DooerTak X96Q

Contents

X96Q Android 10.0 Smart TV Box User Manual

Model: X96Q | Brand: DooerTak

X96Q Android TV Box top view

Top view of the X96Q Android TV Box.

1. Important Safety Information

Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or damage to the device.

  • DO NOT open the device casing. There are no user-serviceable parts inside. All repairs must be performed by qualified personnel. Unauthorized opening may void the warranty.
  • Do not expose the set-top box (STB) or power adapter to rain, moisture, humidity, or extreme temperatures.
  • Recommended operating temperature range: 0°C-40°C.
  • Storage temperature range: -20°C-60°C.
  • Use only the provided power adapter with the following specifications: Input: 100-240V~50/60Hz; Output: DC 12V/2A. Using unapproved or mismatched power adapters may cause damage.
  • Keep the device away from heat sources (e.g., radiators, stoves, candles) and ensure adequate ventilation (maintain a 10cm gap around the device) to prevent overheating.
  • Disconnect the power supply from the wall outlet before cleaning. Wipe with a dry, soft, lint-free cloth. Do not use liquid cleaners, aerosol cleaners, or abrasive materials.
  • Adult supervision is required during setup and use if children are present. Small parts (e.g., remote control batteries) pose a choking hazard. Keep them out of reach of children under 36 months old. Seek medical attention immediately if a battery is swallowed.
  • Stop using the device immediately if you notice smoke, strange odors, abnormal noises, or overheating. Disconnect the power adapter and contact customer support.
  • Do not place heavy objects on the device or its cables. Avoid pulling, bending, or damaging the power cable and HDMI cable to prevent short circuits.
  • This product is intended for indoor use only; do not use it outdoors or in damp environments (e.g., bathrooms, kitchens).

2. Product Overview

2.1 Key Features

  • Operating System: Android 10.0
  • Processor: Allwinner H313 Quad Core ARM Cortex A53
  • GPU: G31 OPenGL3.2
  • Memory (RAM): 1GB or 2GB DDR3 options
  • Internal Storage (ROM): 8GB or 16GB eMMC options
  • Video Output: Supports 4K@60fps, HEVC H.265
  • Connectivity: 2.4G Wi-Fi, 100M Ethernet
  • Supported Internet Services: NETFLIX, YouTube
  • Additional Features: GOOGLE Cast, Remote Control Included

2.2 Package Contents

X96Q TV Box package contents

Illustration of the items included in the X96Q TV Box package.

The package typically includes:

  • X96Q Device (Smart TV Box)
  • Remote Control (Batteries not included)
  • Power Supply Adapter
  • HD Data Cable (HDMI Cable)
  • User Manual (This document, also available as a PDF)

2.3 Device Layout and Interfaces

X96Q TV Box interface diagram

Diagram showing the various ports and interfaces on the X96Q TV Box.

  1. DC: Power line interface for connecting the power adapter.
  2. ETHERNET: Network cable interface (RJ45) for wired internet connection.
  3. HDMI: HDMI cable interface for video and audio output to a TV or monitor.
  4. AV: Plug in the AV cable (not included) to connect to older TVs.
  5. IR: IR cable interface for external IR receiver (if applicable).
  6. USB: USB interface for connecting USB flash drives or external hard drives.
  7. USB: Another USB interface.
  8. CARD: Card slot for TF cards up to 64GB.

2.4 Android 10 Performance

Android 10 performance comparison chart

Data analysis chart comparing Android 10 with previous versions in terms of Fluency, Safety, Stability, Running Speed, and Memory Space.

The X96Q TV Box runs on Android 10, which offers significant optimizations:

  • Fluency: Native support for Vulkan 3D technology and optimized UI for drawing, resulting in higher efficiency and lower load.
  • Safety: File encryption technology based on Google Adiantum algorithm, enabled by default to avoid data leakage caused by Flash.
  • Stability: Smarter background memory management (LMKD-PSI) for faster killing processes, making foreground processes less affected.
  • Running Speed: Virtual machine code optimization to improve execution efficiency.
  • Memory Space: New dynamic partitioning technology for flexible allocation of Flash partitions, saving storage space.

3. Setup Guide

Follow these steps to set up your set-top box quickly. Ensure all connections are secure before powering on the device.

3.1 Hardware Connection

  1. Remote Control Batteries: Open the battery compartment of the remote control, insert 2 AAA batteries, ensuring correct positive (+) and negative (-) polarities. Close the compartment securely.
  2. HDMI Connection: Connect one end of the HDMI cable to the HDMI OUT port on the STB and the other end to the HDMI IN port on your TV/monitor.
  3. Ethernet Connection (Optional): Connect one end of an Ethernet cable to the LAN port on the STB and the other end to your router for a stable wired internet connection. If using Wi-Fi, skip this step and configure it later in the setup wizard.
  4. Power Connection: Connect the power adapter to the DC IN port on the STB, then plug the other end of the adapter into a grounded wall outlet.
  5. Power On: Power on the STB by pressing the Power button on the device or the remote control. Power on your TV and switch its input source to the HDMI port connected to the STB (e.g., HDMI 1, HDMI 2) using the TV's remote control.

