1. Product Overview
The Usongshine Nema17 Stepper Motor 17HS4401 is a high-precision hybrid stepper motor designed for various applications requiring accurate positional control. It is commonly used in 3D printers, CNC milling machines, and laser engravers.


2. Safety Information
Please read and understand all safety warnings before installing, operating, or maintaining the stepper motor and associated equipment.
2.1. Warnings
- Fire and Burn Hazard: High temperatures generated during processing may ignite the workpiece, smoke, or surrounding materials. The processing area must be kept clear of flammable substances and equipped with fire extinguishing equipment. After processing, the workpiece and machine components (e.g., spindle, laser head) may remain hot for an extended period; verify full cooling before handling.
- Mechanical Injury Hazard: High-speed rotating spindles, moving gantries, belts, and lead screws pose serious risks of crushing, cutting, or entanglement injuries. Before performing any installation, commissioning, cleaning, or maintenance operation, disconnect the machine from the main power supply.
- Electrical Hazard: High-voltage circuits are present internally. Unauthorized personnel must not open the electrical control cabinet. All electrical connections must comply with local regulations and be performed by qualified electricians.
- Hazardous Substances and Fumes: Processing certain materials (e.g., plastics, composites, coated metals) may generate toxic, carcinogenic, or irritating fumes and dust. Use only in environments equipped with an effective Local Exhaust Ventilation (LEV) system.
3. Specifications
The following table details the technical specifications of the Nema17 Stepper Motor 17HS4401:
| Characteristic | Specification | Characteristic | Specification |
|---|---|---|---|
| Phase | 2 | Step Angle | 1.8° ± 0.09° |
| Rated Voltage | DC 3.6V | Rated Current | DC 1.5A / Phase |
| Phase Resistance (20℃) | 2.4*(1±15%)Ω/Phase | Phase Inductance (1KHz) | 3.7*(1±20%)mH/Phase |
| Holding Torque | ≥420mN.m (42N.cm) | Positioning Torque | 15 mN.m REF. |
| Rotating Direction | A-C B-D Clockwise | Maximum Starting Rate | ≥1500 PPS |
| Maximum Slewing Rate | ≥1900 PPS | Insulation Resistance | ≥100 MΩ (DC 500V) |
| Electrical Strength | AC600V/1mA/1S | Insulation Class | B |
| Weight | 255g | EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| Certification | UL, CE, ISO, ROHS | Type | HYBRID |


4. Installation and Wiring
4.1. Product Identification and Compatibility
This Nema17 Stepper Motor is compatible with all TWOTREES-branded machines and other equipment requiring Nema17 standard motors. Ensure the specific model 17HS4401 matches your equipment's requirements.
4.2. Installation Method
This accessory must be replaced exclusively by personnel trained by the equipment manufacturer or otherwise qualified professionals, strictly following the original manufacturer’s “User Manual / Maintenance Manual”. Incorrect installation may result in equipment damage, performance degradation, or safety hazards.
- Preparation: Confirm compatibility of the accessory model. Ensure the workspace is clean and well-ventilated.
- Power Disconnection: Shut down the host machine and unplug it from the main power source. Wait until all components—especially the laser source and spindle motor—are fully cooled.
- Removal of Old Component (if applicable): Refer to the original manufacturer’s manual; record wiring connections and mechanical positioning, then carefully remove the component to be replaced.
- Installation of New Component: Install the new accessory in reverse order. Ensure all mechanical connections are securely tightened and all electrical connections are correct, properly polarized, and firmly secured.
4.3. Wiring Diagram
The motor comes with connecting cables. There are typically two types of connectors: XH-2.54 and DuPont. Ensure you use the correct connector type for your control board.


