1. Safety Information
- Operation by non-professionals is strictly prohibited.
- Always disconnect power before any operation or installation.
- Avoid installation in damp environments to prevent electrical hazards.
2. Product Overview
The TLZWLA Circuit Breaker Fuse Reset is a waterproof, resettable circuit protection device designed for 12-48V DC systems. It serves as an alternative to traditional fuses, offering overload protection and manual circuit interruption capabilities for automotive, marine, and other DC applications.
Key Features:
- Controllable & Reusable: Can be manually turned off by pressing the push button and reset by setting the reset arm back.
- Overload Protection: Automatically trips when current exceeds the rated value.
- Safety and Reliability: Prevents damage to connected appliances.
- Fast Response: Promptly interrupts fault current.
- Waterproof: Designed for use in challenging environments.
Important Note:
Use the pushbutton to make the reset arm pop out for manual disconnection. Do not directly pull the reset arm out, as this may damage the breaker.
3. Specifications
| Attribute | Value |
|---|---|
| Amperage Ratings | 30A, 40A, 50A, 60A, 70A, 80A, 100A, 120A, 150A, 200A, 250A, 300A |
| Voltage Range | 12-48V DC |
| Material | Copper |
| Breaking Capacity | High |
| Use | Automotive, Marine |
| Certifications | CE, RoHS, SAE, UL |
| Waterproof Rating | IP67 |
| EU LVD Voltage | Below 50Vac or 75Vdc |
| Dimensions (approx.) | Length: 74mm (2.9in), Width: 44mm (1.73in), Height: 28mm (1.1in), Body Width: 48mm (1.89in) |
4. Setup and Installation
Before installation, ensure the power supply is completely turned off.
- If replacing an existing fuse, remove the old fuse from its holder.
- Position the circuit breaker in the designated mounting location and secure it firmly using the screw holes.
- Connect the wiring to the appropriate terminals. Refer to the wiring diagram below for correct connections.
- Ensure all electrical contacts are secure and tight.
- Once installed, test the circuit functionality before full operation.
Wiring Diagram Key:
- Connect to the Positive Pole: Input/Output terminal for the positive connection.
- Silicone Insulating Cap: Provides protection for the terminal.
- Manual Break Push Button: Used to manually trip the breaker.
- Reset Arm: Indicates breaker status and is used for resetting.
- Working Rated Current: The specified amperage rating of the breaker.
- Screw Hole: For mounting the breaker.
- Connect to the Negative Pole: Input/Output terminal for the negative connection.
5. Operating Instructions
- Automatic Overload Protection: The circuit breaker will automatically trip (the reset arm will extend) if the current flowing through it exceeds its rated value, protecting the circuit and connected appliances.
- Manual Disconnection: To manually disconnect power to the circuit, press the red push button. The reset arm will extend, indicating the circuit is open.
- Resetting the Breaker: After an overload or manual trip, push the extended reset arm back into its original position to restore power to the circuit.
6. Maintenance
- Never substitute the circuit breaker with other metallic objects or devices not designed for circuit protection.
- Regularly inspect the terminals and connections to ensure secure electrical contact. Loose connections can lead to overheating and poor performance.
- After any installation or replacement, always test the circuit functionality to ensure the breaker operates correctly and the circuit is protected.
- Keep the breaker free from dirt, dust, and moisture to maintain optimal performance, especially in marine environments.
7. Troubleshooting
- What to do if the circuit breaker trips?
The reset arm will extend. To reset, push the reset arm back into place. If the breaker trips immediately again, investigate the circuit for overloads or short circuits. Do not repeatedly reset a breaker without addressing the underlying issue.
- How to determine if the circuit breaker has tripped?
The reset arm will be extended. If it's not extended and there's no power, use a voltage tester to check for continuity across the breaker terminals to confirm its state.
- Does the circuit breaker act automatically above its amperage rating?
Yes, the circuit breaker is designed to automatically trip and interrupt the circuit when the current exceeds its specified amperage rating.
- What is the maximum voltage this switch works with?
This circuit breaker is rated for 12-48V DC systems.
8. User Tips
- Terminal Size: Be aware that the terminal size may be small. Ensure it is suitable for your specific 12V or 24V wiring setup, especially if using larger gauge wires.
- Initial Inspection: Upon receiving the product, carefully inspect it for any signs of damage before installation.
9. Warranty and Support
Product Warranty Period: This product comes with a one-year warranty from the date of purchase.
For further assistance or detailed information, you may refer to the official user manual PDF provided by the seller. This document can be found at the following link: TLZWLA Circuit Breaker User Manual (PDF).