3 seconds. The light will blink quickly 10 times, indicating successful unlinking.

Attention: If linking or unlinking fails, repeat the steps.

Diagram showing the connection of a DMX512 LED transmitter to a DMX512 control panel, wirelessly controlling multiple FUTC08 lights in different zones.

Diagram showing the connection of a DMX512 LED transmitter to a DMX512 control panel, wirelessly controlling multiple FUTC08 lights in different zones.

Maintenance

  • Cleaning: Gently wipe the light fixture with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Waterproof Rating: The FUTC08 has an IP66 waterproof rating, meaning it is protected against powerful water jets and dust. It is suitable for outdoor use in various weather conditions, including rain.
  • Inspection: Periodically check the power cable and connectors for any signs of wear or damage. Ensure the power cable nut is securely tightened to maintain waterproof integrity.
  • Heat Dissipation: Do not cover the lighting housing during operation, as it will heat up. Proper airflow is essential for optimal performance and lifespan.
Image demonstrating the FUTC08 light's IP66 waterproof rating, showing it working normally outdoors in rainy conditions.

Image demonstrating the FUTC08 light's IP66 waterproof rating, showing it working normally outdoors in rainy conditions.

Close-up of the power cable nut and anti-corrosion garden spike, highlighting their durable and waterproof design.

Close-up of the power cable nut and anti-corrosion garden spike, highlighting their durable and waterproof design.

Troubleshooting

  • Light Not Turning On:
    • Ensure the power supply is connected and active.
    • Check that the input voltage (DC24V) matches the light's requirements.
    • Verify that the cathode and anode connections are correct and secure.
    • If using a remote, ensure it is properly linked to the light (refer to Linking Code Instructions).
  • Remote Control Not Working:
    • Ensure the remote is within the 30m control distance of the light.
    • Check if the light is in an area with strong electromagnetic interference or wide metal areas, which can affect remote distance.
    • Re-link the remote to the light if control is lost (refer to Linking Code Instructions).
    • Ensure the remote has working batteries (remotes are shipped without batteries).
  • App/Voice Control Issues:
    • Confirm that the WL-Box2 gateway is powered on and connected to your Wi-Fi network.
    • Ensure the gateway is properly linked to the FUTC08 light and the smartphone app (refer to App Connection Steps).
    • For voice control, verify that the WL-Box2 is correctly integrated with your Amazon Alexa or Google Assistant account.
  • Light Flashing or Malfunctioning:
    • Disconnect power, wait a few minutes, and reconnect.
    • Ensure the light housing is not covered and has adequate ventilation.
    • If the issue persists, contact customer support.

User Tips

  • Optimal Control: For the best experience with remote control, ensure a clear line of sight or minimal obstructions between the remote and the light.
  • Gateway Placement: If using a WL-Box2 gateway for app/voice control, place it centrally within your lighting setup for optimal signal strength.
  • Group Control: Utilize the signal transmitting and synchronization features to create cohesive lighting effects across multiple FUTC08 lights in your garden.
  • Energy Saving: Use the "Do Not Disturb" mode in areas where power fluctuations are common to help conserve energy.

Warranty & Support

This product typically comes with a 2-year warranty. For specific warranty details, claims, or technical support, please refer to the documentation provided at the time of purchase or contact the seller directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.