MiBoxer FUT035

Contents

MiBoxer FUT035 LED Controller User Manual

Model: FUT035 | Brand: MiBoxer

1. Introduction

The MiBoxer FUT035 LED Controller utilizes advanced 2.4GHz wireless technology, offering low power consumption, robust signal transmission, and strong anti-interference capabilities. This product features an auto-transmitting function, making it ideal for controlling lighting in various environments, including hotels and homes.

Key Features:

  • Dual White LED Light Control: Color temperature adjustable, dimmable brightness, 2.4G RF wireless transmission, signal transmitting, remote control (up to 30m distance).
  • Smartphone App & Voice Control: Supports smartphone app control and third-party voice control (requires a 2.4GHz gateway, sold separately).
  • Advanced Dimming: Offers 4096 levels of smooth dimming with no flicker.
  • PWM Frequency Switching: Supports both high and low PWM frequency switching.
  • "Do Not Disturb" Mode: Includes a power-on "Do Not Disturb" mode.
  • Scene Saving: Supports saving up to 4 custom lighting scenes.
  • Extensive Control: Compatible with up to 12 remote controls.
  • Dimming Range: 0.1% to 100% with a logarithmic dimming curve.
  • Minimum Brightness: Achieves a minimum brightness of 0.1%.

2. Specifications

AttributeValue
Product NameDual White LED Strip Controller (2.4GHz)
Model NumberFUT035
Input VoltageDC12-24V
OutputMax. 6A/Channel
Total OutputMax. 10A
RF2.4GHz
Control Distance30m
IP RateNot specified
Working Temperature-10~40°C
Output ConnectionCommon anode
MaterialPlastic
Wattage144W
Power SourceDC
CertificationCE, ROHS, CCC
OriginMainland China
Is Smart DeviceNo (but compatible with WiFi Hub)

Package Dimensions: Length: 18cm, Width: 10cm, Height: 8cm, Weight: 0.1kg

Product parameters table and packaging dimensions
Product Parameters and Packaging Information

3. Package Contents

The standard package includes:

  • 1x MiBoxer FUT035 Dual White LED Strip Controller

Note: Remote controls and WiFi gateways (e.g., WL-Box2) are sold separately and are required for full functionality.

Image of the FUT035 CCT Controller only
FUT035 CCT Controller Only

4. Setup and Wiring

Wiring Diagram:

Wiring diagram for 2.4G LED Controller showing input, output to LED strip, and optional gateway connection
2.4G LED Controller System Diagram

Connect the DC12V-24V power input to the controller and the LED strip to the output terminals as shown in the diagram. Ensure correct polarity (V+ and CW/WW).

Important Setup Notes:

  • Verify that the power supply voltage matches the requirements of the LED strip (DC12-24V). Incorrect voltage can damage the light.
  • Always ensure the power is OFF before connecting any wires to prevent short circuits or damage.
  • Non-professional users should not attempt to dismantle the lighting fixtures.
  • Avoid installing the controller in areas with large metal surfaces or strong electromagnetic interference, as this can significantly reduce the remote control distance.
MiBoxer WiFi Gateway WL-Box2 for smartphone and voice control
MiBoxer WiFi Gateway WL-Box2 (Sold Separately)
Diagram showing smartphone app and third-party voice control setup with a 2.4GHz gateway
Smartphone App and Third-Party Voice Control Setup

5. Operation

5.1. Linking Code Instructions (Pairing Remote)

  1. Switch off the light. Wait for 10 seconds, then switch it back on.
  2. Within 3 seconds of switching the light on, short press the "I" button on your remote control 3 times.
  3. The light will blink 3 times slowly, indicating successful linking.

Note: If the light does not blink slowly, linking has failed. Repeat the steps. A light that has already been linked cannot be linked again.

5.2. Unlinking Code Instructions (Unpairing Remote)

  1. Switch off the light. Wait for 10 seconds, then switch it back on.
  2. Within 3 seconds of switching the light on, short press the "I" button on your remote control 5 times.
  3. The light will blink 10 times quickly, indicating successful unlinking.