3.2 Initial Configuration (Setup Wizard)

The STB will boot up automatically and display the setup wizard on your TV screen. Follow the on-screen prompts to complete the initial configuration.

  1. Language Selection: Choose your preferred language (e.g., English, German, French, Spanish, Italian) from the dropdown menu.
  2. Internet Connection:
    • If using wired internet: The device will connect automatically (DHCP enabled by default).
    • If using Wi-Fi: Select your Wi-Fi network from the list of available networks, enter the Wi-Fi password (case-sensitive), and tap "Connect" to establish the connection.
  3. System Update: If a firmware update is available, the device will prompt you to download and install it. Click "Update Now" and do not power off the device during the update (this may take 2-5 minutes).
  4. Remote Control Pairing (If Applicable): If your remote control supports Bluetooth pairing, follow the on-screen instructions to pair it with the STB. For IR remotes, no pairing is required.
  5. Complete Setup: After configuring all settings, the STB will redirect you to the main menu. You can now start using the device.

4. Operating Instructions

4.1 Remote Control Buttons & Functions

Button Function
Power Turns the STB on or off (enters standby mode when turned off).
Home Returns to the main menu from any screen.
Back Goes back to the previous screen or exits the current menu.
Navigation (↑↓←→) + OK Uses the navigation buttons to select options; press OK to confirm your selection.
Volume +/- / Mute Adjusts the TV volume; press Mute to turn off audio temporarily.
Number Keys (0-9) Directly inputs channel numbers (for live TV apps that support channel number input).
Menu Accesses the device's settings menu and advanced options.
Play/Pause / Stop Controls media playback (for local media or VOD content).

4.2 Main Functions

  • Live TV: Open the pre-installed live TV app to stream live channels (internet connection required).
  • Video-on-Demand (VOD): Watch movies, TV shows, and other on-demand content through VOD apps.
  • Media Player: Open the Media Player app to play local media files (MP4, MKV, MP3, JPG, etc.) from USB devices connected to the USB port.
  • Settings: Adjust network, display, audio, and system preferences (see Section 5 for details).

5. Advanced Settings

Access advanced settings by pressing the "Menu" button on the remote control and selecting "Settings" from the main menu.

5.1 Network Settings

  • Wi-Fi: View available Wi-Fi networks, connect to a new network, forget a saved network, or adjust Wi-Fi signal strength.
  • Wired (LAN): Configure IP settings (DHCP by default; static IP can be set manually if needed).
  • Network Status: Check internet connection status, IP address, subnet mask, gateway, and DNS server.

5.2 Display Settings

  • Resolution: Select the appropriate resolution (1080p@60fps, 4K@60fps, etc.) based on your TV's capabilities. "Auto" is recommended for automatic resolution matching.
  • Screen Size: Adjust the screen size to fix overscan or underscan issues (if the image is cut off on the edges of the TV).
  • HDR Mode: Enable or disable HDR (High Dynamic Range) for better image quality (supported TVs only).

5.3 Audio Settings

  • Audio Output: Select the audio output mode (HDMI, AV, or Optical, if applicable).
  • Audio Language: Select the default audio track language for supported content (if multiple languages are available).
  • Volume Control: Adjust the device's volume level (independent of TV volume).

5.4 System Settings

  • System Update: Check for and install the latest firmware updates manually (automatic updates are enabled by default).
  • Factory Reset: Erase all user data (apps, settings, passwords) and restore the device to its factory defaults. Note: Back up important data before performing a factory reset.
  • About Device: View device model, serial number, firmware version, MAC address, and other device information.
  • Sleep Mode: Set the device to enter standby mode automatically after a period of inactivity (5 minutes, 10 minutes, 30 minutes, or never).

6. Troubleshooting Common Issues

If you encounter problems while using the set-top box, refer to the following troubleshooting guide before contacting customer support. Most issues can be resolved quickly with simple steps.

