UXCELL R-370

Contents

UXCELL R-370 Double Shaft Vibration Motor User Manual

Model: R-370

Brand: UXCELL

1. Introduction

This manual provides essential information for the safe and effective use of your UXCELL R-370 Double Shaft Vibration Motor. This DC 12V motor is designed to provide strong vibration, making it suitable for a variety of applications including electric toy models, dust cleaners, electrical tools, home appliances, toys, and massage machines. Please read all instructions carefully before installation and operation.

2. Safety & Warnings

To ensure safety and prevent damage, please observe the following warnings:

  • Read all instructions thoroughly before using the motor.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Avoid exposing the motor to moisture or liquids. Keep it dry.
  • Do not overload the motor beyond its rated specifications.
  • Avoid strong impacts or dropping the motor.
  • Ensure proper ventilation to prevent overheating, especially during prolonged use or at higher voltages.

3. Product Features

  • Stable performance and strong power output.
  • Designed for a long service life.
  • Dual-head design for effective vibration.
  • Versatile application in electric toy models, dust cleaners, electrical tools, home appliances, toys, and massage machines.

4. Specifications

Attribute Value
Model R-370
Material Metal
Rated Voltage DC 12V
Rated Speed 3000 RPM
Total Length 51mm / 2 inch
Body Size (D*H) 24.2mm x 30mm / 1 inch x 1.2 inch
Vibrating Wheel Size (L*W*H) 24mm x 17mm x 5mm / 0.9 inch x 0.7 inch x 0.2 inch
Type Micro Motor, High Torque Vibrating Motors, Double Shaft Dual Head
Usage BOAT, Home Appliance
Origin Mainland China
Certification NONE
Dimensional drawing of UXCELL R-370 vibration motor
Figure 1: Dimensional drawing of the R-370 vibration motor, showing total length (51mm/2"), body size (24.2mm/1" D, 30mm/1.2" H), and vibrating wheel size (17mm/0.7" W, 24mm/0.9" H). Rated Voltage: DC 12V, Rated Speed: 3000RPM.
Close-up of UXCELL R-370 vibration motor label
Figure 2: Close-up view of the R-370 vibration motor, showing the label with model R-370, DC 12V, 3000 RPM, and a 5mm/0.2" shaft diameter.

5. Setup & Installation

Follow these steps for proper installation:

  1. Align: Align the motor with your intended mounting position.
  2. Fix: Secure the motor using appropriate screws.
  3. Ensure Stability: Install the motor firmly to ensure stable operation and prevent unwanted movement or excessive noise during use.
  4. Check Connections: Ensure all electrical connections are secure and correctly polarized (positive to positive, negative to negative) for DC operation.
Angled view of UXCELL R-370 vibration motor
Figure 3: Angled view of the UXCELL R-370 vibration motor, illustrating its general appearance for mounting reference.

6. Operating Instructions

Once installed, connect the motor to a stable DC 12V power source. The motor will begin to vibrate at its rated speed of 3000 RPM. The intensity of vibration is directly related to the voltage supplied; higher voltage within the safe operating range will result in stronger vibration, but may also increase heat generation. Monitor the motor for any signs of overheating during operation.

7. Maintenance

The UXCELL R-370 motor is designed for low maintenance. However, regular checks can prolong its lifespan:

  • Keep Dry: Ensure the motor remains in a dry environment to prevent corrosion and electrical issues.
  • Cleanliness: Periodically clean any dust or debris from the motor's exterior to ensure proper heat dissipation.
  • Inspect Connections: Regularly check electrical connections for looseness or signs of wear.
  • Avoid Overload: Do not continuously operate the motor beyond its specified load to prevent premature wear and damage.

8. Troubleshooting

If you encounter issues with your motor, consider the following:

  • Motor Not Vibrating:
    • Check power supply: Ensure it is providing DC 12V and is correctly connected.
    • Check wiring: Verify all connections are secure and correctly polarized.
    • Inspect for obstructions: Ensure the vibrating wheels are not obstructed.
  • Excessive Heat:
    • Reduce voltage: If operating near the upper limit, slightly reduce the voltage.
    • Check for overload: Ensure the motor is not under excessive load.
    • Improve ventilation: Ensure adequate airflow around the motor.
  • Unusual Noise:
    • Check mounting: Ensure the motor is firmly installed and not vibrating against other components.
    • Inspect for damage: Look for any visible damage to the motor or vibrating wheels.

9. User Tips

  • For applications requiring precise vibration control, consider using a variable DC power supply.
  • Ensure the mounting surface is robust enough to handle the motor's vibration without causing structural fatigue.

10. Warranty & Support

For any questions, technical support, or warranty inquiries, please contact your retailer or the manufacturer directly. Refer to the contact information provided in the original packaging or on the product listing for details.

Manufacturer: Guangzhou Dajiali Network Technology Co., Ltd.

EU Authorized Representative: SUCCESS COURIER SL

A user manual PDF is available for download from the product page for more detailed information.

11. Frequently Asked Questions (FAQ)

Q: What is the recommended voltage for this motor?
A: The motor is rated for DC 12V. Operating at this voltage will provide the specified 3000 RPM.

Q: Can I use a higher voltage to get stronger vibration?
A: While higher voltage can increase vibration, it will also generate more heat and can potentially shorten the motor's lifespan. It is recommended to operate within the rated voltage range.

Q: Is this motor waterproof?
A: No, the motor is not waterproof. It should be kept dry and protected from moisture.

© 2023 UXCELL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.