Note on Wiring: If the motor rotates in the wrong direction, simply reverse the connection of one of the coil pairs (e.g., swap A+ with A- or B+ with B-).
5. Operation
5.1. Calibration
After installation, recalibrate the relevant systems (e.g., laser power, tool length, engraving area) as specified in the original manufacturer’s manual for your specific machine.
5.2. Testing
Conduct a low-power/low-speed no-load test under safe conditions to verify smooth operation, absence of abnormal noise, and absence of alarms before resuming normal use.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your stepper motor.
- Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or solvents that could damage the motor components.
- Inspection: Periodically check for loose connections, worn cables, or any signs of physical damage.
- Lubrication: Stepper motors typically do not require lubrication. Refer to your machine's manual for any specific lubrication requirements for connected components.
- Storage: Store the motor in a dry, dust-free environment within the recommended storage temperature range of -10°C to 50°C.
7. Troubleshooting
This section provides solutions to common issues you might encounter with your Nema17 Stepper Motor.
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor not rotating or rotating erratically | Incorrect wiring, insufficient power, driver misconfiguration, mechanical obstruction. | Check wiring against the diagram (Figure 5). Ensure power supply meets voltage and current requirements. Verify driver settings (e.g., micro-stepping, current limit). Remove any obstructions. |
| Motor rotating in the wrong direction | Incorrect coil phasing. | Reverse the connection of one of the coil pairs (e.g., swap A+ with A- or B+ with B-). |
| Motor making excessive noise or vibrating | Driver current too high/low, loose mounting, mechanical resonance, low-quality driver. | Adjust driver current. Ensure motor is securely mounted. Consider upgrading to quieter drivers like TMC2208. |
| Motor overheating | Driver current too high, insufficient cooling, excessive load. | Reduce driver current. Ensure adequate ventilation or add heatsinks to drivers. Reduce mechanical load if possible. |
| Skipped steps / Loss of position | Insufficient current, excessive speed, mechanical binding, driver issues. | Increase driver current (within motor limits). Reduce acceleration/speed settings. Check for smooth mechanical movement. Ensure driver is properly configured (e.g., A4988 Vref setting). |
8. User Tips
- These Nema17 motors are generally well-regarded for their performance in 3D printers and CNC applications.
- For quieter operation, especially in 3D printers, consider using advanced stepper motor drivers such as TMC2208 instead of older A4988 drivers.
- The motors can be driven with both 12V and 24V power supplies, offering flexibility in system design.
- When connecting, pay attention to the connector type (DuPont or XH-2.54) to match your control board. If the cable colors don't match a standard diagram, identify the coil pairs (A and B) and ensure correct phasing.
9. Frequently Asked Questions (FAQ)
- Q: What is the shaft diameter of this motor?
- A: The shaft diameter is typically 5mm, with some variations having a 6.35mm or 8mm diameter depending on the specific variant (e.g., 17HS4401S-XH-2.54, 17HS4401-DuPont, 17HS4401-XH-2.54). The detailed dimension diagram (Figure 3) shows a 5mm shaft diameter.
- Q: What is the difference between 17HS4401 and 17HS4401S?
- A: The primary difference often lies in minor physical characteristics or specific connector types. For example, the 'S' variant might refer to a specific shaft length or a different color of the motor body. Electrically, they are generally similar, but always check the full model number for precise specifications.
- Q: Are these motors suitable for a Prusa i3 or Anet A6 3D printer?
- A: Yes, these motors are commonly used and suitable for Prusa i3, Anet A6, and similar 3D printers, as well as small CNC machines.
- Q: What voltage should I set for the A4988 driver?
- A: For the A4988 driver, you typically set the Vref voltage to control the current. Given the motor's rated current of 1.5A per phase, you would calculate the appropriate Vref based on your driver's specific formula (e.g., Vref = I_max * 8 * R_sense for some A4988 boards). A common starting point might be around 0.6V to 1.2V, but always refer to your driver's datasheet and monitor motor temperature.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact Usongshine Official Store directly. You may also refer to the official user manual (PDF) for additional guidance.
A detailed user manual in PDF format is available for download: View User Manual (PDF)
Manufacturer Information:
- Brand: Usongshine
- Manufacturer Name: Shenzhen Two Trees Technology Co., Ltd.
- Address: 402, Building 11, No. 9, Qilin Road, Nankeng Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, China