Ezon T031

EZON T031 GPS Digital Sports Running Watch User Manual

Model: T031

Brand: Ezon

1. Introduction

The EZON T031 is a multi-functional digital sports watch equipped with a GPS receiver. Beyond standard timekeeping, calendar, and alarm functions, this watch can automatically reset its time via GPS and accurately measure various exercise metrics such as distance, pace, speed, and calories burned during your workouts. It features the ability to save and display up to 10 exercise records and boasts a long-lasting battery life.

2. Setup

2.1. Charging the Battery

To charge your watch, align the clamps of the USB charging cable with the watch. Ensure the location strip on the clamp is securely plugged into the concave area at the back of the watch, making proper contact with the electrodes. Connect the other end of the USB cable to a power source. The charging icon on the watch display will flash to indicate that charging is in progress.

Once the battery is fully charged, the charging icon will stop flashing. A complete charge from a depleted battery typically takes 2-3 hours.

EZON T031 watch connected to a USB charging cable
Figure 1: Watch connected to the USB charging cable for power.

2.2. Initial Activation

The watch is factory-set in a sleeping status to conserve battery. To activate it and display the current time, press all four buttons on the watch simultaneously. In sleeping status, the watch continues to keep time internally but does not display it on the screen.

3. Operating Instructions

3.1. Button Functions

The EZON T031 watch features four primary buttons for navigation and function control:

Diagram of EZON T031 watch with labels for LIGHT, SET, GPS, and Stopwatch/Data buttons
Figure 2: Overview of watch buttons and their primary functions.
  • LIGHT Button (Top Left): Press to activate the backlight. The display will glow for approximately 5 seconds.
  • SET Button (Bottom Left):
    • Press to view time, day of week, month-date, second, and battery level.
    • Main Menu: Press and hold the button for 2-3 seconds to enter the setting screens. Use the ▲ or ▼ buttons to scroll through options like TIME-DATE → ALARM → USER.
  • GPS Button (Top Right): Hold this button for 2-3 seconds to enter GPS mode.
  • ▲ / ▼ Buttons (Right Side): Used for navigation and scrolling through options. The top right button also serves to get to STOPWATCH mode, and the bottom right button to get to DATA mode.

3.2. GPS Functionality

The watch's built-in GPS receiver allows for accurate tracking of your exercise data. When GPS is activated, the watch can:

  • GPS Timing: Automatically reset the time based on your set city.
  • Exercise Measurement: Measure distance, pace, speed, and calories burned during your activities.
Image showing the watch with a satellite and map, illustrating GPS tracking of distance, pace, and calories
Figure 3: Built-in GPS chip for accurate exercise data, including distance, pace, and calories.

3.3. Alarm

If the alarm function is enabled, the watch will chime for approximately 20 seconds when the set alarm time is reached. You can stop the chime by pressing any button.

3.4. Stopwatch

The stopwatch function has a maximum measurement capacity of 99 hours, 59 minutes, and 59 seconds. It offers two measurement modes:

  • Count Up Timer: Standard stopwatch functionality.
  • Lap Timer: Allows you to record individual lap times.
Watch display showing stopwatch timekeeping with labels for START/STOP and LAP RECORD buttons
Figure 4: Stopwatch timekeeping interface with START/STOP and LAP RECORD functions.

3.5. Exercise Lap

The

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.