1. Introduction
The NXB-63 Miniature Circuit Breaker (MCB) is designed to provide reliable protection for electrical circuits against overloads and short-circuits. This device ensures the safety of electrical installations and equipment by automatically disconnecting the power supply when a fault is detected. The NXB-63 series features a robust design, easy installation, and clear operational indicators, making it suitable for various residential, commercial, and industrial applications.
2. Safety Information
- Installation and maintenance should only be performed by qualified electricians.
- Always disconnect the main power supply before installing, inspecting, or performing any work on the circuit breaker or associated wiring.
- Ensure the circuit breaker's specifications (voltage, current, breaking capacity) match the requirements of your electrical system.
- Do not operate the circuit breaker with wet hands or in damp conditions.
- Never bypass or tamper with the circuit breaker's protective mechanisms.
- Ensure proper grounding where required.
3. Product Overview
3.1. Components
The NXB-63 Miniature Circuit Breaker is engineered with several key components to ensure effective circuit protection:

- Overload Protection Metal Sheet: Detects sustained overcurrents and triggers the trip mechanism.
- Contact Group: The main electrical contacts that open and close the circuit.
- Mechanical Locking Device: Ensures stable ON/OFF positions and prevents accidental switching.
- Rapid Arc Extinguishing System: Quickly quenches the electrical arc formed during circuit interruption, minimizing damage and ensuring safety.
- Short-Circuit Protection Electromagnetic Release: Responds rapidly to high short-circuit currents, causing immediate tripping.
3.2. Dimensions
The NXB-63 series is available in various pole configurations, each with specific dimensions for installation:

| Poles | Width (mm) | Height (mm) |
|---|---|---|
| 1P (Single Pole) | 18 | 81 |
| 2P (Double Pole) | 36 | 81 |
| 3P (Triple Pole) | 54 | 81 |
| 4P (Four Pole) | 72 | 81 |
4. Setup and Installation
The NXB-63 circuit breaker is designed for rail installation and utilizes a pressure plate wiring board for secure connections.
4.1. Installation Method
The circuit breaker is designed for standard DIN rail mounting. Ensure the rail is securely fastened within the electrical panel.
4.2. Wiring Instructions
Follow the wiring diagram carefully to ensure correct and safe installation. Use appropriate wire gauges for the rated current.

- Connect the Live (Fire) wire to the designated input terminal.
- Connect the Neutral (Zero) wire to the designated input terminal.
- Ensure proper connection to the Neutral row and Ground bar as per your electrical system's requirements.
- Tighten all terminal screws firmly to prevent loose connections, which can cause overheating or arcing.
5. Operating Instructions
The NXB-63 circuit breaker features a D-shaped handle for comfortable and sensitive operation, along with a visualization panel for clear status indication.
- Turning ON: Push the D-shaped handle upwards to the "ON" position. The visualization panel will indicate the ON status.
- Turning OFF: Push the D-shaped handle downwards to the "OFF" position. The visualization panel will indicate the OFF status.
- Tripping: In case of an overload or short-circuit, the circuit breaker will automatically trip, moving the handle to an intermediate or OFF position. This indicates a fault in the circuit.
6. Maintenance
The NXB-63 circuit breaker is designed for minimal maintenance. However, regular visual inspections are recommended to ensure optimal performance and safety.
- Keep the circuit breaker and its surroundings clean and free from dust and debris.
- Ensure the electrical panel remains dry and free from moisture.
- Periodically inspect the circuit breaker for any signs of physical damage, discoloration, or loose connections.
- Do not attempt to repair a damaged circuit breaker; replace it with a new one that matches the original specifications.
7. Troubleshooting
If the circuit breaker trips, it indicates a fault condition in the protected circuit. Follow these steps:
- Identify the Cause: Before resetting, try to identify and rectify the cause of the trip (e.g., overloaded appliance, short-circuit in wiring).
- Disconnect Appliances: Unplug or switch off all appliances connected to the affected circuit.
- Reset the Breaker: Push the handle fully to the "OFF" position, then push it firmly to the "ON" position.
- Monitor: If the breaker trips again immediately, do not attempt to reset it repeatedly. There is a persistent fault that requires professional attention.
- Professional Help: If you cannot identify or resolve the fault, contact a qualified electrician.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TAIYEDQ |
| Model Number | NXB-63 (CHNT Series) |
| Type | Miniature Circuit Breaker (MCB) |
| Product Features | Type C |
| Poles Number | 1P, 2P, 3P, 4P |
| Rated Voltage | 230V~ (1P), 400V~ (2P, 3P, 4P) |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Rated Current | 1A, 2A, 3A, 6A, 10A, 16A, 20A, 25A, 32A, 40A, 63A |
| Frequency | 50Hz |
| Breaking Capacity | 6000A |
| Standard | IEC60898-1, GB10963.1 |
| Function | Overload and Short-Circuit Protection |
| Installation Method | Rail Installation |
| Wiring Mode | Pressure Plate Wiring Board |
| Is Smart Device | Yes |
| Origin | Mainland China |
| Certification | NONE |
9. User Tips
- Always verify the voltage and current ratings of the circuit breaker match your specific application before installation.
- For optimal safety, consider having your electrical system inspected periodically by a certified professional.
10. Warranty and Support
For warranty information, technical support, or any inquiries regarding your NXB-63 Miniature Circuit Breaker, please contact the seller or manufacturer directly. Keep your purchase records for reference.
A PDF user manual is available for download from the seller's product page for additional details and diagrams.