1. Introduction
The DEGEN DE31MS is a portable active soft loop antenna designed to enhance Medium Wave (MW) and Short Wave (SW) reception for various radios. Its compact size and lightweight design make it ideal for travel and quick setup in diverse environments such as hotels, offices, or for field DX (long-distance reception) activities. This antenna can connect to radios equipped with a ferrite antenna or an external antenna jack. For radios without an antenna jack, a provided cable with clips and a conversion jack allows for versatile connection.

2. Package Contents
Please check the package carefully to ensure all components are present:
- 1 x Controlling Box
- 1 x Amplifier Box
- 1 x Connecting Cable
- 1 x Connector (Conversion Jack)
- 1 x Soft Antenna Loops
- 1 x Clips (for connecting to radio's telescopic antenna/ground)
- 1 x MW Magnet Bar Inductor
Note: The antenna suction cup is currently not included in the package.

3. Setup Instructions
Follow these steps to set up your DEGEN DE31MS antenna. Refer to the diagram below for visual guidance.

- Carefully remove all components from the packaging.
- **Install Batteries:** Open the Battery Compartment (14) on the Control Box (7). Insert two 1.5V AAA (UM4) batteries (not included), ensuring correct polarity. Close the battery compartment.
- **Position the Soft Antenna Loop:** Fully extend the Telescopic Antenna (5) of the Soft Antenna Loop (3). Hang the loop on a hook or clip it to a window frame using the provided Clip (2).
- **Connect the Amplifier and Control Boxes:** Place the Control Box (7) near your Radio (4). Insert one end of the Connecting Cable (9) into the Amplifier Box (6) and the other end into the Control Box (7).
- **Connect to your Radio:**
- **If your radio has a Shortwave (SW) antenna input jack:** Insert the output plug from the Control Box (7) directly into your radio's SW antenna jack.
- **If your radio does NOT have an SW antenna input jack:** Use the Adapter (11). Insert the adapter's plug into the Control Box's output socket. Then, clip the White Clip (12) of the adapter to your radio's telescopic antenna, and the Black Clip (13) to your radio's ground wire. (A proper ground connection significantly improves reception).
- **Power On:** After ensuring all connections are correct, turn on the Power Switch (10) on the Control Box (7). The Power Indicator light (8) on the Control Box should illuminate.

4. Operating Instructions
- **Tune your Radio:** Turn on your Radio (4) and tune it to a clear frequency near the desired station within the corresponding Medium Wave (MW) or Short Wave (SW) meter band.
- **Adjust Antenna Tuning:** While your radio is tuned to a clear spot, slowly adjust the Tuning Knob (15) on the Control Box (7). You should observe an improvement in signal strength or clarity as you tune the antenna to resonate with the desired frequency.
- **Fine-tune Reception:** Once the antenna is tuned, use your radio's tuning controls to select the specific station for listening.
For optimal reception, experiment with the placement and orientation of the Soft Antenna Loop (3) and the MW Magnet Bar Inductor, especially for Medium Wave signals which are often directional.
5. Maintenance
- **Cleaning:** Wipe the antenna and control box with a soft, dry cloth. Do not use liquid cleaners or solvents.
- **Storage:** When not in use, store the antenna in a dry place, away from direct sunlight and extreme temperatures.
- **Battery Replacement:** Replace batteries when the Power Indicator light (8) dims or the antenna's performance degrades. Always use fresh 1.5V AAA (UM4) batteries.
- **Handling:** The antenna components, especially the soft loop and cables, are delicate. Handle them gently to prevent damage.
6. Troubleshooting
- **No Power Indicator Light (8):**
- Check if batteries are inserted correctly and have sufficient charge.
- Ensure the Power Switch (10) on the Control Box (7) is in the "ON" position.
- **Poor Reception / No Improvement:**
- Ensure all connections are secure between the antenna, control box, and radio.
- Verify that the antenna's Tuning Knob (15) is adjusted correctly for the desired frequency band (refer to Operating Instructions, step 8). When changing frequency bands, always re-tune the antenna.
- Experiment with the placement and orientation of the Soft Antenna Loop (3). For MW, the antenna is directional, so rotating it may improve signal.
- Keep the antenna away from large metal objects, frames, and cabinets, as these can cause interference. The antenna is designed for indoor use.
- Note that the antenna enhances existing signals and may also amplify noise in very weak signal areas. It cannot create a signal where none exists.
- **Physical Damage / Flimsy Components:**
- Handle the antenna components with care to avoid bending or breaking the soft loop and connectors.
- If components appear rusty or damaged upon arrival, contact customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Frequency Coverage | MW: 531 - 1602 kHz, SW: 3.9 MHz - 22 MHz |
| Power Source | 2 x 1.5V AAA (UM4) batteries (not included) |
| Power Consumption | Approximately 6mAh |
| Weight | Approx. 180g (without battery) |
| Body Material | Plastic |
| Style | Portable |
| Connectivity | No WIFI, No Bluetooth |
8. User Tips
- **Careful Handling:** The antenna is described as somewhat flimsy; handle all components, especially the soft loop and cables, with care to ensure longevity.
- **Optimal Placement:** Experiment with different indoor locations for the antenna. Keeping it away from large metal objects (like refrigerators or metal window frames) can significantly reduce interference and improve performance.
- **Directional Tuning:** For Medium Wave (MW) reception, the antenna is directional. Try rotating the Soft Antenna Loop (3) and the MW Magnet Bar Inductor to find the best orientation for a stronger signal.
- **Battery Life:** The antenna has moderate battery consumption, so a set of good quality AAA batteries can last for a considerable period.
- **Compatibility:** This antenna is known to work well with various portable radios, including models like the Tecsun PL330, Xhdata D-808, Retekess TR110, and Degen DE 1103. It is suitable for any receiver capable of receiving short and medium waves.
- **Realistic Expectations:** While the antenna can boost signals and reduce noise in certain conditions, it cannot create a signal where there is none. Its effectiveness is most noticeable when there's an existing weak signal that needs enhancement.
9. Warranty & Support
This DEGEN DE31MS Active Soft Loop Antenna is covered by a one-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any questions regarding your antenna, please contact the seller or manufacturer directly through their official support channels. Please retain your proof of purchase for warranty validation.