1. Safety Information
Please read and follow these safety guidelines carefully to prevent damage to the device or injury to yourself.
- When speaking, aim at the microphone capsule and maintain a distance of more than 60cm between the voice amplifier and the microphone to avoid howling.
- Do not frequently insert or unplug connectors to prevent loosening of sockets or poor connections.
- Recharge the device promptly when the battery power is low.
- It is recommended to use original accessories if replacements are needed.
- Non-professional technicians are not permitted to dismantle or repair the product. For any questions or service requirements, please contact your local agent.
- The amplifier should be stored in a dry and well-ventilated area. Avoid exposure to rain, water, or strong impacts.
- Keep the product and its accessories out of reach of children.
2. Package Contents
Ensure all items are present in your package:
- 1 x Voice Amplifier
- 1 x Wired Headset Microphone
- 1 x USB Charging Cable
- 1 x AUX Cable
- 1 x Waistband
- 1 x User Manual
3. Product Overview
Familiarize yourself with the device's components and controls:
Controls and Ports:
- Top Panel: AUX slot (3.5mm), MIC slot (3.5mm for wired MIC), DC 5V charging port (Micro USB), ON/OFF/Volume control wheel.
- Front Panel: Digital display screen, Mode (M) button, Rewind/Previous (◀◀) button, Play/Pause (►►) button, Fast Forward/Next (▶▶) button, Record (REC) button, Speaker grille.
- Right Side: Micro SD/TF card slot, USB slot (for reading data only).
- Antenna: Extendable antenna for FM radio reception.
4. Setup
4.1 Charging the Device
- Turn off the amplifier.
- Connect the Micro USB charging cable to the DC 5V charging port on the device.
- Connect the other end of the USB cable to a standard AC110-220V power supply (e.g., a phone adapter).
- The battery icon on the LCD screen will flash during charging and stop when fully charged.
- Charging time is approximately 3-4 hours.
- For best performance, ensure the device is fully charged before its first use.
- Note: All functions are stopped while the device is charging.
4.2 Connecting the Wired Microphone
- Plug the 3.5mm jack of the wired headset microphone into the "MIC" slot on the top panel of the amplifier.
- Adjust the flexible microphone boom for optimal positioning near your mouth.
5. Operation
5.1 Power On/Off and Volume Control
To turn on the amplifier, pull the volume control wheel to the "ON" position. The LCD screen will light up with a "crack" sound. Continue pulling the wheel towards "ON" to increase the volume. To decrease the volume and turn off the device, pull the wheel towards "OFF" until it clicks off.
5.2 Mode Selection
Short press the M (Mode) button to cycle through available modes: USB/TF card mode, Bluetooth mode, battery display mode, and FM radio mode.
5.3 Voice Amplification
With the device powered on and the wired microphone connected, speak into the microphone. Your voice will be amplified through the speaker. Adjust the volume wheel as needed.
5.4 Music Playback (USB/TF Card)
- Insert a TF card or USB flash drive into the corresponding slot on the right side of the amplifier.
- The amplifier will automatically begin playing music from the inserted storage device.
- Use the ◀◀ (Rewind/Previous) and ▶▶ (Fast Forward/Next) buttons to navigate through tracks.
- Short press ►► (Play/Pause) to pause or resume playback.
5.5 Audio Recording
- Ensure a wired microphone is plugged into the "MIC" port and a TF card or USB flash drive is inserted.
- Short press the REC (Record) button. A voice prompt "start recording" will indicate recording has begun.
- Short press REC again. A voice prompt "play recording" will indicate recording has stopped and the device is playing back the recorded file.
- Recorded files are automatically saved to the TF card or USB flash drive.
- To play the last recorded file without a microphone inserted, long press the REC button.
5.6 Bluetooth Connection
- Turn on the amplifier and select Bluetooth mode by pressing the M (Mode) button. The device will prompt "Bluetooth is waiting for connection" and the "blue" indicator on the screen will flash.