Issue Troubleshooting Steps
No power, LED indicator not lit
  1. Check if the power adapter is securely connected to the STB's DC IN port and the wall outlet.
  2. Test the wall outlet with another device to ensure it is working.
  3. Check if the power adapter is damaged; replace it with the provided one if necessary.
No picture on TV
  1. Confirm the TV's input source is set to the correct HDMI port (e.g., HDMI 1).
  2. Reconnect the HDMI cable to both the STB and the TV.
  3. Try using a different HDMI cable or TV HDMI port.
  4. Check the display resolution settings (reduce resolution if the TV does not support 4K).
No sound
  1. Adjust the TV and STB volume (ensure mute is disabled).
  2. Confirm the HDMI audio is enabled in the STB's audio settings.
  3. Try a different audio output mode (e.g., AV) if applicable.
  4. Reconnect the HDMI cable.
Remote control not working
  1. Replace the batteries with new AAA batteries (check polarities).
  2. Point the remote control directly at the STB's IR sensor (no obstacles).
  3. Move closer to the STB (within 3 meters).
  4. For Bluetooth remotes, re-pair the remote with the STB using the setup wizard.
Wi-Fi connection issues (slow/unstable)
  1. Move the STB closer to the router to improve signal strength.
  2. Check the Wi-Fi password (case-sensitive).
  3. Restart the STB and router.
  4. Avoid using the STB near other wireless devices (e.g., microwaves, Bluetooth speakers) that may cause interference.
  5. Switch to a wired Ethernet connection for stability.
Slow device performance, apps crashing
  1. Close background apps (go to "Recent Apps" and swipe up to close unused apps).
  2. Clear app cache in the settings (Settings > Apps > Select App > Clear Cache).
  3. Update the device's firmware to the latest version.
  4. Perform a factory reset (back up data first).
USB device not recognized
  1. Ensure the USB device is formatted as FAT32 or NTFS.
  2. Reconnect the USB device to the STB's USB port.
  3. Try using a different USB port or USB device.
  4. Check if the USB device is damaged.

7. Specifications

Feature Specification
Brand NameDooerTak
ModelX96Q
CategorySet Top Box
OSAndroid 10.0
CPUAllwinner H313 Quad Core ARM Cortex A53
GPUG31 OPenGL3.2
Memory (RAM)1GB DDR3, 2GB DDR3
Internal Storage (ROM)8GB eMMC, 16GB eMMC
Max. Extended CapacityTF Card Up To 64GB
WirelessYes (2.4G Wifi)
Ethernet100M
BluetoothNo
Video Output PortsHDMI, AV
Max Resolution4K@60fps
Supported Internet ServicesNETFLIX, YouTube
GOOGLE CastYes
System UpgradeNo
OTA UpdateNo
Power SourceDC 5V, 2A
Voltage RangeLow voltage non-USB (below 75V DC, below 50V AC)
Inbox AdaptorYes
Remote ControlIncluded
Product Weight0.5kg
Package Weight0.35kg
Package Dimensions (L x W x H)15cm x 15cm x 15cm
CertificationCE
OriginMainland China

8. Maintenance

Proper maintenance ensures the longevity and optimal performance of your X96Q Smart TV Box.

  • Cleaning: Disconnect the power adapter before cleaning. Use a soft, dry, lint-free cloth to wipe the device. Avoid liquid cleaners, aerosol sprays, or abrasive materials.
  • Ventilation: Ensure the device has adequate airflow. Do not cover ventilation openings or place the device in enclosed spaces. Maintain at least a 10cm gap around the device.
  • Software Updates: Regularly check for system updates in the "System Settings" menu to ensure you have the latest features and security patches.
  • Cable Management: Avoid bending or pulling the power and HDMI cables excessively to prevent damage.
  • Storage: If storing the device for an extended period, disconnect it from power and store it in a cool, dry place within the recommended storage temperature range (-20°C to 60°C).

9. User Tips

Here are some tips to enhance your experience with the X96Q Smart TV Box:

  • Optimize Performance: If you notice the device slowing down, try closing unused background applications and clearing app caches from the settings menu.
  • Wired Connection for Stability: For the most stable internet connection, especially when streaming 4K content, consider using an Ethernet cable instead of Wi-Fi.
  • External Storage: Utilize the USB ports or TF card slot to expand storage for media files or applications. Ensure USB drives are formatted as FAT32 or NTFS for compatibility.
  • Remote Control Range: For IR remotes, ensure a clear line of sight between the remote and the TV box's IR sensor for optimal responsiveness.
  • Display Settings: If your TV supports it, set the display resolution to 4K@60fps in the display settings for the best visual quality.

10. Warranty and Support

For product support, warranty information, or to report issues, please contact the manufacturer or their authorized representative.

Manufacturer Information:

  • Manufacturer: Shenzhen Oder Technology Co.ltd
  • Address: 4D006, Building 1, No. 314 Pingji Avenue, Hehua Community, Pinghu Street, Longgang District, Shenzhen City, Guangdong Province.
  • Email: 1154213454@qq.com

EU Authorized Representative:

  • Representative: Apex CE Specialists GmbH
  • Address: Grafenberger Allee 277, 40237 Düsseldorf, DE Duesseldorf Nordrhein-Westfalen.
  • Email: Info@apex-ce.com

For a detailed PDF version of the user manual, please refer to the Item guides & documents section.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.