1. Introduction
Thank you for choosing DRAGON GAUGE. This manual provides detailed instructions for the installation, operation, and maintenance of your 52mm car gauges. These gauges are designed to monitor various critical parameters of your vehicle's performance, featuring a 7-color changeable backlight for enhanced visibility and customization.
2. Product Overview
The DRAGON GAUGE series includes a variety of 52mm gauges designed for 12V gasoline vehicles. Each gauge provides precise readings for specific vehicle functions.
Available Gauge Types:
- Tachometer (0~10x1000RPM)
- Booster Gauge (-30~30PSI)
- Water Temperature Meter (40~140℃)
- Oil Temperature Meter (40~140℃)
- Oil Press Meter (0~100PSI)
- Voltmeter (8~18V)
- Air Fuel Ratio Meter (20:1~10:1)
- Exhaust Temperature Meter (3~13×100℃)
Visual Representation of Gauges:

Image: A comprehensive set of DRAGON GAUGE 52mm car gauges, showcasing their individual functions and uniform design.
7-Color Changeable Backlight:

Image: An illustration of the 7-color backlight feature, showing an oil pressure gauge illuminated in various colors.
Product Demonstration Video:
Video: A short demonstration showing the power-on sequence and the 7-color backlight changing feature of a DRAGON GAUGE tachometer.
3. Specifications
| Feature | Specification |
|---|---|
| Brand Name | DRAGON GAUGE |
| Item Width | 52MM |
| Item Weight | 0.35KG |
| Material | Plastic + metal |
| Power Compatibility | 12V Car (Gasoline vehicles) |
| Tachometer Compatibility | 4/6/8 cylinder cars only |
| Sensor Thread Size | 1/8ZG |
| Tachometer Range | 0~10x1000RPM |
| Booster Gauge Range | -30~30PSI |
| Water Temperature Meter Range | 40~140℃ |
| Oil Temperature Meter Range | 40~140℃ |
| Oil Press Meter Range | 0~100PSI |
| Voltmeter Range | 8~18V |
| Air Fuel Ratio Meter Range | 20:1~10:1 |
| Exhaust Temperature Meter Range | 3~13×100℃ |
Gauge Pod Dimensions:

Image: Dimensions of a typical gauge pod, indicating its length, width, and height for mounting purposes.
4. Setup & Installation
Proper installation is crucial for accurate readings and safe operation. Refer to the wiring diagram below for specific connections for each gauge type. A detailed user manual in PDF format is also available for further reference.

Image: Comprehensive wiring diagram illustrating the electrical connections for all DRAGON GAUGE types.
General Wiring Guidelines:
- RED Wire: Connect to Ignition Switch 12V(+)
- YELLOW Wire: Connect to Ignition Switch 12V(+) (for backlight/illumination)
- BLACK Wire: Connect to Battery(-) or a reliable chassis ground
Specific Gauge Wiring:
- Boost/Vacuum Gauge: Connect the provided nylon tubing to the sensor. The GREEN wire from the gauge connects to the sensor.
- Tachometer Gauge: The GREEN wire connects to the sensor (typically the coil or distributor signal wire). Ensure cylinder selection (1-8) is set correctly on the gauge if applicable.
- Oil/Water Temperature Gauge: The GREEN wire connects to the temperature sensor.
- Oil Pressure Gauge: The GREEN wire connects to the pressure sensor.
- Voltmeter Gauge: Follow general wiring guidelines. No additional sensor connection.
- Air Fuel/Ratio Gauge: The GREEN wire connects to the O2 Sensor Signal Wire. The BLACK wire connects to Battery(-). This gauge often interfaces with the Engine Computer Unit (EUC).
- Exhaust Gas Temperature (EGT) Gauge: The BLACK wire connects to Battery(-). The ORANGE wire connects to the ORANGE wire from the EGT sensor, and the GREEN wire connects to the GREEN wire from the EGT sensor.
Note: Always ensure all connections are secure and properly insulated to prevent short circuits. If you are unsure about any step, consult a professional automotive technician.
5. Operating Instructions
Power On:
When the ignition is turned on, the gauges will perform a self-test, and the pointer will sweep to its maximum value and return. Note that these are stepper motors, and it is normal for the pointer not to return to absolute zero when powered off.
Changing Backlight Colors:
Most DRAGON GAUGE models feature a button on the front or rear of the gauge to cycle through the 7 available backlight colors (e.g., white, blue, red, green, yellow, purple, light blue). Press the button briefly to change the color.
Alarm Function:
Certain gauges (e.g., Boost, Water Temp, Oil Temp, Oil Press, EGT) are equipped with an alarm function. When a pre-set critical threshold is reached, the gauge's backlight will flash red to alert the driver.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the gauge face. Do not use abrasive cleaners or solvents.
- Connections: Periodically check all electrical connections and sensor lines to ensure they are secure and free from corrosion.
- Sensor Integrity: Ensure sensors are free from debris or damage that could affect their accuracy.
7. Troubleshooting
- Gauge Not Powering On: Check the RED and BLACK wire connections. Ensure the ignition switch provides 12V to the RED wire and the BLACK wire has a good ground connection.
- No Backlight: Check the YELLOW wire connection to the ignition switch 12V(+).
- Inaccurate Readings: Verify the sensor connections (GREEN wire) and ensure the sensor itself is properly installed and functioning. For tachometers, confirm the cylinder setting is correct.
- Pointer Not Moving: Check all wiring connections to the gauge and its respective sensor.
8. User Tips
- Night Visibility: The 7-color changeable backlight ensures excellent visibility during nighttime driving, allowing you to select your preferred illumination color.
- Initial Setup: After installation, turn on the ignition and observe the gauge's self-test sweep to confirm basic functionality before driving.
9. Warranty & Support
For any issues not covered in this manual, or for warranty claims, please contact your seller or the DRAGON GAUGE customer support. Keep your purchase receipt as proof of purchase.