fenvi AX200/AX210

Contents

fenvi Wireless Wifi Card AX200/AX210 User Manual

Model: AX200/AX210

Brand: fenvi

1. Introduction

The fenvi Wireless Wifi Card AX200/AX210 is an advanced network adapter designed to upgrade your laptop's wireless capabilities. Supporting Wi-Fi 6 (802.11ax) technology, it offers ultra-fast speeds and enhanced performance for a seamless connected experience. This adapter also integrates Bluetooth 5.2 for reliable wireless peripheral connectivity.

fenvi AX200 Wireless Card and Adapter Overview
fenvi AX200 Wireless Card and Adapter Overview, highlighting Wi-Fi 6, 2974Mbps speed, and Bluetooth 5.2.
Wi-Fi 6 AX200 Key Features
Key features of the Wi-Fi 6 AX200, including 6th Gen Wi-Fi, 2.4G/5GHz, Bluetooth 5.0, 2974Mbps Wi-Fi Speed, and 160MHz Bandwidth.

2. Safety Information

Before proceeding with installation, please read and understand the following safety precautions:

  • Always power off your PC and disconnect it from the power source before installing or removing any internal components.
  • Discharge any static electricity from your body by touching a grounded metal object (e.g., your PC's metal chassis) before handling the wireless card.
  • Handle the wireless card by its edges to avoid touching the gold connectors or components.
  • Ensure the PC is completely closed after installation to prevent short circuits.

3. Package Contents

Verify that all items are present in your package:

  • fenvi Wireless Wifi Card (AX200 or AX210)
  • Mini PCI-E to M.2 Adapter
  • Screwdriver
  • Antennas (typically 2)
  • Mounting Screws
Package Contents of fenvi Wireless Wifi Card
Illustration of typical package contents, including the wireless card, adapter, screwdriver, antennas, and screws.

4. Specifications

Feature Description
Model Wi-Fi 6 AX200 / AX210
Interface Mini PCI-E (via M.2 NGFF to Mini PCI-E adapter)
Dual Band 2.4GHz / 5GHz (160MHz)
Max Speed Up to 2974Mbps (574Mbps on 2.4GHz + 2400Mbps on 5GHz, requires 160MHz router)
Wireless Standard 802.11ax (Wi-Fi 6), 802.11ac
Bluetooth Version Bluetooth 5.2
Antenna Diversity Supported
Application Laptop
Heat Dissipation No support
Origin Mainland China
Wi-Fi Generation Speed Comparison
Comparison of Wi-Fi speeds across generations: 6th Gen (2974Mbps), 5th Gen (1200Mbps), and 4th Gen (300Mbps).
160MHz Bandwidth Lane Analogy
Visual analogy demonstrating the increased bandwidth of 160MHz compared to 80MHz, 40MHz, and 20MHz.

5. Compatibility

This wireless card is designed for laptops with a Mini PCI-E slot, utilizing an M.2 NGFF card with an adapter.

Supported Systems:

  • Laptops with Mini PCI-E slot from brands such as Samsung, Dell, Sony, ACER, ASUS, MSI, Clevo, Terransforce, Hasee, etc.
  • Operating Systems: Microsoft Windows 10 64-bit, Windows 11 64-bit, Linux.

Unsupported Systems:

  • Windows 7, Windows 8, Windows 8.1.
  • IBM/Thinkpad/Lenovo/HP laptops (unless the BIOS whitelist can be modified, particularly for models from 2016 onwards).
  • Systems that do not support CNVIO interface.
Compatibility with Windows 10 64-bit
The AX200 card with adapter is compatible with Windows 10 (64-bit).
NGFF to Mini PCI-E Adapter for Laptops
Visual representation of the NGFF to Mini PCI-E adapter for laptop integration.

