EURS S25 LED Canbus Light 3014 144SMD

Contents

EURS LED Turn Signal Light User Manual

Model: S25 LED Canbus Light 3014 144SMD

1. Safety Information & Warnings

Please read all safety information carefully before installation and use. Failure to follow these instructions may result in electric shock, injury, or damage to the product or vehicle.

  • Disconnect Power: Always disconnect the vehicle's power supply (e.g., battery negative terminal) before attempting any installation or replacement to prevent electric shock.
  • Avoid Direct Eye Exposure: Do not look directly into the illuminated LED light, as it can cause eye injury due to its high brightness.
  • Vehicle Motion: Do not attempt to replace the headlight or turn signal bulb while the vehicle is in motion. Ensure the vehicle is safely parked and turned off.
  • Proper Specifications: Only use bulbs that meet the specified voltage and base type for your vehicle. Using incorrect bulbs may cause damage or malfunction.
  • Waterproofing & Dustproofing: Ensure proper waterproofing and dustproofing during installation to protect the bulb from environmental elements.
  • Avoid Frequent Cycling: To prolong the service life of the LED bulbs, avoid frequent on/off cycling.

2. Product Overview

The EURS S25 LED Canbus Light is a high-brightness, low-power consumption LED bulb designed to replace traditional incandescent bulbs in various automotive lighting applications, including turn signals, brake lights, and reverse lights. It features a built-in Canbus decoding driver to prevent error messages in compatible vehicles.

EURS LED Turn Signal Light with various base types

Figure 2.1: EURS LED Turn Signal Light showing common base types (1156, 1157, 7440, 7443, BAU15S).

Five different LED bulb types

Figure 2.2: Various EURS LED bulb types (1156, 1157, 7440, 7443, BAU15S).

3. Setup & Installation

  1. Unpack and Verify: After opening the package, carefully verify that all accessories and the correct bulb type are included and undamaged.
  2. Power Off: Ensure the vehicle's power supply is turned off and the engine is cool before proceeding.
  3. Remove Old Bulb: Carefully remove the existing incandescent bulb from its socket. Refer to your vehicle's owner's manual for specific instructions on accessing and removing bulbs.
  4. Install LED Bulb: Insert the new EURS LED bulb into the socket. Ensure it is seated firmly and correctly. These bulbs are designed for nondestructive installation.
  5. Test Functionality: Before reassembling any covers or panels, turn on the vehicle's power supply and test the operation of the newly installed LED bulb (e.g., turn on turn signals, brake lights, or reverse lights) to ensure proper functionality.
  6. Final Assembly: Once confirmed working, reassemble any removed covers or panels.
Installation steps from user manual

Figure 3.1: Visual guide for installation steps.

4. Operating Instructions

These LED bulbs are designed for direct replacement of original car bulbs. They provide instant full brightness and are available in multiple colors to suit different vehicle functions.

  • Function: Depending on the chosen color and base type, these bulbs can function as turn signal lights, brake lights, or reverse lights.
  • Brightness: Equipped with 144 high-brightness 3014 SMD LED chips, providing a 360° glow for enhanced visibility.
  • Colors: Available in White, Amber Yellow, and Red.
LED bulb lighting angles and colors

Figure 4.1: Illumination examples in White, Yellow, and Red, showing various lighting angles.

5. Maintenance

EURS LED bulbs are designed for durability and long life with minimal maintenance required.

  • Cleaning: If necessary, gently wipe the glass lens with a soft, dry cloth. Avoid abrasive cleaners.
  • Durability: Features a tempered glass mask for waterproofing and an aviation aluminum substrate for efficient heat dissipation and high-temperature resistance.
  • Longevity: To maximize the lifespan of over 20,000 working hours, avoid frequent on/off cycling.
Tempered glass mask and original binding plug

Figure 5.1: Features like tempered glass mask and original binding plug contribute to durability.

6. Troubleshooting

If you encounter issues with your EURS LED Turn Signal Light, please refer to the following common solutions:

  • Light Does Not Illuminate:
    • Check all wiring connections to ensure they are secure and correctly connected.
    • Verify the bulb is properly seated in its socket.
    • Ensure the vehicle's power supply is active.
    • Test the bulb in another known working socket if possible.
  • Light Beam Misalignment:
    • If applicable (for headlight applications), adjust the mounting position of the bulb or housing.
  • Bulb Failure:
    • If the bulb fails prematurely, it may need to be replaced. Contact customer support if it's within the warranty period.
  • Damaged / Defective Product:
    • If you receive a damaged or defective product, please contact customer support immediately with a picture of the issue for assistance.

7. Specifications

Basic product parameters and plug differences

Figure 7.1: Basic product parameters and plug differences for 1156, 1157, and BAU15S.

Product Specifications
Feature Description
Product NameLED Turn Signal Light
Item TypeSide Mirror Signal Blinker, Brake Lights Assembly
Model NameLED Turn Signal, Brake Light, Reverse Light
Light ColorWhite, Red, Amber Yellow
Number of Beads144SMD (3014 Chip)
Input Voltage12V DC (12-24V compatible)
Product Current5A / 12V
Service Life>50000 hours (20000 working hours)
Luminous Angle360° glow
Socket Type / Base Type1156 BA15S P21W, 1156 BAU15S PY21W, 1157 BAY15D, T20 WY21W 7440, T20 W21W 7443
LumensApprox. 2800LM
Color Temperature6000K
Special FunctionCanBus (Built-in decoding driver)
Installation MethodNondestructive installation
Dimensions (approx.)15mm (diameter) x 52-56mm (length, varies by type)
CertificationsCE/ROHS Compliant
OriginMainland China
Dimensions for each bulb type

Figure 7.2: Detailed dimensions for each LED bulb type.

8. User Tips

  • Verify Compatibility: Always double-check your vehicle's bulb type and dimensions before purchasing to ensure perfect fitment.
  • Test Before Final Assembly: It's good practice to test the LED bulbs after installation but before fully reassembling any vehicle panels or covers.

9. Warranty & Support

EURS products are manufactured to high-quality standards. We offer the following support:

  • Warranty Period: This product comes with a 12-month (one-year) warranty from the date of purchase.
  • Defective Products: Defective products due to quality issues are eligible for return or exchange within the warranty period.
  • Contact Support: If you encounter any problems with your product within the guarantee period, please feel free to contact our customer support. We are committed to helping you resolve any issues.

For further details or to download the official user manual, please refer to the provided PDF document: User Manual (PDF).

© 2023 EURS. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.