1. Product Overview
The Leap TF6204 is a mini electronic interval timer designed for various sports and fitness training activities. It features both countdown and count-up timer functions, with audible and vibratory alarms, and a secure belt clip for convenience.
Key Features:
- Ideal for Boxing, Tabata, HIIT, Cardio, MMA/Boxing, Kettlebell, Weight lifting, Running, Stretching, and other sport trainings.
- Adjustable interval times from 2 seconds to 99 minutes.
- Stopwatch function.
- Beep and/or Vibrate alarm function.
- Secure belt clip for easy attachment.
- Supports 2-99 repeats for interval training.
- Count-up timer measures up to 99 hours, 59 minutes, 59 seconds, and 1/100th of a second.
- Power off function to conserve battery.
- Powered by 1x AAA Battery (1.5V).
Product Dimensions and Weight:
- Appearance Size: 65mm x 53mm x 26.5mm
- Weight: 44g (including battery)




2. Setup and Operation
2.1 Components and Controls

- Next Button: Used to navigate through settings.
- Start Button: Used to start, pause, and reset timers.
- LCD Screen: Displays time, intervals, and settings.
- Change Button: Used to adjust values and switch modes.
- Battery Cover: Access for AAA battery installation.
- Back Clip: For attaching the timer to clothing or equipment.
2.2 LCD Display Information
- Interval Countdown Time: Displays BH (Break/Hold), ALM (Alarm), M (Minutes), S (Seconds), Rep (Repeats).
- Counting Up Time: Displays BL (Backlight), M (Minutes), S (Seconds), 1/100 (1/100 second).
2.3 Power On/Off
- Power On: Press any button to start the timer.
- Power Off: Hold the [NEXT] button for 2 seconds to shut down the device.
2.4 Switching Between Counting Up/Down Modes
- From Countdown to Count-up: While in countdown mode, hold [NEXT] and press [CHANGE].
- From Count-up to Countdown: While in count-up mode, hold [NEXT] and press [CHANGE].
2.5 Countdown Timer Setting
- Enter Setup: In countdown mode, press [CHANGE]. When 'SETUP' appears, press [NEXT]. Then, press [CHANGE] to select 1 or 2 intervals.
- Set Interval Times: Press [NEXT] to edit the setup. Adjust the first interval time using [CHANGE] (minutes-seconds format). Repeat for the second interval if selected.
- Set Number of Repeats: After setting interval times, press [NEXT]. The first digit of repeats will flash. Adjust the number of repeats (0-99) using [CHANGE], then press [NEXT].
- If repeats is set to 0, it will count upwards, increasing by 1 at the end of each cycle.
- If repeats is set to 1-99, it will count downwards, decreasing by 1 at the end of each cycle.
- Set Alarm Type: After setting repeats, press [NEXT]. Press [CHANGE] to choose between Beep (high), Beep (low), Vibrate, Beep (high) + Vibrate, or Beep (low) + Vibrate.
- Set Alarm Duration: After setting alarm type, press [NEXT]. Press [CHANGE] to choose an alarm duration of 1, 2, 5, or 9 seconds.
- Exit Setup: After setting the alarm duration, press [NEXT] to exit setup.

2.6 Countdown Timer Operating Steps
- Start: Press [START]. A beep will sound to indicate the start of timing. The timer will beep at the end of the first interval before proceeding to the second, and then repeat the cycle.
- Pause: During operation, press [START] three times within 2 seconds to pause the timer. Press [START] again to resume.
- Reset: During operation, hold [START] for 3 seconds to return to the previous variable. Press [START] to resume.
- End:
- In count-up mode, it will return to the previous variable after reaching 99 repeats.
- In countdown mode, it will beep for 15 seconds when the time reaches zero, then return to the previous variable.
- To stop the alarm during countdown, press [START] once to pause for 3 seconds (it will continue to beep), then press [START] twice to stop the alarm and return to the previous variable.
2.7 Count-up Timer Operating Steps
- Switch Mode: In countdown mode, hold [NEXT] and press [CHANGE] to switch to count-up timer mode.
- Start/Pause: Press [START] to begin timing. Press [START] again to pause.
- Reset: During pausing, press [CHANGE] to reset the timer to zero.
- Display: The timer will show the date and restart counting when it reaches 99 hours, 59 minutes, 59 seconds. It will display Hour-Minute-Second 1/100 Second when the time is up to one hour.
3. Maintenance
- Keep the device away from direct sunlight or high temperatures.
- Avoid contact with corrosive liquids and impact from sharp, hard objects.
- Replace the battery promptly when the display becomes dim or weakened.
- Do not use chemical solvents like cyclohexanone or acetone to clean the product.
- Do not use the product in environments with harmful gases or explosive atmospheres.
- Avoid crushing, dropping, or getting the product wet in the rain. Maintain a dry environment.
4. Troubleshooting
- Timer not responding: Ensure the battery is correctly installed and not depleted. Replace with a fresh AAA battery if needed.
- Display is dim: This indicates a low battery. Replace the AAA battery.
- Difficulty with button presses: Ensure buttons are pressed firmly. Avoid using excessive force.
5. Specifications
| Feature | Specification |
|---|---|
| Model Number | TF6204 |
| Type | Mini, Electronic |
| Theory | Electronic |
| Use | Multifunctional (Sports, Fitness) |
| Battery Included | No (Requires 1x AAA 1.5V battery) |
| High-concerned chemical | None |
| Product Performance Standards | GBT 22778-2008 |
6. Warranty and Support
The product comes with a one-year warranty period from the date of purchase, covering malfunctions under correct storage and usage conditions, not exceeding 18 months from manufacturing. The warranty excludes the battery and physical damage.
If you encounter any malfunctions within the warranty period, please return the product accompanied by the certificate card and an inspection report or description of the defects.
For further assistance, please refer to the official user manual PDF: Leap TF6204 User Manual (PDF)
7. User Tips
- The timer is generally easy to use, offering both audible and vibration alarms for versatile training environments.
- Remember that the timer requires manual pausing during counting; it does not stop automatically.
- Always ensure you have a fresh AAA battery on hand, as one is not included with the timer.