METALFISH DH380

Contents

METALFISH DH380 CPU Cooler User Manual

Model: DH380

1. Introduction

The METALFISH DH380 is a low-profile CPU cooler designed for compact systems, including ITX builds. It features 4 heat pipes and a 9cm PWM fan to provide efficient cooling for various Intel and AMD processors. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.

2. Package Contents

Please verify that all components are present in the package before proceeding with installation:

  • METALFISH DH380 CPU Cooler with integrated 9cm PWM Fan
  • Intel Mounting Bracket Set
  • AMD Mounting Bracket Set
  • Fixed Nuts (4 pcs)
  • Insulation Pads (4 pcs)
  • Screws
  • Thermal Grease (12.8W)
AMD Installation Accessories
Figure 2.1: AMD Installation Accessories (Brackets, Fixed Nuts, Screws, Insulation Pads, Thermal Grease)
Intel Installation Accessories
Figure 2.2: Intel Installation Accessories (Brackets, Fixed Nuts, Screws, Insulation Pads, Thermal Grease)

3. Specifications

Key technical specifications for the METALFISH DH380 CPU Cooler:

Feature Specification
Model NumberDH380
Cooler TypeLow Profile
Cooler Size110 x 92 x 38 mm (L x W x H)
Fan Size92 x 92 x 15 mm
Heat Pipes4 heat pipes, Ø6mm
Bearing TypeFluid Bearing (Hydraulic)
Fan Speed900 - 2800 RPM ±10%
Airflow12.59 - 38.9 CFM ±10%
Air Pressure2.19
Noise Level18 - 28 dBA ±10%
Power Interface4-Pin PWM
Fan Voltage12V
TDP (Thermal Design Power)120W
Fan Life50,000 hrs
Blade Quantity9
CertificationCE, FCC, RoHS
Supported Intel SocketsLGA1851, LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA1356, LGA1366, LGA2011, LGA2066
Supported AMD SocketsAM5, AM4, AM3, AM2, FM1, FM2, FM2+
DH380 V4 Specifications Table
Figure 3.1: Detailed Specifications for DH380 V4 Cooler
Actual Cooler Height Measurement
Figure 3.2: Actual measured height of the cooler (39.65mm)

4. Setup & Installation

Follow these steps carefully to install your METALFISH DH380 CPU Cooler. Ensure your system is powered off and unplugged before beginning installation.

4.1 General Installation Steps

  1. Prepare Accessories: Identify the correct mounting bracket set (Intel or AMD) for your motherboard.
  2. Attach Insulation Pads: Stick the black insulation pads onto the 4 fixed nuts. These pads prevent short circuits and protect your motherboard.
  3. Install Socket onto Radiator: Secure the appropriate mounting socket (Intel or AMD) onto the cooler's radiator base.
  4. Clean CPU Surface: Thoroughly clean the top surface of your CPU to remove any old thermal paste or debris. Use isopropyl alcohol for best results.
  5. Apply Thermal Grease: Apply a small, pea-sized amount of the provided thermal grease to the center of your CPU's integrated heat spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it evenly.
  6. Adjust Screw Position: Place the cooler onto the CPU, aligning the mounting holes. Adjust the screw positions on the brackets to match your motherboard's mounting holes.
  7. Secure Cooler: From the back of the motherboard, tighten the four fixed nuts with insulation pads to secure the cooler. Tighten them diagonally in a cross pattern to ensure even pressure.
  8. Connect Fan Cable: Connect the 4-pin fan cable from the cooler to the CPU_FAN header on your motherboard.
  9. (Optional) Connect ARGB Cable: If you have the ARGB version of the cooler, connect the ARGB cable to a 5V+3pin ARGB header on your motherboard. Note: This step is only applicable to ARGB versions.

4.2 AMD Specific Installation Notes

For AMD motherboards, you will need to remove the original AMD CPU retention bracket from the motherboard. Keep the original backplane of the motherboard as it may be required for mounting.

AMD Installation Diagram
Figure 4.1: Step-by-step AMD Installation Diagram

4.3 Intel Specific Installation Notes

For Intel motherboards, use the provided Intel mounting bracket set.