- On your mobile phone or other Bluetooth-enabled device, go to "Settings" and turn on Bluetooth.
- Search for "S278" in the list of available devices and connect. A "Bluetooth is connected" sound will confirm successful pairing.
- You can now play audio (teaching materials, music, etc.) from your phone through the amplifier.
5.7 TWS Bluetooth Connecting (for 2 speakers)
- Turn on two SHIDU amplifiers and set both to Bluetooth mode.
- On one of the amplifiers, long press the M (Mode) button to enter TWS pairing mode. It will connect to the other amplifier, and the "BULE" indicator on the second amplifier's screen will stop flashing.
- On your mobile phone or other Bluetooth-enabled device, search for "S278" and connect.
- Both amplifiers will now play audio from your phone simultaneously.
- To exit TWS mode, long press the M (Mode) button on either amplifier.
5.8 FM Radio
- Turn on the amplifier and extend the antenna.
- Short press the M (Mode) button to switch to FM mode. The LCD will display the FM frequency.
- Long press the ►► (Play/Pause) button to initiate automatic channel searching. The amplifier will save all found channels automatically.
- Short press the ◀◀ (Rewind/Previous) or ▶▶ (Fast Forward/Next) buttons to select saved channels.
5.9 AUX Input
Connect the amplifier to an external audio device (computer, cellphone, MP3/MP4 player) using the provided AUX cable. The amplifier will play audio from the connected device when the LCD screen shows "LINE" with the voice prompt "Audio In mode".
6. Maintenance
- Keep the amplifier in a dry and well-ventilated area.
- Avoid exposing the device to rain, water, or strong impacts.
- Clean the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Store the device and accessories away from children when not in use.
7. Troubleshooting
- Howling/Feedback: Ensure the microphone capsule is aimed correctly and kept at least 60cm away from the amplifier speaker.
- Poor Connection/Loose Socket: Avoid frequently inserting and unplugging connectors. If issues persist, check for damage to the ports or cables.
- Low Battery: Recharge the device promptly when the battery indicator shows low power.
- Device Malfunction: If the device is not working correctly, and you are not a professional technician, do not attempt to dismantle or repair it. Contact your local agent for assistance.
8. Specifications
| Feature | S278 Model | S298 Model |
|---|---|---|
| Output Power | 15W | 15W |
| Frequency Response | 90Hz-18KHz | 90Hz-18KHz |
| Output Impedance | 4Ω | 4Ω |
| Work Temperature | -10℃ - 45℃ | -10℃ - 45℃ |
| Charging Voltage | DC 5V-1A | DC 5V-1A |
| Amplify Time (50% Volume) | 6H-8H | 6H-8H |
| Music Play Time | 4H-6H | 4H-6H |
| Charging Time | 3H-4H | 3H-4H |
| Battery Capacity | 2500mAh | 2000mAh |
| Dimensions (WxHxD) | 10.5cm*8.6cm*3.5cm | 116*85*40mm |
| Weight | 204g | 263g |
| Support MP3 | Yes | Yes |
| Support MP4 | No | No |
| Voice Record | Yes | Yes |
| Wireless Distance | 30-35m | 30-35m |
| Sound Coverage | 800㎡ (1000 sq.ft) | 800㎡ (1000 sq.ft) |
9. User Tips
- The device offers long battery life, with up to 6-8 hours of amplification and 4-6 hours of music playback.
- The wired microphone features a flexible, adjustable boom for comfortable and optimal positioning.
- Always ensure the device is fully charged before initial use to maximize battery performance.
- While the microphone stick is flexible, handle it with care as it may become soft over extended use.
10. Warranty and Support
SHIDU guarantees 100% product satisfaction and offers a 1-year warranty for this device.
If you have any questions or require service, please contact your local SHIDU agent or the seller for assistance. They will strive to provide the best possible service.
11. Product Video Overview
Watch this video for a detailed overview of the SHIDU Portable Voice Amplifier, including its features and accessories.