ZSDTRP L-566

Contents

ZS MOTOS Motorcycle Exhaust Pipe Muffler Mounting Spring Hooks Instruction Manual

Model: L-566

1. Introduction

This manual provides instructions for the installation, use, and maintenance of the ZS MOTOS 13-piece set of Motorcycle Exhaust Pipe Muffler Mounting Spring Hooks. This product is designed for universal motorcycle applications, specifically for connecting exhaust mufflers to 51MM or 61MM link pipes. Made from high-quality stainless steel, these components ensure durability and reliable performance.

2. Safety Information

WARNING:

  • When repairing motorcycles, always wear safety goggles and nitrile gloves to prevent damage from debris and chemicals.
  • Ensure the motorcycle is maintained on a flat, horizontal surface during installation or repair.
  • Allow the engine and exhaust system to cool completely before beginning any work to prevent burns.

3. Package Contents

The ZS MOTOS 13-piece set includes the following components:

  • 4 x Exhaust Muffler Springs (various types/colors)
  • 8 x Exhaust Spring Hooks (U-shaped)
  • 1 x Black Spring Hook Tool
Image showing the 13-piece set including springs, U-shaped hooks, and a spring hook tool.
Figure 1: Overview of the 13-piece spring and hook set.

4. Specifications

FeatureDetail
Brand NameZSDTRP
Model NameL-566
Item NoSCL-2019110038
MaterialStainless Steel
Motobike MakeUniversal
Special FeaturesConnect exhaust
External Testing CertificationISO9001
Item Weight0.22 kg
Spring Hook Tool Length17.4 cm
Spring Hook Tool Width8.4 cm
Spring Hook Tool Height3 cm

Spring Dimensions and Types:

Diagram showing different spring types (A01, A02, A03, A04, B01) with their normal and total lengths.
Figure 2: Spring types and dimensions.
TypeCrafts/ColorNormal LengthTotal Length
A01Plating35mm60mm
A02Full Blue35mm60mm
A03Half Blue35mm60mm
A04Full Color35mm60mm
B01Plating50mm75mm
Diagram showing the dimensions of the black spring hook tool: 84mm width and 174mm length.
Figure 3: Dimensions of the Spring Hook Tool.

5. Setup and Installation

The ZS MOTOS exhaust springs and hooks are designed for straightforward installation. Follow these general steps:

  1. Preparation: Ensure the motorcycle engine and exhaust system are completely cool. Place the motorcycle on a stable, flat, and horizontal surface. Wear safety goggles and nitrile gloves.
  2. Identify Mounting Points: Locate the spring mounting points on your motorcycle's exhaust pipe and muffler.
  3. Attach U-shaped Hooks: If your exhaust system requires them, attach the U-shaped exhaust spring hooks to the designated points.
  4. Position Spring: Hook one end of the exhaust spring onto the mounting point on the exhaust pipe or muffler.
  5. Use Spring Hook Tool: Use the provided black spring hook tool to stretch the spring. Hook the tool into the free end of the spring.
  6. Secure Spring: Carefully pull the spring with the tool to stretch it and attach the free end to the corresponding mounting point on the other exhaust component. Ensure the spring is securely seated.
  7. Repeat: Repeat the process for all necessary springs.
Image demonstrating the use of the spring hook tool to install an exhaust spring onto a motorcycle exhaust pipe.
Figure 4: Using the spring hook tool for installation.

6. Maintenance

These stainless steel springs and hooks are designed for durability and require minimal maintenance. Periodically inspect them for signs of wear, corrosion, or damage. Replace any components that appear compromised to ensure the integrity of your exhaust system.

7. Troubleshooting

If you encounter any issues during installation or use, please ensure all components are correctly aligned and securely fastened. If a spring appears too short or too long, double-check the specifications against your motorcycle's requirements. For persistent issues, contact customer support.

8. User Tips

  • Verify Dimensions: Some users have noted that the pieces can appear small. Always verify the spring lengths (Normal and Total Lengths) and hook dimensions against your specific motorcycle's requirements before installation to ensure a proper fit.
  • Check Package Contents: The set includes 4 springs, 8 U-shaped hooks, and 1 spring hook tool. Ensure all 13 pieces are present upon receipt.
  • Tool Use: The spring hook tool is essential for safe and easy installation. Do not attempt to stretch springs by hand.

9. Support

For any questions or assistance, please contact the seller online. We aim to provide the most satisfactory service and will respond to your inquiries as soon as possible.

A user manual in PDF format is also available for detailed reference. You can find it at the following link: ZS MOTOS Exhaust Spring Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.