EURS TL-3014-144SMD

Contents

EURS 144SMD LED Automotive Signal Light User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your EURS 144SMD LED Automotive Signal Lights. Please read it thoroughly before installation and operation. For a downloadable version of this manual, please refer to the official PDF document.

These LED bulbs are designed for various automotive lighting applications, including turn signals, brake lights, reverse lights, and daytime running lights (DRL). They feature a high-brightness 3014 SMD LED chip configuration for enhanced visibility and a long service life.

Three EURS LED bulbs showing white, amber, and red light output
Figure 1: EURS 144SMD LED Automotive Signal Lights in various colors.

2. Warning & Safety Information

  • Disconnect Power: Always disconnect the vehicle's power supply before installation to prevent electric shock.
  • Eye Protection: Avoid direct eye exposure to the light to prevent eye injury.
  • Vehicle Motion: Do not replace the headlight while the vehicle is in motion.
  • Wiring Modifications: Do not arbitrarily modify wiring connections.
  • Environmental Conditions: Avoid use in high-temperature or humid environments.
  • Disassembly: Non-professionals must not disassemble the unit.

3. Setup and Installation

3.1. Bulb Types and Compatibility

These LED bulbs are available in several common automotive base types. Ensure you select the correct type for your vehicle.

Comparison of 7440 and 1156 bulb types with pin angle diagrams
Figure 2: Common bulb base types (7440, 1156) and pin angle variations.

Available base types include:

  • 1156 BA15S P21W
  • 1156 BAU15S PY21W
  • 1157 BAY15D
  • T20 7440
  • T20 7443

3.2. Installation Instructions

  1. Turn Off Power: Turn off the vehicle's power supply before beginning the installation.
  2. Access Lamp Housing: Carefully access the lamp housing where the bulb is to be replaced. Refer to your vehicle's service manual for specific instructions on accessing the bulb.
  3. Remove Old Bulb: Gently remove the existing bulb from its socket.
  4. Insert New LED Bulb: Insert the new EURS LED bulb into the socket. Ensure it is seated firmly and correctly.
  5. Secure Housing: Secure the lamp housing back into its original position.
  6. Test Functionality: After connecting the power supply, test the light to verify normal operation (e.g., turn signals, brake lights, reverse lights).

4. Operating Instructions

These LED bulbs are designed for plug-and-play operation. Once correctly installed, they will function as direct replacements for your vehicle's original incandescent bulbs. They offer fast response times and bright illumination for improved driving safety.

Three illuminated LED bulbs showing white, yellow, and red light
Figure 3: Bright and clear illumination in white, amber, and red.

5. Maintenance

EURS LED bulbs are designed for durability and long life, requiring minimal maintenance. To ensure optimal performance:

  • Keep Clean: Periodically check and clean the lamp housing and bulb surface to ensure maximum light output. Use a soft, dry cloth.
  • Avoid Physical Damage: Protect the bulbs from impacts or excessive force during handling or installation.
  • Regular Inspection: Occasionally check the functionality of your signal lights to ensure they are operating correctly.

6. Troubleshooting (FAQs)

Q: The light does not illuminate.
A: Check whether the power connection is secure and functional. Ensure the bulb is correctly seated in the socket.
Q: The light flickers or flashes too quickly (hyper-flashing).
A: This may indicate poor electrical contact in the wiring or a CANbus incompatibility issue. For some vehicles, an additional load resistor may be required to resolve hyper-flashing or dashboard error messages.
Q: The bulb lens is cracked or damaged.
A: Replace with a new lamp assembly.

7. Specifications

FeatureSpecification
Product NameAutomotive Signal Light
ModelTL-3014-144SMD
BrandEURS
Light Source TypeLED (3014 SMD, 144 chips)
VoltageDC 12V (Output: 12V * 1.75A)
Wattage15W
Lumens1000Lm (up to 2100 lm stated in some descriptions)
Color Temperature3000K ~ 6000K
Beam Angle360 Degrees
FunctionConstant current / Nonpolarity
Interface Types1156 BA15S P21W, 1156 BAU15S PY21W, 1157 BAY15D, T20 7440, T20 7443
Item Weight17g
Waterproof RatingIP68
OriginMainland China
Dimensions of 1156 and 7440 bulb types
Figure 4: Bulb dimensions for 1156 (left) and 7440 (right) types.

8. User Tips

  • Hyper-Flashing/Error Messages: If your vehicle experiences hyper-flashing (turn signals blinking too fast) or displays dashboard error messages after installing these LED bulbs, it indicates a CANbus incompatibility. You may need to install an additional load resistor for each LED bulb to resolve this issue.
  • Stabilization Period: Some users have noted that the turn signal speed stabilizes after the bulb has been left on for approximately 1 minute. If you experience initial rapid flashing, allow the bulb to operate for a short period to see if it self-corrects.
  • Brightness Expectations: While these are high-brightness LEDs, some users find the light output to be less intense than expected, especially when compared to certain halogen bulbs or other LED types. Consider your specific brightness needs before purchase.
  • Base Type Verification: Always double-check your vehicle's required bulb base type (e.g., 1156 BA15S P21W, 1156 BAU15S PY21W, 1157 BAY15D, T20 7440, T20 7443) before ordering to ensure proper fitment.

9. Warranty & Support

9.1. After-Sales Service

Free repair service is provided within 6 months for non-man-made defects. Please retain your proof of purchase for warranty claims.

9.2. Further Assistance

For any further questions or support, please contact your retailer or the manufacturer directly. You can also refer to the comprehensive User Manual PDF for additional details.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.