6. Installation Guide

6.1 Physical Installation

  1. **Prepare your laptop:** Power off your laptop completely and disconnect the power adapter. Remove the battery if possible. Open the laptop's back panel to access the Mini PCI-E slot.
  2. **Insert the M.2 card into the adapter:** Carefully insert the AX200/AX210 M.2 wireless card into the M.2 slot on the Mini PCI-E adapter.
  3. Step 1: Inserting the M.2 Card into the Mini PCI-E Adapter
    Step-by-step diagram showing the insertion of the M.2 wireless card into the Mini PCI-E adapter.
  4. **Connect antennas:** Attach the provided antennas to the MHF4/IPEX UFL connectors on the wireless card. Ensure a secure connection.
  5. Step 2: Connecting Antennas to the Installed Card
    Diagram illustrating the connection of laptop antennas to the MHF4 and IPEX UFL interfaces on the wireless card within the adapter.
  6. **Install the adapter:** Plug the assembled Mini PCI-E adapter into the laptop's Mini PCI-E slot. Secure it with the provided screw.
  7. **Adjust adapter length (if necessary):** The Mini PCI-E adapter may have a breakable section to adjust its length if it's too long for your laptop's slot. Break it carefully if needed.
  8. Mini PCI-E Adapter with Breakable Section for Length Adjustment
    Diagram showing the Mini PCI-E adapter with a designated breakable section for length adjustment.
    Dimensions of the Mini PCI-E Adapter
    Detailed dimensions of the Mini PCI-E adapter (30mm x 51mm, 27mm) with interface labels.
  9. **Close the laptop:** Reassemble your laptop's back panel and reconnect the battery and power adapter.

6.2 Driver Installation

After physical installation, you will need to install the appropriate drivers for your operating system.

  1. **Initial Check:** Boot your PC. Go to Device Manager. Check for any hidden devices and disable all previous wireless drivers to avoid conflicts.
  2. **Download Drivers:**
  3. **Install Drivers:** Follow the on-screen instructions to install the downloaded drivers.
  4. **Restart PC:** After installation, restart your PC to apply the changes.

7. Operating Instructions

7.1 Wi-Fi Connectivity

Once drivers are installed, your system should detect the new Wi-Fi adapter. You can connect to Wi-Fi networks as you normally would through your operating system's network settings.

  • Ensure your router supports Wi-Fi 6 (802.11ax) and 160MHz bandwidth to achieve maximum speeds.
  • The card supports both 2.4GHz and 5GHz bands. For higher speeds and less interference, connect to a 5GHz network if available.
Wi-Fi Speed Test Example (2.4Gbps)
Example of a Wi-Fi speed test showing speeds up to 2.4Gbps with a 160MHz router.

7.2 Bluetooth Connectivity

The integrated Bluetooth 5.2 allows you to connect various Bluetooth devices such as headphones, mice, keyboards, and more.

  • Enable Bluetooth in your operating system settings.
  • Put your Bluetooth device into pairing mode.
  • Search for and select your device from the list of available Bluetooth devices to pair.
Bluetooth 5.2 Feature
Visual highlighting of the Bluetooth 5.2 feature for faster and farther coverage.

8. Troubleshooting

8.1 Wi-Fi or Bluetooth Not Working

  1. **Driver Reinstallation:** If Wi-Fi or Bluetooth is not detected or functioning, try reinstalling the drivers. Ensure all previous network adapter drivers are uninstalled before installing the new ones.
  2. **Pin Shielding:** In some cases, if Bluetooth or Wi-Fi does not work, you may need to shield a specific pin on the wireless network card using tape. This is a delicate procedure and should be done carefully to avoid damaging the card.
    Pin Shielding for Bluetooth Functionality
    Diagram indicating the pin to shield on the wireless card for resolving Bluetooth issues. (Refer to image for exact pin location).
    Pin Shielding for Wi-Fi Functionality
    Diagram indicating the pin to shield on the wireless card for resolving Wi-Fi issues. (Refer to image for exact pin location).

8.2 No Wi-Fi Signal

  1. **Secure Insertion:** Check if the network adapter is securely inserted into the laptop's slot. If there is any looseness, reinsert it firmly.
  2. **Clean Contacts:** Ensure the gold fingers of the network card are in good contact with the socket. Gently wipe the gold contacts to remove any foreign objects, then plug the adapter back into the socket.
  3. **Antenna Connection:** Verify that the antennas are correctly and securely connected to the wireless card.

9. User Tips

  • **Performance Boost:** Users have reported significant speed improvements, going from 80Mbps to over 800Mbps after installation.
  • **Linux Compatibility:** The card is generally plug-and-play on Linux systems with appropriate firmware.
  • **mSATA Drive Conflict:** Be aware that this adapter may not fit alongside an mSATA drive in some laptops. You might need to remove the mSATA drive for the wireless card to seat fully and function correctly.
  • Wireless Card and Adapter Components
    Components of the wireless card and adapter, including the card, adapter board, antennas, and screwdriver.
    Example of Installed Wireless Card in a Laptop
    An example of the wireless card installed within a laptop chassis, showing antenna connections and proximity to other components.

10. Support

For further assistance or technical support, please refer to the fenvi official website or contact their customer service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.