Note: If the light does not blink quickly, unlinking has failed. Repeat the steps. A light that has not been linked does not need to be unlinked.

Diagrams for linking and unlinking code instructions with a remote control
Linking and Unlinking Code Instructions

5.3. Signal Transmitting

One light can transmit signals from the remote control to another light within a 30-meter range. As long as there is another light within 30m, the remote control distance can be limitless.

Diagram illustrating signal transmitting between remote and lights
Signal Transmitting Diagram

5.4. "Do Not Disturb" Mode

This mode can be activated or deactivated via remote control, useful in areas with frequent power failures to save energy.

To Turn On "Do Not Disturb" Mode:

  1. Press the "OFF" button on the remote control three times within three seconds.
  2. Immediately after, press the "ON" button three times.
  3. The LED light will flash four times quickly, indicating successful activation.

Attention: If the light is OFF (e.g., turned off by app or remote), you must turn the power off and on twice to activate the light or use the app/remote. If the light is ON, turn the power off and on once.

To Turn Off "Do Not Disturb" Mode:

  1. Press the "ON" button on the remote control three times within three seconds.
  2. Immediately after, press the "OFF" button three times.
  3. The LED light will flash four times slowly, indicating successful deactivation.

Attention: If the user turns off "Do Not Disturb" mode, the light will always be "ON" if power is cycled (turned off and on).

5.5. PWM High Frequency / Low Frequency Switching

To Switch to High Frequency (Light ON):

  1. Short press the "OFF" button on the remote control once.
  2. Short press the "ON" button 5 times within 3 seconds.
  3. The white light will blink 2 times quickly, indicating successful switching.

To Switch to Low Frequency (Light OFF):

  1. Short press the "ON" button on the remote control once.
  2. Short press the "OFF" button 5 times within 3 seconds.
  3. The white light will blink 2 times slowly, indicating successful switching.
Image showing various compatible remote controls for the MiBoxer system
Compatible Remote Controls (Purchased Separately)
Another image showing various compatible remote controls for the MiBoxer system
Additional Compatible Remote Controls

5.6. Video Instructions

For visual guidance on smartphone app control and third-party voice control, scan the QR codes below or watch the official video:

Official product video demonstrating features and usage.
QR codes for smartphone app control and third-party voice control video instructions
Scan QR codes for video instructions on app and voice control.

6. User Tips

  • Always ensure your LED strips are compatible with CCT (Color Temperature Tunable) control for optimal performance with this controller.
  • For smart home integration (Alexa, Google Assistant), remember to purchase the MiBoxer WL-Box2 WiFi Gateway separately.
  • When linking or unlinking, precise timing of button presses is crucial. If unsuccessful, try again, paying close attention to the 3-second window.

7. Troubleshooting

  • Light not responding: Check if the power supply voltage (DC12-24V) is correct and if the cathode and anode connections are properly made. Incorrect wiring can damage the light.
  • Remote control range issues: Ensure the controller is not installed near large metal objects or sources of strong electromagnetic waves, which can interfere with the 2.4GHz signal.
  • Linking/Unlinking failure: Double-check the steps for linking/unlinking codes. Ensure the light blinks as described in the instructions. Remember, a light already linked cannot be linked again, and a light not linked does not need unlinking.
  • Light always ON after power cycle: If you have previously deactivated "Do Not Disturb" mode, the light will default to ON after a power cycle. This is normal behavior.

8. Maintenance

  • Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
  • Avoid exposing the device to moisture or extreme temperatures.
  • Do not attempt to open or repair the controller yourself. Disassembly by non-professionals can void the warranty and cause damage.

9. Warranty and Support

This product comes with a 2-year warranty from the date of purchase.

For further assistance or detailed information, please refer to the official user manual PDF:

View User Manual (PDF)

For technical support, please contact your retailer or the manufacturer directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.