Intel Installation Diagram
Figure 4.2: Step-by-step Intel Installation Diagram
Cooler installed in ITX case
Figure 4.3: DH380 Cooler installed in a mini-ITX system
Cooler clearance with RAM
Figure 4.4: Side view of the cooler showing clearance with RAM modules

5. Operating Instructions

Once installed, the METALFISH DH380 CPU Cooler operates automatically, controlled by your motherboard's PWM fan headers. The fan speed will adjust based on CPU temperature, ensuring optimal cooling performance while minimizing noise.

  • BIOS/UEFI Settings: You can fine-tune fan curves and monitoring settings in your motherboard's BIOS/UEFI to customize cooling performance and noise levels.
  • System Airflow: Ensure adequate airflow within your PC case. For optimal performance, especially in compact ITX cases, consider the overall case ventilation.
  • Temperature Monitoring: Use system monitoring software to keep an eye on your CPU temperatures, especially during heavy loads, to confirm effective cooling.

6. Maintenance

Regular maintenance helps prolong the life and efficiency of your CPU cooler:

  • Dust Removal: Periodically (every 3-6 months, or more frequently in dusty environments) use compressed air to clean dust from the fan blades and heatsink fins. Ensure the fan is held stationary while cleaning to prevent damage to the bearing.
  • Fan Inspection: Check the fan for any signs of wear, unusual noise, or obstructions.
  • Thermal Paste: If you remove the cooler for any reason, it is recommended to clean off the old thermal paste from both the CPU and the cooler base and apply fresh thermal paste before reinstallation.

7. Troubleshooting

If you encounter issues with your CPU cooler, refer to the following common problems and solutions:

  • High CPU Temperatures:
    • Ensure the cooler is securely mounted and making good contact with the CPU. Uneven pressure can lead to poor thermal transfer.
    • Verify that thermal paste was applied correctly and is evenly spread.
    • Check if the fan is spinning. If not, ensure it's properly connected to the CPU_FAN header and that the header is enabled in BIOS/UEFI.
    • Improve case airflow by adding or optimizing case fans, especially in small form factor cases.
    • For high TDP CPUs, consider if the 120W TDP rating of the cooler is sufficient for your CPU's actual heat output under load. Some users report effective cooling up to 60W.
  • Excessive Noise:
    • Check for dust buildup on the fan blades or heatsink fins and clean if necessary.
    • Ensure no cables are obstructing the fan's rotation.
    • Adjust fan speed curves in BIOS/UEFI to reduce maximum RPM if temperatures allow.
  • Cooler Not Fitting in Case:
    • The actual height of the cooler is approximately 39.65mm. Double-check your case's CPU cooler clearance specification.
Cinebench R23 Benchmark Results
Figure 7.1: Cinebench R23 benchmark showing performance difference with and without case cover, indicating impact of case airflow on cooling efficiency.

8. User Tips

Based on user experiences, here are some additional tips for using your DH380 cooler:

  • Verify Clearance: While advertised as 38mm, the actual measured height can be closer to 39.65mm. Always measure your case's CPU cooler clearance carefully, especially for very compact ITX builds.
  • TDP Considerations: Although rated for 120W TDP, some users find it performs optimally for CPUs with a real-world heat output closer to 60W, particularly in restrictive cases. For higher TDP CPUs, ensure excellent case airflow.
  • Mounting Pressure: Ensure the cooler is mounted with firm, even pressure. If temperatures are unexpectedly high, re-seating the cooler and checking mounting pressure can often resolve the issue.
  • AMD Backplate: When installing on AMD motherboards, remember to remove the stock AMD bracket but retain the motherboard's original backplate for cooler mounting.
  • Surface Finish: The cooler's base may have a grooved finish rather than a mirror polish. While this can be a concern for some, it has been reported to perform adequately for lower TDP CPUs (e.g., 35W).
  • Socket Compatibility: The cooler is compatible with LGA1200 sockets, sharing the same mounting distances as LGA115x. However, it may not be suitable for all LGA2011 Xeon processors due to mounting differences and potentially higher heat output.

9. Warranty & Support

For warranty information, technical support, or further assistance, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims.

A digital version of this user manual is available in PDF format. You can access it via the following link: METALFISH DH380 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.