1. Introduction
The GODOX K-150A Mini Master Studio Flash is a compact and powerful lighting solution designed for small studios, portrait photography, product photography, and outdoor shooting. It offers a flash output of 150Ws with a stable 5600K daylight color temperature. Key features include stepless power adjustment, slave triggering, and an umbrella input for versatile light shaping. Its robust ABS housing ensures durability, making it an excellent choice for both beginners and experienced photographers seeking portable and reliable studio lighting.
For a more detailed guide, you can refer to the official user manual PDF: GODOX K-150A/K-180A Flash Light User Manual (PDF).
2. What's in the Box
Upon opening your GODOX K-150A package, you should find the following items:
- 1 x GODOX K-150A Studio Strobe Unit
- 1 x Modeling Lamp (75W)
- 1 x Power Cord (US/EU plug, specific to destination)
- 1 x 3-meter 3.5mm Sync Cord
- 1 x Instruction Manual & Warranty Card
3. Specifications
Below are the detailed technical specifications for the GODOX K-150A Studio Flash:
| Attribute | Specification |
|---|---|
| Model | K-150A |
| Flash Output | 150Ws |
| Guide Number (m ISO 100) | 42 |
| Color Temperature | 5600±200K |
| Power Voltage | AC 100-240V 50/60Hz (Universal) |
| Flash Power Control | 1/8 to Full (Stepless) |
| Modeling Lamp | 75Ws |
| Recycling Time | 0.5-3 seconds |
| Flash Triggering Methods | Sync Cord, Test Button, Slave Mode |
| Flash Duration | 1/2000-1/800s |
| Fuse | 5A |
| Dimensions | 17.5 * 17 * 10 cm (approx. 6.9 * 6.7 * 3.9 inches) |
| Weight | Approx. 0.59 KG (1.3 lbs) |
4. Setup
4.1 Flash Preparation
- Mounting: Mount the flash unit onto an appropriate light stand.
- Adjustment: Adjust the mounting bracket to your desired angle and tighten it securely.
- Umbrella Input: If using a studio umbrella, insert its shaft into the umbrella input hole on the flash unit and secure it.
4.2 Power Connection
- Insert the power cord into the power socket on the flash unit.
- Connect the other end of the power cord to a suitable AC 100-240V 50/60Hz power outlet.
- Turn on the main power switch on the flash unit. The charging indicator light will turn off while charging and illuminate green when fully charged and ready to fire.
5. Operating Instructions
5.1 Parts Overview
5.2 Flash Output Control
Rotate the power knob (Flash Output Controller) on the back of the unit to adjust the flash intensity from 1/8 to full power. When adjusting from high power to low power, press the 'TEST' button to release any residual charge in the capacitor.
5.3 Modeling Lamp Operation
The modeling lamp switch (labeled 'MODEL') controls the 75W modeling lamp. Flip the switch to the 'I' position to turn it on, and 'O' to turn it off. The modeling lamp helps visualize the lighting effect before taking a shot. Do not keep the modeling lamp on for extended periods. It is recommended to cool down for 1 minute after 5 minutes of continuous use.
5.4 Triggering Methods
The GODOX K-150A offers several ways to trigger the flash:
- Test Button: Press the 'TEST' button on the flash unit to manually fire a flash.
- Sync Cord: Connect your camera's PC sync port to the flash unit's Sync Cord Jack using the provided 3.5mm sync cord.
- Slave Mode (Optical Triggering): The built-in light sensor allows the K-150A to fire synchronously with another flash. Ensure the light sensor is facing the triggering flash.
- Wireless Trigger (Optional): For more advanced control, you can use a compatible wireless trigger system (e.g., Godox RT-16/X2T series) connected to the Sync Cord Jack.
5.5 Flash Head Rotation
The flash head can be rotated to adjust the direction of light. Loosen the knob on the mounting bracket, adjust the angle, and then tighten the knob to secure it.
5.6 Product Overview Video
6. Safety Information
- After 30 consecutive full-power flashes, allow the unit to cool down for at least 3 minutes before further use.
- Avoid prolonged use of the modeling lamp, especially when paired with softboxes or other flammable accessories. Continuous use should not exceed 10 minutes.
- When installing or replacing the flash tube, ensure the power is off and wear insulating gloves.
- Keep the flash unit away from water and high-temperature environments.
- Always use a stable light stand to prevent the unit from tipping over.
7. Troubleshooting
| Problem | Solution |
|---|---|
| Flash cannot be triggered | Check power connection. Ensure the charging indicator is green. Verify sync cord/trigger connection. |
| Flash intensity is unstable | Avoid voltage fluctuations; use a stable power supply. Press the test button to release residual charge. |
| Modeling lamp does not light up | Check the modeling lamp switch position. Replace the modeling lamp bulb if necessary. Confirm power supply is normal. |
| Slave triggering fails | Ensure the environment is free from strong light interference. Position the flash closer to the main flash to increase sensor sensitivity. |
8. User Tips
- The GODOX K-150A is compatible with Godox radio triggers (e.g., RT-16/X2T series) for wireless control.
- The flash features a photocell for slave triggering, allowing it to activate with the light from another flash without needing an external radio trigger.
- Always ensure the sync cord is securely connected to prevent accidental disconnections during a shoot.
- While the modeling lamp is useful for previewing light, remember its usage limits to prevent overheating and prolong its lifespan.
9. Warranty & Support
For official support, product registration, and warranty information, please visit the official Godox website: www.godox.com.
Please retain your purchase receipt and warranty card for any service claims.